Instructions / Assembly
16
Operation (continued)
Then close the door.
Figure 1
Figure 3
Figure 4
(Figure 4)
Disconnect the Propane Cylinder
Fix the Propane Cylinder
Connect the Propane Cylinder
Figure 2
The knob on the LP cylinder muct be closed.
Make sure that the knob is turned clockwise to a full stop.
The cylinder supply system must be arranged for vapor withdrawal.
Check that the control knob on the control unit is turned off.
Hold the regulator in one hand and insert the nipple into the valve outlet.
Be sure the nipple is centered in the valve outlet.
The coupling nut connects to the large outside threads on the valve outlet.
Hand-tighten the coupling nut clockwise until it comes to a full stop. (Figure 1)
Firmly tighten by hand only.
Fully close the cylinder valve by turning clockwise.
Turn the coupling nut counterclockwise until the regulator assembly
detaches. (Figure 2)
A dented, rusted or damaged propane cylinder may be hazardous and should be
checked by your cylider supplier.
Never use a propane cylinder with a damaged valve connection.
The cylinder must have a listed overlling prevention device.
The cylinder must have a connection device compatible with the connection for
the appliance.
The cylinder used must include a collar to protect the cylinder valve.
As shown in gure, x the gas cylinder in place by tightening the buttery bolt.
(Figure 3)
Never connect an unregulated propane cylinder to the heater.
The propane cylinder must be constructed and marked in accordance with the
specications for LP gas cylinders of the U.S. Department of Transportation (DOT).
Screw regulator onto gas hose.
Do not cross-thread.
Tighten securely.
Attach regulator to cylinder.
Complete attachment.
Install Cylinder
Do not store a spare propane gas cylinder under or near this appliance.
in use. Only install the type of dust cap on the cylinder valve that is provided with
the cylinder valve. Other type of caps or plugs may result in leakage or propane.
Never fill the cylinder beyond 80 percent full.
Place the dust cap on the cylinder valve outlet whenever they cylinder is not