Instructions / Assembly

10
Mounting the fan-motor assembly
(standard mount)
□ Align the locking slots of the canopy with two screws (KK)
in the mounting bracket (A). Push up to engage the slots and
turn clockwise to lock in place.
□ Firmly tighten the two screws (KK).
□ Install the decorative bottom cover (D) by aligning the cover’s
slots with the screws in the bottom of the canopy (C). Rotate
the bottom cover clockwise to lock in place.
WARNING: When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the mounting bracket must rest in
the groove of the hanger ball. Failure to properly seat the tab in
the groove could cause damage to the wiring.
Assembly - Hanging the Fan (continued)
7
Wrapping the extra wire
□ Gently wrap the excess wire around the mounting bracket.
□ Secure with electrical tape.
6
NOTE : Follow this step ONLY if you did not cut the extra length off
from the wires coming from the ceiling fan.