Item #1003046429 #1003046335 Model #BVGL2068 #BVRL2068 USE AND CARE GUIDE BRAYLEE LINEN CABINET Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HomeDecorators THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this cabinet.
Table of Contents Assembly.......................................................................4 Maintenance...................................................................6 Care and Cleaning...........................................................6 Table of Contents .............................................................2 Safety Information............................................................2 Lifetime Limited Warranty.................................................
Pre-Assembly TOOLS REQUIRED Pencil Claw hammer Tape measure Phillips screwdriver HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA Part BB DD CC Description Quantity EE Part FF Description Quantity AA Shelf pin 12 DD Anchor 1 BB Short screw 1 EE Long screw 1 CC Bracket 2 FF Tie 1 PACKAGE CONTENTS A Part B Description C Quantity A Cabinet 1 B C Exterior shelf Interior shelf 2 1 3 HOMEDEPOT.
Assembly 1 Installing the shelves □ □ □ □ Insert 4 shelf pins (AA) into 4 pre-drilled holes in the upper half of the open space in the cabinet (A) at the desired height. Slide a shelf (B) into the cabinet (A) above the pins (AA). Repeat with 4 more shelf pins (AA) and shelf (B) in the lower half at the desired height. Repeat with the remaining 4 shelf pins (AA) and interior shelf (C) inside the cabinet (A).
Assembly (continued) 3 Attaching the brackets □ Center a bracket (CC) against the back of the cabinet (A) along the top edge. □ Insert the short screw (BB) through the space in the bracket (CC), and screw into the cabinet (A) using a screwdriver. □ Measure the height of the bracket (CC) from the floor using a tape measure. □ Measure this same vertical distance on the wall where the cabinet (A) will stand against, and mark with a pencil.
Assembly (continued) 5 Removing the drawers (optional) □ Fully extend the drawer. □ Pull the two latches outward on the underside of the drawer to release the lock. □ Simultaneously tilt and lift the drawer upwards to pull it out of the cabinet (A). Maintenance To protect your bath furniture, we suggest . the following: □ Avoid placing your furniture in direct sunlight, as sunlight causes fading. □ Clean up spills immediately. Use a blotting rather than a wiping action.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HomeDecorators Retain this manual for future use.
Artículo núm. 1003046429 1003046335 Modelo núm. BVGL2068 BVRL2068 GUÍA DE USO Y MANTENIMIENTO GABINETE PARA LENCERÍA BRAYLEE ¿Preguntas, problemas o piezas faltantes? Antes de devolver a la tienda, comunícate con el servicio al cliente de Home Decorators Collection De lunes a viernes, entre 8:00 a.m. y 7:00 p.m. (hora estándar del Este), y los sábados de 9:00 a.m. a 6:00 p.m. (hora estándar del Este) 1-800-986-3460 HOMEDEPOT.
Tabla de contenido Tabla de contenido ...........................................................2 Información de seguridad..................................................2 Garantía limitada de por vida.............................................2 Aviso importante para la salud..........................................2 Preensemblaje..................................................................3 Herramientas necesarias.................................................3 Herrajes incluidos..............
Pre-Assembly Preensemblaje HERRAMIENTAS NECESARIAS Lápiz Martillo de uña Cinta de medir Destornillador Phillips HERRAJES INCLUIDOS NOTA: No se muestra el tamaño real de los herrajes.
Ensamblaje 1 Como instalar los estantes □ Inserta 4 pasadores de estante (AA) en los 4 orificios pretaladrados a la altura deseada dentro del gabinete (A). □ Desliza el estante exterior (B) dentro del gabinete (A) sobre los pasadores (AA). □ Repite con 4 pasadores de estante más (AA) y el estante exterior (B) en la mitad inferior de la altura deseada. □ Repite con los 4 pasadores de estante restantes (AA) y el estante interior (C) dentro del gabinete (A).
Ensamblaje (continuación) 3 Cómo instalar los soportes □ Centra un soporte (CC) contra la parte posterior del gabinete (A) a lo largo del borde superior. □ Inserta el tornillo corto (BB) a través del espacio en el soporte (CC), y atornilla en el gabinete (A) con un destornillador. □ Mide la altura del soporte (CC) desde el piso usando una cinta para medir. □ Mide esa misma distancia vertical en la pared donde el gabinete (A) quedará colocado contra ella y marca con un lápiz.
Ensamblaje (continuación) 5 Cómo quitar los cajones (opcional) □ Extiende completamente el cajón. □ Hala los dos pasadores hacia afuera en la parte inferior del cajón para liberar el seguro. □ Simultáneamente, inclina y levanta hacia arriba el cajón para sacarlo el gabinete (A). Mantenimiento Para proteger tus muebles de baño, recome.ndamos . lo siguiente: □ Evita poner tus muebles bajo la luz directa del sol, pues causa decoloración. □ Limpia los derrames al momento.
¿Preguntas, problemas o piezas faltantes? Antes de devolver a la tienda, comunícate con el servicio al cliente de Home Decorators Collection De lunes a viernes, entre 8:00 a.m. y 7:00 p.m. (hora estándar del Este), y los sábados de 9:00 a.m. a 6:00 p.m. (hora estándar del Este) 1-800-986-3460 HOMEDEPOT.COM/HomeDecorators Conserva este manual para uso en el futuro.