Installation Guide

C
H
I
G
G
C
G
C
H
G
3
Attaching the lower side panel
With assistance from other adults, place the
Lower side panel(G) on a smooth and soft
surface with the smooth end on top.
Insert the wooden tenons into the corresponding
holes of the Big shelf (C). Slightly move parts to
ensure the holes of the Lower side panel (G) and
the holes of the Big shelf (C) align.
Attach together with Flat washers (CC), Spring
washers (BB), and Bolts (AA) using a Hex wrench
(DD).
Do not tighten all bolts in this step for later
adjustment.
Repeat the above steps to attach another Lower
side panel (G) to the Big shelf (C).
4
Attaching the base
With assistance from other adults, slightly move
parts to insert the wooden tenons of the Lower
side panel (G) and Left and Right partition (H&I)
into corresponding holes of the Base (B).
Attach together with Flat washers (CC), Spring
washers (BB), and Bolts (AA) using a Hex wrench
(DD).
Do not tighten all bolts in this step for later
adjustment.
󰷑󰕿󰕣󱔔󰥒󰒴,󳂶󱙗󱫕󰥾󴟶󰖟,󱊰󰒴󰜝󱸨(G)󰬵󱒏󰪜󰓖
󳅴󱸨(H&I)󰒳󲴭󱷑󲁔󱩻󰠎󱔾󱕐(B)󱊶󱡲󲴭󱷑󲁔󱇽󰠐.󲯑
󱤜󱣴(DD),󱔜󲕺󰪡(CC),󱗱󳪘󰪡(BB)󰬵󳹣󱷯(AA)󳏭󳅴,
󴛂󲈎󰒶󴀪󱮙󳑳󳹣󱷯󰖎󰙨󱘵󳔵󴅨󱰝.󱀫󰶿4󱣩󲿣.








8
Assembly (continued)