Instructions / Assembly

19
Operation (continued)
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
NOTE: Improper operation can cause injury or property damage. If burner fails to remain lit, all valves
should be closed and a waiting period of at least 5 minutes should pass before attempting to light.
NOTE: The burner may be noisy when initially turned on.
DANGER:
CAUTION: Avoid inhaling fumes emitted from the heater’s rst use. Smoke and odor from the
burning of oils used in manufacturing will appear. Both smoke and odor will dissipate after
approximately 30 minutes. The heater should NOT produce thick black smoke.
Turn on the valve on the gas cylinder.
Press and turn the control knob to HIGH (maximum) position (counter-clockwise 90°). (Figure 1)
If the burner ame goes out, turn off the heater and wait at least 5 minutes or more to let the gas
Holding down the control knob, press the igniter button several times until the main ame is ignited.
Turn the control knob to LOW (minimum) and leave it there for 5 minutes or more before turning the
Release the control knob 10 seconds after the ignition.
knob to the desired temperature setting. (Figure 2)
dissipate before re-lighting to avoid gas explosion.
Repeat steps 2 to 4.
Lighting:
Turn the knob to the level of heat desired.
If you experience any ignition problem please consult “Troubleshooting” on page 24.
Normal Abnormal