Warranty

36
6 in. Filler Strips
- Trim to size
FS0630
FS0642
FS0684
30"
42"
84"
6"
15 in. Deep Support Panel
- 32mm (1¼") system drilled
- Must be installed against a cabinet
or a wall
- Use as vertical supports for Wall
Adjustable Shelving (p.30)
46"
72"
84"
15"
48 in. x 48 in. Decorative Panel
48"
48"
1/4"
- ¼" thick laminated MDF
- Use to cover the exposed unfinished
backs of base cabinets in islands
- Field cut to desired size
PL4848
TCP1546
TCP1572
TCP1584
When adding the Slide-Out Belt Rack (SOBR-SN)
accessory to your design, be sure to locate it on the
outside of a cabinet box where it can be installed 54"
above the  oor.
The Slide-Out Tie Rack (SOTR-SN) accessory may
be located on the outside OR the inside of a standard
hanging cabinet and still function properly.
Accessories
closet
design tip