Installation Guide

14
Operation
Remote Control (N)
Control Panel on electric fireplace insert (M)
< > Turns the flame and logs On/Off.
< or BRIGHTNESS> Controls the brightness of the flame and logs.
<HEAT> Controls the functions of the heater. Press the button once to set the heater to HIGH (1,500 watts/hour). Press the
button twice to set the heater to LOW (750 watts/hour). Press the button three times to turn the heater OFF.
<TIMER> Controls the duration of the heater timer. Press the TIMER button to increase the timer setting by 1 hour. (The
settings are from 0 hour to 8 hours). When the control panel shows "0H", the TIMER function has not been activated.
<UP> increases the temperature. Press once to increase the temperature by F. Press and hold to scroll through the

<DOWN> decreases the temperature. Press once to decrease the temperature by F. Press and hold to scroll through the

WARNING-The fireplace must be properly installed before it is used.