Use and Care Manual

Full Extension RunnersFull Extension Runners

1. Remove drawer from cabinet. 3. Insert drawer and fully close. Open and

close repeatedly to align runners.

2. Firmly grasp runners at rear of cabinet and

slide toward center of cabinet.

If additional adjustment is required, loosen

screws and twist drawer front for proper

alignment. Tighten screws securely.

2. Reach underneath drawer box at front

and locate runner releases on each side

of drawer box. Squeeze release tabs and

remove drawer.

1. Partially open drawer. 3. Firmly grasp runners at rear of cabinet

and slide toward center of cabinet.

(Shown without countertop for clarity)

Drawer front adjustment

rawer Adjustment

Standard Runners

(Shown without countertop for clarity)

NOTE:

ADJUST DRAWER FRONT BEFORE

INSTALLING DECORATIVE HARDWARE.