Instructions / Assembly

10
Attaching the fan motor assembly
to the mounting bracket
45
Tightening screws and attaching
the canopy ring
□ Slip the canopy ring (C) onto the fan motor assembly
(B).
□ Loosen two of the four mounting bracket screws (BB)
from the mounting bracket (A), and remove the other
two screws (BB).
□ Remove the fan motor assembly (B) from the mounting
bracket (A) hook, and engage the key holes with the
two mounting bracket screws (BB) previously
loosened.
□ Install the two mounting bracket screws (BB)
previously removed, and tighten all four mounting
bracket screws (BB).
□ Raise up canopy ring (C) and line up the four tabs
with the four grooves on the canopy. Once lined up,
slide the canopy ring (C) up to the canopy until snug.
B
C
Assembly — Hanging the Fan (continued)
A
B
C
BB
BB