USE AND CARE GUIDE Bloomsbury 14in. single door linen cabinet in Weather Oak @ Questions, problems,missing parts? Before resuming to your realistically our customer service department at 1-888-336-8318, p.m. THANK YOU Woe appreciate the trust and confidence you have paced in Home Decorators Collection through the purchase of this Wall Cabinet.We strive to continually create quality products designed to enhance your home.Visit us see our fool line of products available for your home improvement needs.
Table of Contents Planning Assembly . Dimensions. Tools Required. Hardware included Package contents . . Safety Information Installation 56 Maintenance. . . ..7 Care and Cleaning .7 IMPORTANT HEALTH NOTICE 7 Read and understand these instructions before attempting to install or use this product. Warranty A CAUTION Use caution when /sifting heavy abject. Lifting. ‘Heavy objects improperly could cuss serious injury. NOTE: Han die with care.
Pr-Assembly PLANNING INSTALLATION Chock the wall cabinet for damage before installation. if any part of the wall cabins is missing or damaged, contact the Customer Service Team st 1-809-336-8513. DIMENSIONS < Tgn @%\ 65" [1651] TOOLS REQUIRED screwdriver Hammer Safety @ Phillips goggles
Pr-Assembly HARDWARE INCLUDED @ NOTE Hardware nal shown o actual size. PART DESCRIPTION QUANTITY SHELF SUPPORTS 4 SCREW HOOK ANCHOR SCREW I|e|mmo|o PLASTIC TIE LI SERENENESS PACKAGE CONTENTS PART DESCRIPTION QUANTITY A MAIN BODY 1 B SHELVES 1 4 Please contact 1-888-336-8318 for further assistance.
Installation 1 Preparing the main body. 2 Leveling the main body. o Place the main body(A) in the desired o Twist the adjustable feet to ensure that main body location. is elev and steady. o Open the cabinet doors and remove the foam. 3 Assemble the shelve. O Insert the 4 shelf brackets (C} into the desired holes. Ensure that all the shelf brackets (C} are level. o Gently insert the shelve (B) into the main body (A).
Installation 4 Assemble anti-tip hardware. o Drill 4 holes in the wall, see hook (E) and harvest top The pitch and height of the panel. O Insert 4 anchor points (F) into the holes in the wall. o Fit the two hooks (E} into the holes in the wall, then Screw the 4 screws (G) into the anchor (F). o Connect 2 hooks (E) to the rear panel Screw (D) is tightened. o Connect the two hooks(E) with a plastic belt{H).
Maintenance o If your furniture is stained or otherwise damaged during use, contact a professional for repairs. Care and Cleaning a Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polishes is not necessary. Should you choose to use polishes, test the polish in an inconspicuous area before using over the entire surface of the product. Using solvents of any kind on your furniture may damage the finish.
HOME DECORATORS COLLECTION Questions, problems,missing parts? Before returning to your realistically our customer service department at 1-888-336-8318, p.m.