Specification

51
Accessories
Most Wall cabinets can be
ordered as “Cabinet Fronts
Only”. Face frame, doors,
hinges and bumpers will be
supplied and shipped loose.
Please consult CFO
availability guide on page
62.
Cabinet Fronts Only (CFO)
Cabinet Fronts Only (CFO)
Most Tall cabinets can be
ordered as "Cabinet Fronts
Only". Face frame, doors,
hinges and bumpers will be
supplied and shipped loose.
Please consult CFO
availability guide on page 62.
Most Base cabinets can be
ordered as “Cabinet Fronts
Only”. Face frame, doors,
drawer fronts, hinges, and
bumpers will be supplied and
shipped loose. In addition,
plastic corner blocks will
be supplied for false front
installation requirements.
Please consult CFO availability
guide on page 62.
Cabinet Fronts Only (CFO)
Matching Wall End Panels
MWEP30
MWEP36
MWEP42
- 3/4" thick
- Field installation
- Panel is for Left or Right application & fits flush against
unfinished cabinet sides
NOTE: Cannot be used in conjunction with Factory
Finished Ends or Custom Depth Cabinets
DESIGN TIP: When using Matching End Panels make
sure not to skin the side of the cabinet with a factory
skin or wall skin
Matching Base End Panel
5
/8"
1
/4"
34
1
/2"
23
7
/8"
*
- 3/4" thick
- Field installation
- Panel is for Left or Right application & fits flush against
unfinished cabinet sides
* BPW, LCB, LCN, LTG & RMG are 2-piece construction
NOTE: Cannot be used in conjunction with Factory
Finished Ends or Custom Depth Cabinets
DESIGN TIP: When using Matching End Panels make
sure not to skin the side of the cabinet with a factory
skin or wall skin
MBEP