MODEL/ MODELE/ MODELO: CFS-300-BLK www.tsicustomerservice.com Distributed by • Distribuido por • Distribué par • Twin-Star International, Inc; Delray Beach, FL 33445 Made in China • Printed in China • Fabricado en China • Impreso en China • Fabriqué en China • Imprimé en Chine Warning: This is an unvented, electric appliance. DO NOT attempt to burn wood or manufactured firelogs in or on this appliance or grate. A214 A222 Advertencia: Este es un aparato eléctrico sin ventilación.
IMPORTANT INSTRUCTIONS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons including the following: 1. Read all instructions before using this appliance. 2. This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.
GETTING STARTED 1. The serial number is located on the back of the Fire Cube, the serial number is necessary for product warranty registration and customer service. Back of the Fire Cube ELECTRIC FIREPLACE MODEL CFS-300-BLK VOLTS 120V ~ SEE OWNERS MANUAL FOR SERVICE DETAILS WARNING: DISCONNECT POWER BEFORE CLEANING OR SERVICING CAUTION: HIGH TEMPERATURE, RISK OF FIRE, KEEP ELECTRICAL CORDS, DRAPERY, FURNISHINGS AND OTHER COMBUSTIBLES AT LEAST 3 FEET(0.
OPERATION INSTRUCTIONS Control Panel Location Control Panel Power Switch Heater Settings Turning on the Power Switch will turn on the flame effect. 0 The Power Switch supplies power to all of the functions of the Fire Cube. The power Switch must be in the ON position to use the heater. Heater off 750W Low heat setting, 750 Watts. 1500W High heat setting, 1500 Watts. A222 5 www.tsicustomerservice.
BULB REPLACEMENT Tools Required for Assembly Clear, 40-watt, E12 socket base light bulb (candelabra base, B bulb). Phillips Head Screwdriver Light bulb 1. Loosen the Phillips head screws and open the back panel. Flame Generator Drive Motor 2. Open the back panel to access light bulb spring clip Light bulb retaining spring Pull Pull rubber grommet 3. Pinch this spring clip to loosen. Gently turn and pull the rubber grommet of the motor shaft. A222 4.
TROUBLESHOOTING GUIDE Problem Root Cause Corrective Action 1. No power. 1. 1. 2. Fire cube does not turn on manually. 2a. No incoming power from the electrical wall socket or switches. 2b. Improper operation. 2c. Defective switch 3. Flames are not moving 3a. Defective Flame Generator Drive 3a. Contact customer service for a replacement Flame Generator Drive Motor Motor. 3b. Unplug the fire cube and remove the back panel and check to see if 3b.
EXPLODED VIEW Part 1 2 3 4 5 6 Part Name Power Switch Heater Switch - 750W/1500W Emberbed Heater/Blower Assembly Flame Generator Drive Motor Flame Generator/Spinner Note, the scale and size of your parts may be different depending on your exact model 2 3 5 1 6 4 A222 8 www.tsicustomerservice.
1-YEAR LIMITED WARRANTY The manufacturer warrants that your new Electric Fire Cube is free from manufacturing and material defects for a period of one year from date of puchase, subject to the following conditions and limitations. 1. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse, accident, or misuse of the product shall nullify this warranty. 2.
INSTRUCCIONES IMPORTANTES Al utilizar aparatos eléctricos, siempre deberán tomarse precauciones básicas para reducir el riesgo de incendio, descarga eléctrica y lesiones a personas. Éstas incluyen: 1. Lea todas las instrucciones antes de usar este aparato. 2. Este aparato se calienta cuando está en uso. Para evitar quemaduras, no permita que la piel sin protección entre en contacto con superficies calientes. Si están incluidas, utilice las manijas para mover este aparato.
PARA EMPEZAR 1. El número de serie se encuentra en la parte posterior del Cubo de Fuego, el número de serie es necesario para el registro de la garantía del producto y servicio de atención al cliente. Parte posterior de la Cubo de Fuego ELECTRIC FIREPLACE MODEL CFS-300-BLK VOLTS 120V ~ Twin-Star International, Inc. www.twinstarhome.
INSTRUCCIONES DE INSTALACIÓN Localización del panel de control Control Principal Interruptor De Encendido El interruptor de encendido suministra energía a todas las funciones del Cubo de Fuego. Encendiendo el interruptor de encendido se enciende el efecto de la llama. Ajustes Ee La Estufa El interruptor de encendido debe estar en la posición ON para usar el calentador. 0 El calentador. 750W Entorno de pocas calorías, 750 Watts. 1500W Entorno de pocas calorías, 750 Watts. A222 12 www.
REEMPLAZO DE LAS BOMBILLA Herramientas requeridas para el ensamblado Destornillador de cabezal Phillips transparentes, 40-watt, socket E12 base de la bombilla de luz (candelabros de base, bombilla B). Motor de accionamiento Bombilla Generador de Llama 1. Afloje los tornillos Phillips y abra el panel posterior. 2. Abra el panel posterior para acceder la bombilla abrazadera de resorte Bombilla muelle de retención Tire Tire arandela de goma 4.
GUÍA PARA SOLUCIÓN DE PROBLEMAS Problema Causa Medidas correctivas 1. Sin energía 1. 1. 2. El Cubo de Fuego no se enciende manualmente. 2a. No hay corriente entrante de la toma de corriente eléctrica o de los interruptores. 2b. Funcionamiento incorrecto 2c. Interruptor defectuoso 2a. Compruebe los interruptores y mueva la unidad a otra toma de corriente. 2b. Pulse manualmente el botón de corriente principal de la parte delantera de la unidad. 2c. Reemplace el interruptor 3.
VISTA DESPLEGADA Pieza 1 2 3 4 5 6 Parte Nombre Interruptor de alimentación Interruptor del Calentador - 750W/1500W Lecho de brasas Conjunto de calentador/ventilador Motor de accionamiento Generador de Llama Rotador/generador de llama Tome en cuenta que la escala y el tamaño de sus partes pueden ser diferentes dependiendo de su modelo exacto 2 3 5 1 6 4 A222 15 www.tsicustomerservice.
GARANTÍA LIMITADA DE 1 AÑO El fabricante garantiza que su nueva Cubo de Fuego eléctrica no presentará defectos de fabricación ni materiales durante un período de un año a partir de la fecha de compra, siempre y cuando se cumplan las siguientes condiciones y limitaciones. 1. Esta Cubo de Fuego eléctrica se debe instalar y operar en todo momento de acuerdo con las instrucciones de instalación y operación proporcionadas con el producto.