Installation Guide
I
J
I
1
Installing the rail and partition
H
With assistance from other adults, place the
Right partition (I) upside down on a soft and
smooth surface.
Align the holes on the Rail (J) and the punctures
on the Right partition (I) and push together until
flush.
Attach together with Flat head screws (MM)
using screwdriver (not provided).
Tighten all the flat head screws in this step.
Repeat the above steps to attach another Rail (J)
to the Left partition (H).
MM
2
Attaching the big shelf
With assistance from other adults, hold the Big
shelf (C) vertically.
Correspondingly insert tenons of the Left
partition (H) into holes of the Big shelf (C).
Slightly move parts, and ensure the holes of the
Left partition (H) and the holes of the Big shelf (C)
align.
Attach together with Flat washers (CC), Spring
washers (BB), and Bolts (AA) using a Hex wrench
(DD).
Do not tighten all bolts in this step for later
adjustment.
Repeat the above steps to attach the Right
partition (I) to the Big shelf (C).
,(C)
(H)(C)
(H)(C)
(DD),(CC),(BB)
(AA)
(I)(C)
2.
Please contact 1-800-986-3460 for further assistance
HOMEDEPOT.COM/HOMEDECORATORS
7
Assembly