Installation Guide
Hanging wall
cabinet
installation
Tall, medium and short Hanging cabinets with rods and the double hanging cabinet with 2 rods are wall cabinets that
attach only to the wall and do not have a base cabinet located below them for attachment. These cabinets are hung at
the same hieght as the 42" wall cabinets or 72" wall cabinets in your conguration.
1. Mark a line at the same height as the 42" wall cabinets in your conguration. This will be approximately 84" off the
oor. If your conguration involves 72" wall cabinets make your line at the 84" height mark which will be the same
for the 72" wall cabinets.
2. On the wall, locate the studs and mark the center of each stud approximately 3" from the top of the line drawn in
step 1.
3. Measure the distance from the outer edge of the Hanging wall cabinet to the center of the studs you plan to
attach to.
4. Transfer this measurement to the horizontal installation rail along the back of the cabinet.
5. Drill (4) mounting holes thru each installation rail where the studs marks are with a 3/32" drill bit.
NOTE: If you can only hit one stud, use a drywall toggle bolt to create a second attachment point (consult your
local hardware store for the correct toggle for your wall construction. HANGING CABINETS MUST HAVE TWO
ATTACHMENT POINTS!
6. Attach the wall cabinet thru the drywall and into the wood studs using #10 x 3" pan head screws or install drywall
toggle bolts if necessary.
STEP 1-2 STEP 4-5 STEP 6
15" - 36"
19"
15"
15" - 36"
46"
15"
15" - 36"
34"
15"
15" - 36"
46"
15"