Ships in 7-10 Days Fully Assembled Cabinets Soft Close Doors & Drawers Factory Built in the USA Limited Lifetime Warranty SPECIFICATION GUIDE CUSTOM ASSEMBLED CLOSET CABINETRY hdcclosets.
Custom Assembled Closets Limited Lifetime Warranty Home Decorators Collection Closets (warrantor) warrants to the original consumer purchaser only that all products manufactured or supplied by warrantor will be free from defects in material and workmanship under normal use for your lifetime as long as you own the warranted products. (Proof of Purchase is required.) This warranty is only applicable to product used for Residential Purposes and is not transferable to subsequent owners.
Table of Contents Door Styles............................................................................................................. 4 Colors..................................................................................................................... 5 Construction Details............................................................................................... 6 How the System Works..........................................................................................
Door Styles Calabria - 3/4" thick furniture grade particleboard - Low pressure laminate finish Available in both Designer and Architect Series - Edges sealed with color-matched PVC edge banding - Integrated face-mount pull included (factory installed) Firenze - 3/4" thick furniture grade particleboard - Low pressure laminate finish Available in both Designer and Architect Series - Edges sealed with color-matched PVC edge banding - Pulls required (see pages 32-34) Bergamo - 2⅜" wide x 3/4" thick MDF S
Colors Architect Series - features 3D wood grain texture 3D texture Glacier (GL) - 3D wood grain texture - Bright white finish 3D 3D texture texture Platinum (PL) - 3D wood grain texture - Warm gray wood tones 3D texture Beach (BE) Twilight (TW) - 3D wood grain texture - Light tan wood tones - 3D wood grain texture - Dark espresso wood tones Designer Series - features smooth melamine finish Bianco (BO) - Bright white finish Cherry (CH) - Horizontal wood grain design - Deep red cherry finis
Cabinet Construction 1 HANGING RODS 1-3/8" diameter rod in a satin nickel finish. Integrated plastic rod-guard for quiet movement of hangers. Anti-spin lock holds rods in place. Rods have 1¼" of clearance from shelf above. 2 CABINET 3/4" thick furniture grade particleboard sides, top & bottom finished with a durable melamine laminate on both sides. Edgebanded in matching finish. ¼" thick captured MDF back panel in a matching finish.
How the System Works This system features a series of fully assembled wall and base cabinetry components. Base cabinet components stand on the floor and act as a support for wall cabinet components, forming 84" tall towers. Typically, these towers are placed in the center of the wall run and feature drawers, doors, shelves and rollouts. Hanging rod cabinets are then used to fill the remaining wall space, as these types of components are available in a wider variety of size options.
Wall Cabinets 15 in. high Wall - No Door , 30" , 27" , 24" " 1 2 18", 15", 15" 15 in. high Wall - Single Door W151515ND W181515ND W211515ND W241515ND W271515ND W301515ND 21" 18", 15", W151515L/R W181515L/R W211515L/R 15" 15" 15" - No adjustable shelves - Specify: hinged Left or Right - No adjustable shelves 15 in. high Wall - Double Doors 30" 27", 24", 15 in.
Wall Cabinets 30 in. high Wall - Double Doors 24", 30" 27", 30 in. high Wall - Single Door 21" 18", 15", W241530BT W271530BT W301530BT W151530L/R W181530L/R W211530L/R 30" 30" 15" 15" - Two adjustable shelves - Specify: hinged Left or Right - Two adjustable shelves 30 in. high Wall - No Door , 30" , 27" , 24" , 21" " 8 1 15", 30" 42 in.
Wall Cabinets 42 in. high Wall - Shoe Shelves , 30" , 27" , 24" , 21" " 8 1 15", W151542SS W181542SS W211542SS W241542SS W271542SS W301542SS 42" 42 in. high Wall - Single Door 21" 18", 15", 42 in. high Wall - Double Doors - Specify: hinged Left or Right - Three adjustable shelves 42" - Includes 5 adjustable shelves - Space shelves 6.5" apart for shoe storage 15" 15" 42 in.
Wall Cabinets 19 in. high Wall - Single Hanging Rod 36" 15" - 19" W151519HR W15.51519HR W161519HR W16.51519HR W171519HR W17.51519HR W181519HR W18.51519HR W191519 HR W19.51519HR W201519HR W20.51519HR W211519HR W21.51519HR W221519HR W22.51519HR W231519HR W23.51519HR W241519HR W24.51519HR W251519HR W25.51519HR W261519HR W26.51519HR W271519HR W27.51519HR W281519HR W28.51519HR W291519HR W29.51519HR W301519HR W30.51519HR W311519HR W31.51519HR W321519HR W32.51519HR W331519HR W33.51519HR W341519HR W34.
Wall Cabinets 46 in. high Wall - Double Hanging Rod 36" 15" - 46" 15" closet design tip W151546DHR W15.51546DHR W161546DHR W16.51546DHR W171546DHR W17.51546DHR W181546DHR W18.51546DHR W191546DHR W19.51546DHR W201546DHR - W20.51546DHR W211546DHR W21.51546DHR W221546DHR W22.51546DHR W231546DHR W23.51546DHR W241546DHR W24.51546DHR W251546DHR W25.546DHR W261546DHR W26.51546DHR W271546DHR W27.51546DHR W281546DHR W28.51546DHR W291546DHR W29.51546DHR W301546DHR W30.51546DHR W311546DHR W31.
Wall Cabinets 72 in. high Wall Cabinet - Open ",30" ,27 ",24" 8",21 15",1 W151572 W181572 W211572 W241572 W271572 W301572 - Open cabinet allows custom interior configurations using shelf kits (p.26), roll-out shelves (p.26), and closet rods (p.30) - Install at 12" above floor 72" - Attachment rail at top, middle and bottom. Due to weight, cabinets must be securely attached to wall studs in multiple locations per rail.
Wall Cabinets 72 in. high Wall Cabinet - Shoe Shelves " 0 27",3 ,24", W151572SS W181572SS W211572SS W241572SS W271572SS W301572SS " 8",21 15",1 - 72" Install at 12" above floor Position shelves 6.5" apart for shoe storage Ten adjustable shelves Attachment rail at top, middle and bottom. Due to weight, cabinets must be securely attached to wall studs in multiple locations per rail.
Wall Cabinets 72 in. high Wall Cabinet - 5 Slide-Out Shoe Shelves " 30 ,27", ",24" 8",21 15",1 W1515725SO W1815725SO W2115725SO W2415725SO W2715725SO W3015725SO - 72" Install at 12" above floor Attachment rail at top, middle and bottom Five re-locatable slide out shelves Three adjustable shelves 15" closet design tip When designing a closet-for-two; begin by dividing the space in half, and duplicating identical components in both sections to achieve equal storage for both parties.
Wall Cabinets 72 in. high Wall Cabinet - 1 Drawer " 7",30 24",2 ", 8",21 15",1 W1D151572 W1D181572 W1D211572 W1D241572 W1D271572 W1D301572 - Install at 12" above floor - One 7½" drawer front with shallow 4¼" interior drawer box - Five adjustable shelves one fixed center shelf - Attachment rail at top, middle and bottom. Due to weight, cabinets must be securely attached to wall studs in multiple locations per rail.
Wall Cabinets 72 in. high Wall Cabinet - 4 Drawer ,30" ",27" ",24 8",21 15",1 W4D151572 W4D181572 W4D211572 W4D241572 W4D271572 W4D301572 - Install at 12" above floor - Three 7½" drawer fronts with shallow 4¼" interior drawer boxes - Two adjustable shelves and one fixed center shelf - One 15" drawer front with deep 9¼" interior drawer box - Attachment rail at top, middle and bottom. Due to weight, cabinets must be securely attached to wall studs in multiple locations per rail.
Wall Cabinets 72 in. high Wall Cabinet - Hamper 24" W241572HP - Install at 12" above floor - One 30" high tilt-out door with removable wire hamper basket and linen laundry bag - Two adjustable shelves and one fixed center shelf - One 7½" drawer front with shallow 4¼" interior drawer box - Attachment rail at top, middle and bottom. Due to weight, cabinets must be securely attached to wall studs in multiple locations per rail.
42 in. Base Cabinets 42 in. high Base - No Door ",30" 7 ,24",2 ",21" 8 15",1 42 in. high Base - 4 Shelves B151542ND B181542ND B211542ND B241542ND B271542ND B301542ND 42" ",30" 7 ,24",2 ",21" 8 15",1 42" B151542SS B181542SS B211542SS B241542SS B271542SS B301542SS 15" 15" - Two adjustable shelves - Four adjustable shelves - Position shelves 6.5" apart for shoe storage 42 in. high Base 5 Slideout Shelves " 0 ,27",3 ",24" 8",21 15",1 42" 42 in.
42 in. Base Cabinets 42 in. high Base - 5 Drawers " 0 ,27",3 ",24" 8",21 15",1 42 in. high Base Single Door with Drawer 42" B5D151542 B5D181542 B5D211542 B5D241542 B5D271542 B5D301542 ",21" 8 15",1 B151542L/R B181542L/R B211542L/R 42" 15" 15" - Five 7½" drawer fronts with shallow 4¼" interior drawer boxes 42 in.
42 in. Base Cabinets 42 in. high Base Single Hanging Rod ,30" ",27" ,24 ",21" 8 15",1 42 in.
42 in. Base Cabinets with legs 42 in. high Base Single Door with Drawer 42 in. high Base Double Doors with Drawer 18" 15", 30" 24", BS151542L/R BS181542L/R 15" 15" - Specify: hinged Left or Right - One 7½" drawer front with shallow 4¼" interior drawer box - Two adjustable shelves - Four brushed steel legs adjust 4½" to 5" 42 in.
34 in. Base Cabinets with legs 34 in. high Base - No Door 30" 24", 18", , " 5 1 34 in. high Base Single Door BS151534ND BS181534ND BS241534ND BS301534ND 18" 15", BS151534L/R BS181534L/R 30" 30" 15" 15" - Two adjustable shelves - Four brushed steel legs adjust 4½" to 5" 34 in. high Base Double Doors - Specify: hinged Left or Right One 30" high door Two adjustable shelves Four brushed steel legs adjust 4½" to 5" 34 in.
34 in. Base Cabinets with legs 34 in. high Base - 2 Drawers 30" 24", 18", 15", 34 in. high Base - 3 Drawers BS2D151534 BS2D181534 BS2D241534 BS2D301534 30" 24", 18", 15", BS3D151534 BS3D181534 BS3D241534 BS3D301534 30" 30" 15" 15" - Two 15" drawer fronts with deep 9 ¼" interior drawer boxes - Four brushed steel legs adjust 4½" to 5" 34 in.
Countertops 16 in. x 15-84 in. Countertops 4" "-8 15 32 in. x 15-84 in.
Accessories 48 in. x 15 in.
Accessories 15 - 30 in. Wall Adjustable Shelf " - 30 " 5 1 3/4" 14¾" WAS1515 WAS15.515 WAS1615 WAS16.515 WAS1715 WAS17.515 WAS1815 WAS18.515 WAS1915 WAS19.515 WAS2015 WAS20.515 WAS2115 WAS21.515 WAS2215 WAS22.515 WAS2315 WAS23.515 WAS2415 WAS24.515 WAS2515 WAS25.515 WAS2615 WAS26.515 WAS2715 WAS27.515 WAS2815 WAS28.515 WAS2915 WAS29.515 WAS3015 - ¾" furniture grade particle board - Available in ½" increments - Use to create adjustable shelving between two vertical support panels (p.
Accessories 96 in. Light Rail 96 in. Outside Corner Molding ¼" LR96 1½" ¾" OCM96 1" 2¼" 1" ¾" - 96" long - MDF core wrapped with matching laminate - Includes under-mount installation tab * Not available in Architect Series or Almond finish - 96" long - MDF core wrapped with matching laminate * Not available in Architect Series or Almond finish 96 in. Inside Corner Molding ICM96 ¾" 96 in.
Accessories 15 in. Deep Support Panel 6 in. Filler Strips TCP1546 TCP1572 TCP1584 FS0630 FS0642 FS0684 30" 46" 72" 84" 42" 84" 15" 6" - 32mm (1¼") system drilled - Must be installed against a cabinet or a wall - Use as vertical supports for Wall Adjustable Shelving (p.27) - Trim to size 48 in. x 48 in.
Accessories Jewelry Tray Insert 15 - 30 in. Closet Rods JTI24 JTI30 - - Available in ½" increments - Use to provide hanging between two cabinets or a cabinet and a wall (requires CRIR p.26 or TCP p.29) - Brackets included - Use interior cabinet width to determine closet rod length Available in 24" and 30" 8 compartments Soft black velvet covering Fits inside shallow-depth drawers Hanging File Frame HFF18 HFF24 TCR15 TCR15.5 TCR16 TCR16.5 TCR17 TCR17.5 TCR18 TCR18.5 TCR19 TCR19.5 TCR20 TCR20.
Accessories satin nickel finish 48 in.
Decorative Hardware - Brushed steel - Euro railing pull - Brushed nickel - Brushed nickel - Features dual mounting hole options DH45-100 - 7" Euro Pull DH44-346 - 8" Square Bar Pull DH116-120 - 10" Quadra Pull 3¾" center (96mm) 7½" center (196mm) 5" inside center (128mm) 8-13/16" outside center (224mm) DH45-102 - 10" Euro Pull* 6-15/16" center (176mm) DH45-104 - 13" Euro Pull* DH44-348 - 9" Square Bar Pull 8-13/16" center (224mm) DH116-122 - 11" Quadra Pull DH44-350 - 13" Square Bar Pull* 6-5
Decorative Hardware DH43-826 DH43-630 - Elongated oval knob - Antique pewter - 2" length - Elongated oval knob - Oiled bronze - 2" length DH43-828 DH43-632 - Classic pull Antique pewter 3-3/4" center (96mm) 4-3/4" outside length - DH43-824 - 1" Backplate for DH43-828 - Antique pewter - 3¾" center (96mm) - 5¼" outside length Screw-head cup pull Antique pewter 2-1/2" center (64mm) 4-1/8" outside length DH99-188 - Round knob - Brushed nickel - 1-1/4" diameter DH99-128 - Contemporary bow pull Bru
Decorative Hardware DH65-432 DH65-200 - Birdcage knob - Stainless steel - 2-1/2" length - Birdcage knob - Antique iron - 2-1/2" length - Arrowhead knob - Antique pewter - 3-1/2" length DH65-120 DH65-402 - DH88-104 Birdcage pull Stainless steel 3-3/4" center (96mm) 4" outside length - DH95-144 Birdcage pull Antique iron 3-3/4" center (96mm) 4" outside length DH87-102 DH88-110 - Arrowhead pull Antique pewter 5" center (128mm) 7-1/2" outside length HDWE TEMPLATE-TC Hardware Drilling Template
Notes 35
hdcclosets.
