Use and Care Manual

Lighting a Fire

WARNING: If these instructions are not followed exactly,

personal injury or loss of life.

1. Make sure the control knob is in the “OFF” position. Open the

tank valve all the way.

2. Push in the igniter button. You will hear a slight clicking

sound. With the igniter button pushed in, push and turn the

and continue to hold the control knob in for 10 to 15 seconds.

Release the control knob. The control knob should pop back

again.

position and turn off the tank valve.

FLAME APPEARANCE

Care and Cleaning

To clean the burner, use a soft brush after the burner has cooled completely. Never use a vacuum cleaner on the burner. It is recommended

and removed from the appliance before the appliance can be stored indoors.

PAGE 1
Lighting a Fire WARNING: If these instructions are not followed exactly, personal injury or loss of life. 1. Make sure the control knob is in the “OFF” position. Open the tank valve all the way. 2. Push in the igniter button. You will hear a slight clicking sound. With the igniter button pushed in, push and turn the and continue to hold the control knob in for 10 to 15 seconds. Release the control knob. The control knob should pop back again. 3. 4. position and turn off the tank valve.