Item: 1002 433 712 Model: HB15016-310D Item: 1002 433 689 Model: HB15016-310 USE AND CARE GUIDE ____________________________________ INCANDESCENT WALL FIXTURE KENTON Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday 9 a.m. – 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.
Table of Contents Table of Contents Safety Information Warranty Pre-Installation Planning the Installation Tools Required Hardware Included Package Contents 2 2 2 3 3 3 3 4 Installation Operation Care and Cleaning Exterior Maintenance Interior Maintenance Troubleshooting 5 7 7 7 7 7 Safety Information Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Pre-Installation PLANNING THE INSTALLATION Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for Proof of Purchase.
Pre-Installation (continued) PACKAGE CONTENTS A Part Description Quantity A Fixture Body 1 4
Installation 1 Mounting the hardware Thread the fixture screws (EE) into the provided holes of the mounting bracket (GG). Thread the hex nuts (BB) onto the fixture screws (EE). Do not tighten the hex nuts (BB) at this time. Pull the supply wires out from the outlet box and mount the mounting bracket (GG) to the outlet box using the mounting screws (DD). Place the fixture body (A) over the outlet box and onto the fixture screws (EE).
Installation (continued) 3 Mounting the fixture Place the fixture body (A) onto the fixture screws (EE). A Secure the fixture body (A) into place by using the decorative nuts (AA). AA EE 4 Installing the bulb NOTE: Replacement bulbs should not exceed a 60 watt incandescent light bulb or 13 watt SBCFL. FF Screw the bulb (FF) into the socket on the fixture body (A).
Operation Turn on power at the circuit breaker or fuse box. Turn the light switch on to activate the fixture. Care and Cleaning EXTERIOR MAINTENANCE NOTE: If you have electrical questions consult your local electrical code for approved grounding methods. Use a dry or slightly dampened clean cloth and wipe the surface of the fixture INTERIOR MAINTENANCE Disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday 9 a.m. – 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM Retain this manual for future use.
Artículo:1002 433 712 Modelo: HB15016-310D Artículo: 1002 433 689 Modelo: HB15016-310 GUÍA DE USO Y MANTENIMIENTO ____________________________________ LUMINARIO DE PARED INCANDESCENTE KENTON Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection 8 a.m. – 7 p.m., Hora del Este, Lunes – Viernes 9 a.m. – 6 p.m., Hora del Este, Sábado 1-800-986-3460 www.homedepot.
Tabla de Contenidos Tabla de Contenidos Información de Seguridad Garantía Pre-Instalación Planificación de la Instalación Herramienta Necesarias Ferretería Incluida Contenido del Paquete 10 10 10 11 11 11 11 12 Instalación Operación Cuidado y Limpieza Mantenimiento del Exterior Mantenimiento del Interior Solución de Problemas 13 15 15 15 15 15 Información de Seguridad Antes de iniciar la instalación de este aparato o la eliminación de un accesorio anterior, desconecte la alimentación apagando el disy
Pre-Instalación PLANIFICACIÓN DE LA INSTALACIÓN Lea todas las instrucciones antes del montaje e instalación. Antes de comenzar la instalación de la luminaria o el retiro de un artefacto anterior, desconecte la alimentación apagando el disyuntor o quitando el fusible en la caja de fusibles. Para evitar daños a este producto, montarlo en una superficie suave y no abrasiva, como una alfombra o cartón. NOTA: Guarde su recibo y estas instrucciones para comprobante de compra.
Pre-Instalación (continuado) CONTENIDO DEL PAQUETE A Parte A Descripción Cantidad Cuerpo Principal 1 12
Instalación 1 Montando la ferretería Enrosque los tornillos del luminario (EE) en los agujeros provistos en la ménsula de montaje (GG). EE Enrosque las tuercas hexagonales (BB) en los tornillos del luminario (EE). No apriete las tuercas hexagonales (BB) en este momento. Saque los cables de alimentación de la caja de distribución y monte la ménsula de montaje (GG) sobre la caja de distribución utilizando los tornillos de la ménsula (DD).
Instalación (continuado) 3 Montando el luminario Coloque la placa del curepo principal (A) sobre los tornillos del luminario (EE) . A Asegúre el cuerpo principal (A) con las tuercas decorativa (AA) que se incluyen. AA EE 4 Instalando la bombilla NOTA: Lámparas de reemplazo no deben exceder una bombilla incandescente de 60 vatios o un SBCFL de 13 vatios. FF Enrosque la bombilla (FF) en el zócalo del cuerpo principal (A).
Operación Conecte la alimentación en el disyuntor o caja de fusibles. Gire el interruptor de la luz para activar el aparato. Cuidado y Limpieza MANTENIMIENTO DEL EXTERIOR NOTA: No use limpiadores con químicos, solventes o abrasivos fuertes. Use sólo un paño seco para sacudir o limpiar con cuidado. Use un paño limpio y seco o ligeramente humedecido y limpie la superficie de la linterna.
Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection 8 a.m. – 7 p.m., Hora del Este, Lunes – Viernes 9 a.m. – 6 p.m., Hora del Este, Sábado 1-800-986-3460 www.homedepot.com/homedecorators Conserve este manual para futuras consultas.
Article: 1002 433 689 Modèle: HB2572-303 Article: 1002 433 712 Modèle: HB15016-310D GUIDE D'UTILISATION ET D'ENTRETIEN ____________________________________ LANTERNE MURALE INCANDESCENT KENTON Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Home Decorators Collection Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi 9:00 – 18:00, HNE, Samedi 1-800-986-3460 HOMEDEPOT.
Table des Matières Table des Matières Consignes de Sécurité Garantie Pré-Installation Planification du l’Installation Outils Requis Matériel Inclus Contenu du Paquet 18 18 18 19 19 19 19 20 Installation Opération Entretien et Nettoyage Entretien Extérieur Entretien Intérieur Dépannage 21 23 23 23 23 23 Consignes de Sécurité Avant de commencer l'installation de ce luminaire ou à la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la
Pré-Installation PLANIFICATION DE L'INSTALLATION Lire toutes les instructions avant assemblage et l'installation. Avant de commencer l'installation du luminaire ou la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la platine de fusibles. Pour éviter d'endommager le produit, assembler sur un doux et non abrasif surface tels que tapis ou un morceau de carton. NOTE: Conservez votre reçu et ces instructions à la preuve d'achat.
Pré-Installation (continue) CONTENU DU PAQUET A Partie A Description Quantité Corps du Luminaire 1 20
Installation 1 Le montage du matériel Visser les vis du luminaire (EE) dans les trous prévus sur la plaque de fixation (GG). Visser les écrous hexagonaux (BB) sur les vis du luminaire (EE). Ne pas serrer les écrous hexagonaux (BB) pour l’instant. EE Tirer les fils d’alimentation hors de la boîte de sortie et installer la plaque de fixation (GG) sur la boîte de sortie à l’aide des vis de montage (DD).
Installation (suite) 3 Le montage de la lanterne Placer la plaque arrière du le corps du luminaire (A) sur les vis du luminaire (EE). A Fixer le corps du luminaire (A) en place à l'aide des écrous décoratif (AA) fournies. AA EE 4 Installation de l'ampoule NOTE: Ampoules de rechange ne doivent pas dépasser une ampoule à incandescence de 60 watts ou une lampe fluocompacté à ballast intégré de 13 watts. FF Visser l’ampoule (FF) dans la douille sur le corps du luminaire (A).
Opération Mettez sous tension au niveau du disjoncteur ou des fusibles. Allumez l'interrupteur pour activer l'appareil. Entretien et Nettoyage ENTRETIEN EXTÉRIEUR NOTE: N’utilisez aucun produit de nettoyage contentant des agents chimiques, des solvants ou des abrasifs durs. Utilisez uniquement un linge doux et sec pour enlever la poussière en essuyant délicatement Utilisez un linge sec ou légèrement humide et essuyez le luminaire.
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Home Decorators Collection Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi 9:00 – 18:00, HNE, Samedi 1-800-986-3460 HOMEDEPOT.COM Conserver ce manuel pour un utilisation ultérieure.