Installation Guide

Attaching the small shelf

Place the Shelf pins (JJ) into the holes of the

Lower side panel (G) and Left and Right partition

(H&I) at the middle row. (You may choose the

upper or lower row according to your needs, but

the height of both Small shelves (K) should be

consistent).

Then, place the Small shelf (K) carefully into the

mantel with the smooth side facing the front of

the mantel. (If there is difficulty, you may slightly

move the Lower side panel (G) and Left and Right

partition (H&I).) Make sure the Small shelf (K)

sits on the Shelf pins (JJ).

Adjust all parts, bring the Left and Right partition

(H&I) towards center, and tighten all bolts in this

step (Step 2-6).

Turning the mantel upright

With assistance from other adults, turn the

mantel upright.



Assembly (continued)

Note: Hold the Small shelf

(K) while turning to avoid

dropping.