Free Shipping Ships in 2-10 Days All Plywood Construction Soft Close Doors & Drawers 45 Door Styles 2016 SPECIFICATION GUIDE READY-TO-ASSEMBLE KITCHEN AND BATH CABINETRY hdckitchens.
Ready-to-Assemble Kitchen & Bath Cabinetry 5 Year Limited Warranty Home Decorators Collection Cabinetry (warrantor) warrants to the original consumer purchaser only, that the Home Decorators Collection branded Ready-to-Assemble (RTA) products will be free from defects in material and workmanship. This warranty is for a period of five years as long as you own the cabinetry and is not transferable to subsequent owners.
Table of Contents Door Styles & Colors ..........................................................................................4-7 Construction Details .............................................................................................. 8 Finished Ends ........................................................................................................ 9 Wall Cabinets .................................................................................................10-13 Base Cabinets ........
Ships in 2-3 Days! Quick Ship Door Styles Ancona - Birch Available Colors: • 3/4" thick x 2" wide solid birch frame wall and base doors with solid birch raised center panels • 3/4" thick birch veneer over MDF flat panel drawer fronts with solid birch edging • Concealed hinges with 6-way adjustment and Soft Close damper Mocha (AMG) • 5/8" thick plywood drawers with full-extension Soft Close runners • Full Overlay door style – decorative hardware required Cumin (ACN) Anzio - MDF/Thermofoil Available C
Ships in 2-3 Days! Quick Ship Door Styles Elice - Birch Available Colors: • 3/4" thick x 3" wide solid birch Shaker frame wall and base doors with birch veneer over MDF recessed center panels • 3/4" thick birch veneer over MDF flat panel drawer fronts with solid birch edging Mocha (EMG) • Concealed hinges with 6-way adjustment and Soft Close damper • 5/8" thick plywood drawers with full-extension Soft Close runners • Full Overlay door style – decorative hardware required Cumin (ECN) Elice - Painted M
Ships in 7-10 Days! Monaco - Laminate Special Order Door Styles The styles on this page are available in the following DESIGNER SERIES and ARCHITECT SERIES colors: DESIGNER SERIES Bianco (BO) Almond (AL) Cognac (CC) Cherry (CH) *Architect Series with 3D Wood Grain Texture • 3/4" thick particleboard flat panel wall and base doors with durable thermo-fused melamine finish • 3/4" thick particleboard flat panel drawer fronts with durable thermo-fused melamine finish • Concealed hinges with 6-way adjustme
Ships in 7-10 Days! Dolomiti - Laminate Special Order Door Styles • 3/4" thick wrapped MDF frame wall and base doors with recessed melamine faced MDF center panel The styles on this page are available in the following DESIGNER SERIES colors: • 3/4" thick wrapped MDF frame drawer fronts with recessed melamine faced MDF center panel • Concealed hinges with 6-way adjustment and Soft Close damper • Full Overlay door style – decorative hardware required 2-3/8" ¼" 7/8" Livorno - Laminate Pillow Top Profile
Quick Assembly Cabinet Construction END PANELS 3/4" thick plywood, unfinished birch veneer exterior* INTERIOR FINISH Natural birch veneer with durable clear coat BACK PANEL 3/16" thick plywood ADJUSTABLE SHELVES 3/4" thick plywood FIXED SHELVES 3/4" thick plywood with hardwood dowels INSTALLATION RAILS 3/4" thick plywood, dowelled in place behind back panel Cabinets are packed flat in Ready-to-Assemble (RTA) kits: BACK BEAM 3/4" thick plywood, grooved to capture back panel END PANELS 3/4" thick plywo
Color Matched Finished Ends WALL All cabinet exterior sides are unfinished birch veneer. Exposed sides, which will be visible after installation, will require a Finished End panel. These panels are 3/4" thick with matching finish on both faces and all four edges. Please make allowances for this additional thickness when designing! FINISHED END CABINET TOP VIEW DOOR Wall Finished Ends are 13" wide which will extend beyond the front edge of 12" deep wall cabinets, flush with the face of the door.
Wall Cabinets 18" High Double Door WALL CABINET CODING W3018 STANDARD (12" DEEP) 30" W 30 30 Cabinet Cabinet Cabinet Code Width Height 12" 18" · Standard wall cabinets are 12" (305 mm) deep.
Wall Cabinets 30" High Single Door 30" High Wall Pull-down Shelves Frosted ", 18" 12", 15 W1230 W1530 W1830 12" 24" W2430-PDSFR 12" - Features 5 removable acrylic storage bins - Lowers items 10" and brings forward 14¾" - Gas assisted mechanism smoothly raises and lowers unit - Install at desired height in cabinet 30" 30" - Two ¾" thick plywood adjustable shelves - Can be assembled with hinges on left or right 38" High Single Door 30" High Double Door 0", 36" 24", 3 W2430 W3030 W3630 12" 12"
Wall Cabinets 38" High Wall Pull-down Shelves Chrome 24" W2438-PDSCR 12" - Two tier chrome shelves lowers 10" and brings items forward 14¾" - Gas assisted mechanism smoothly raises and lowers unit - Locking arm feature holds shelf in down position - Install at desired height in cabinet 38" 38" High Wall Pull-down Shelves Frosted 24" - Features 5 removable acrylic storage bins - Lowers items 10" and brings forward 14¾" - Gas assisted mechanism smoothly raises and lowers unit - Install at desired height
Wall Cabinet Trim Items Range Hood Combo Kit - Straight Valance 9.69" " 31 able mm Tri - Available 36" width - Includes Hood, Chimney, Hood Liner and Blower - Chimney is trimmable to adjust the height - Blower is 390 CFM, 6.0 sones, enclosed light - Available in CN, MG and PW only - Clearance of 3" on each side is recommended 19.32" 10.84" " .88 22 " 19" 20.08" WFE1330A WFE1338A WRHC36S " .38 17 Wall Finished Ends 36 " .
Base Cabinets Single Door with 1 Drawer and 1 Roll-Out Tray BASE CABINET CODING B 18 - 2T Cabinet Code Cabinet Width B15-1T B18-1T " 15", 18 23 7�8" Customization (2ROTS) · Standard Base Cabinets are 23-7/8" (605 mm) deep and 34½" high 34½" · Add door thickness for total cabinet depth · All drawers feature Full-Extension Soft Close drawer runners · Standard cabinet exterior is unfinished veneer, exposed sides require Finished Ends - Can be assembled with hinges on left or right - One half depth a
Base Cabinets Single Door Base with 1 Drawer & 2 Wire Roll-Out Trays " 15", 18 Double Door with 1 Drawer & 1 Roll-Out Tray B15-2WT B18-2WT 23 7�8" 24" 34½" 23 7�8" B24-1T 34½" - One full width drawer with two drawer fronts - One half depth adjustable shelf - One adjustable roll-out tray with Full-Extension runners - Can be assembled with hinges on left or right - Two chrome finish wire roll-out trays - Features Full-Extension runners Single Door with 1 Drawer & 2 Tier Cookware Organizer 15" Dou
Base Cabinets Double Door with 1 Drawer & 2 Wire Roll-Out Trays 24" Single Door with 1 Drawer & Single Waste Basket Pull-Out B24-2WT 23 7�8" B15-SWB B18-SWB " 15", 18 23 7�8" 34½" 34½" - Can be assembled with hinges on left or right - Door mount kit included to mount cabinet door to waste container - Features Full-Extension Soft Close ball-bearing slides - 35 quart container is removable for easy cleaning - Two full width chrome wire roll-out trays - Features Full-Extension runners Double Door w
Base Cabinets Deluxe Sink Base with Shelf Liner " 30", 36 Deluxe Sink Base with 2 U-Shape Pull-Outs SB30-SL SB36-SL 23 7�8" 341/2" SB36-2USWP 36" 23 7�8" 34½" - No shelf, two false drawer fronts - Liner helps protect cabinet from damage due to leaks in pipes or drain - Grey polystyrene easy to clean surface - No shelf, two false drawer fronts - Two full-width chrome wire U-shaped pull-out baskets fit around plumbing under sink Sink Base with Pull-Out Caddy " 30", 36 36" x 36" Easy Reach Corner
Base Cabinets Blind Corner Base Base Finished End 42" 36" 23 7�8" BBC42 BFE2534A - 3/4" thick plywood for CN, MG, and PW - 3/4" thick melamine faced particleboard all other colors - Matching finish 2 sides and all 4 edges - Field modified and installed - 35" of loose matching edge tape included 34½" 34½" 25" - Can be assembled with blind on left or right (right shown) Cabinet can be pulled for exact fit (42"-45") One half depth adjustable shelf 21" wide blind closure panel included 6" filler and 3"
Base Cabinets Island Skin ISK4848 ready-to-assemble design tip - 3/16" thick matching exterior Field modified and installed Available in all finishes CN and MG are veneer faced plywood - PW is painted plywood - All other colors are melamine over MDF 48" 48" Island V-Groove Skin IVGSK4848 - 3/16" thick wood veneer v-groove exterior - Grooves spaced 1¼" on center 48" - Field modified and installed - Available in CN, MG and PW only 48" Our finished end panels are 3/4" thick, so adding them to unfi
Tall Cabinets PANTRY CABINET CODING 84" high Two Door Pantry with 4 Roll-out Trays 18" 23 7�8" P 18 24 84 - Can be assembled with hinges on left or right - One fixed and four adjustable shelves - Four rollout trays Cabinet Cabinet Cabinet Cabinet Code Width Depth Height 84" · Standard Pantry Cabinets are 23-7/8" deep - Exposed sides require TFE2584 · Add door thickness for total cabinet depth · Standard cabinet exterior is unfinished veneer, exposed sides require Finished Ends NOTE: Lower door in
Tall Cabinets 92" high Two Door Pantry with 2 Roll-out Trays 18" 23 7�8" Rollout Tray Kits P182492-2T ROTK18 - Can be assembled with hinges on left or right - One fixed and four adjustable shelves - Two rollout trays 92" - Exposed sides require TFE2592 NOTE: Lower door in Monaco and Genoa styles is (2) panels joined together 92" high Two Door Pantry with 4 Roll-out Trays 18" 23 7�8" 4" 20" - Full-Extension Soft Close undermount runners Fits 18" wide base and tall cabinets 5/8" thick plywood con
Vanity Base Cabinets Vanity Sink Base with Pivot Waste Bin VANITY CABINET CODING " 30", 36 VSB 30 21 Cabinet Code Cabinet Width VSB3021-1PWB VSB3621-1PWB 21" Cabinet Depth 341/2" · Standard Vanity Base Cabinets are 21" deep and 34½" high · Add door thickness for total cabinet depth · Standard cabinet exterior is unfinished veneer, exposed sides require Finished Ends · All cabinet interiors are natural birch veneer · See page 33 for items required to build each model Vanity Sink Base - No shelf,
Decorative Moldings Classic Crown Molding Crown Molding CCM8 CM96A 25/8" 8' 8' TMMS8 1" x 2" 3" 35/8" ¾" Framing Strip Finished End - 3/4" thick solid wood - Install at top of Framing Strip - Recommended Top Molding Mounting Strip TMMS8 (pg. 24) - Available in CN, MG and PW only Framing Strip - Angle Crown Molding 1" x 2" Finished End 3/4" thick solid wood Install at top of Framing Strip Recommended Top Molding Mounting Strip TMMS8 (pg.
Decorative Moldings Top Molding Mounting Strip TMMS8 Light Rail LR96A ½" 8' Mounting Strip ¾" 8' ¾" Molding 2¼" 13/16" - 3/4" thick solid wood - Can be used with ACM8, CM96A, CCM8 and SCM8 Wrapped Cove Molding ¾" - Solid wood Install along bottom framing strip of wall cabinets Available in CN, MG and PW only BO, CC, CH, and ES available in Wrapped Universal Light Rail (ULR96), see below Wrapped Universal Light Rail CVM96A ULR96 1½" 1" 2¼" 3¼" ¾" 3" ¾" - - 96" in length Laminate wrapp
Decorative Moldings Corbel CBL 61/16" Wood Outside Corner Molding OSC8 5¾" ¾" 8' ¾" 87/8" ¼" - 3/4" thick solid wood - Available in AL, CN, MG and PW only - BO, CC, CH, and ES colors are available in Wrapped Outside Corner Molding (OC96A), see below - Solid hardwood - Available in CN and MG only Wood Scribe Molding Wrapped Outside Corner Molding SM96A ¼" 8' OC96A ¼" ¾" 1" ¾" 1" - 1/4" thick solid wood - Available in AL, CN, MG and PW only - BO, CC, CH, ES and MA are available in Wrapped
Decorative Moldings Wood Inside Corner Molding Wood Batten Molding ICM8 8' BM8 8' ¾" ¼" ¾" ¾" - 3/4" thick solid wood - Available in CN, MG and PW only - BO, CC, CH, ES and MA colors are available in Wrapped Inside Corner Molding (IC96A), see below Wrapped Inside Corner Molding IC96A - 1/4" thick solid wood - Available in CN, MG and PW only Wood Furniture Base Molding FBM8 3/16" ¾" 8' ¼" ¾" - 4" 3½" ¾" 96" in length Paper laminate wrapped MDF core Available in BO, CC, CH, ES and MA color
Interior Accessories 24" Pull-down Shelves Chrome Single 35 Qt.
Interior Accessories 2-Tier Cookware Organizer for 15" Base Single Wire Roll-out Tray for 24" Base 2TCWO15-CR 18 1�8" 22" 11 5 �8" - Adjustable dividers to accommodate different sizes of cookware - Bottom, side and rear mount for total stability - Heavy-gauge wire construction - Two tiers operate independently 2-Tier Cookware Organizer for 24" Base SWROT24-CR 6 5 � 8" 22" 20 3 �8" - Full-extension 100lb.
Interior Accessories Undersink U-shaped Wire Pull-out Shelf 15 Liter Pivot Waste Bin USWPK36-CR RPOVWB15L - Perfect for vanity or kitchen applications - Pivot-out design opens lid when cabinet door is opened - Chrome finish - Features an inner polymer container with handle for easy removal 4¼" 5 5�8" 15½" 21¾" 32½" 10½" - Fits in 36" cabinet - Fits around obtrusive plumbing under the kitchen sink Double Wire Lazy Susan Kit - Chrome Kitchen Sink Base Liner DWLSK-CR 2¾" 23¼" 17 7�8" 28" - SBL2
Required Items List Wall Cabinets Pantry Cabinets Model Required Items Model Required Items W3012 1 x W3012 Cabinet Kit 1 x Door Pack Q 1 x W3612 Cabinet Kit 1 x Door Pack R 1 x W3015 Cabinet Kit 1 x Door Pack S 1 x W3018 Cabinet Kit 1 x Door Pack T 1 x W3021 Cabinet Kit 1 x Door Pack U 1 x W3621 Cabinet Kit 1 x Door Pack V 1 x W3024 Cabinet Kit 1 x Door Pack W 1 x W1230 Cabinet Kit 1 x Door Pack A 1 x W1530 Cabinet Kit 1 x Door Pack B 1 x W1830 Cabinet Kit 1 x Door Pack D 1 x W2430 Cabinet Kit 2 x D
Required Items List Base Cabinets Model Required Items Model Required Items B12 1 x B12 Cabinet Kit 1 x Door Pack I 1 x BD12 Cabinet Kit 1 x Door Pack L 1 x B15 Cabinet Kit 1 x Door Pack J 1 x B15 Cabinet Kit 1 x Door Pack J 1 x ROTK15 Rollout Tray Kit 1 x B15 Cabinet Kit 1 x Door Pack J 2 x ROTK15 Rollout Tray Kit 1 x B15 Cabinet Kit 1 x Door Pack J 1 x PWBK-S35 Waste Bin Kit 1 x B15 Cabinet Kit 1 x Door Pack J 1 x PWBK-D27 Waste Bin Kit 1 x BD15 Cabinet Kit 1 x Door Pack M 1 x B18 Cabinet Kit 1 x Doo
Decorative Hardware - Brushed steel - Euro railing pull - Brushed nickel - Brushed nickel - Features dual mounting hole options DH45-100 - 7" Euro Pull DH44-346 - 8" Square Bar Pull DH116-120 - 10" Quadra Pull 3¾" center (96mm) 7½" center (196mm) 5" inside center (128mm) 8-13/16" outside center (224mm) DH45-102 - 10" Euro Pull 6-15/16" center (176mm) DH45-104 - 13" Euro Pull DH44-348 - 9" Square Bar Pull 8-13/16" center (224mm) DH116-122 - 11" Quadra Pull DH44-350 - 13" Square Bar Pull 6-5/16
Decorative Hardware DH43-826 DH43-630 - Elongated oval knob - Antique pewter - 2" length - Elongated oval knob - Oiled bronze - 2" length DH43-828 DH43-632 - Classic pull Antique pewter 3-3/4" center (96mm) 4-3/4" outside length - DH43-824 - 1" Backplate for DH43-828 - Antique pewter - 3¾" center (96mm) - 5¼" outside length Screw-head cup pull Antique pewter 2-1/2" center (64mm) 4-1/8" outside length DH99-188 - Round knob - Brushed nickel - 1-1/4" diameter DH99-128 - Contemporary bow pull Bru
Decorative Hardware DH65-432 DH65-200 - Birdcage knob - Stainless steel - 2-1/2" length - Birdcage knob - Antique iron - 2-1/2" length - Arrowhead knob - Antique pewter - 3-1/2" length DH65-120 DH65-402 - DH88-104 Birdcage pull Stainless steel 3-3/4" center (96mm) 4" outside length - DH95-144 Birdcage pull Antique iron 3-3/4" center (96mm) 4" outside length DH87-102 - Square dimpled knob - Matte nickel - 1-1/4" square DH88-110 - Arrowhead pull Antique pewter 5" center (128mm) 7-1/2" outside
Notes 35
hdckitchens.
