Installation Guide

E
GG
B
L
9
Installing the back panel
Attach the Top back panel (D) and Bottom back
panel (E) to the back of the mantel by using
Round head screws (GG) and a screwdriver (not
provided). Make sure the smooth side of the
back panels face the front of the fireplace.
10
Attaching the door hinge
Place the Door (L) facing down on a soft and
smooth surface. Ensure the holes on the Door
hinge (LL) and the punctures on the Door (L)
align.
Attach together with Flat head screws (II) and a
screwdriver (not provided).
Please tighten all screws in this step.
󱤳󴰩󴸋󱷆󰒴󱯧󳘗󰷑󰟲󲕺󱹽󴖈󲴭󱔜󴸋󰒳󱤳󰪱󴺪
󱊶󲔿󱖾󱇽󰗶󳘗󲯑󳹣󳐛󰢩󰒶󱩹󰙄󰬵󱔜󴻖󳹣󳐛
󳏭󳅴󴛂󲈎󴶩󴀪󱮙󳑳󳹣󳐛󵞼󱀫󰶿󱣩󲿣




Please contact 1-800-986-3460 for further assistance
HOMEDEPOT.COM/HOMEDECORATORS
11
Assembly (continued)
Note: If the fireplace mantel is sloping,
it is normal. Please move the mantel
straight (90 degree angle) when
installing back panels.
Place the Bottom back panel (E) so it is
fully in the groove of the Base (B) and
the groove of the Lower side panel (G).
There should be no space between the
grooves and back panels.
Center the Top back panel (D) and
make sure the bottom edge is flush
against the top edge of the Bottom
back panel (E).