Item: Xxx Model: HB3532-35 USE AND CARE GUIDE ____________________________________ MINI PENDANT LIGHT Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday 9 a.m. – 6 p.m., EST, Saturday 1-800-986-3460 www.homedepot.com/homedecorators THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this pendant light.
Table of Contents Table of Contents Safety Information Warranty Pre-Installation Planning the Installation Tools Hardware Package Contents 2 2 2 3 3 3 3 4 Installation Operation Care and Cleaning Exterior Maintenance Interior Maintenance Troubleshooting 5 7 7 7 7 7 Safety Information Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Pre-Installation PLANNING THE INSTALLATION Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for Proof of Purchase.
Pre-Installation (continued) PACKAGE CONTENTS A B C D Part Description Quantity A Canopy 1 B Tube 6 C Main Fixture Body 1 D Glass Shade 1 4
Installation 1 Attaching the mounting bracket Thread the fixture screws (DD) into the provided holes of the mounting bracket (FF). Pull the supply wires out from the outlet box and mount the mounting bracket (FF) to the outlet box using the bracket mounting screws (CC). Place the canopy (A) over the outlet box and onto the fixture screws (DD). Adjust the fixture screws (DD) until they protrude out from the canopy (A) 1/4 in. 2 FF CC DD Remove the canopy (A).
Installation (continued) 3 Connecting the wires NOTE: If you have electrical questions consult your local electrical code for approved grounding methods. FF Connect the black supply wire to the smooth fixture wire using a wire nut (BB). Connect the white supply wire to the ribbed fixture wire using a wire nut (BB). Connect the supply ground wire to the ground screw located on the mounting bracket (FF). Wrap all wire connections with electrical tape for a more secure connection.
Operation Turn on power at the circuit breaker or fuse box. Turn the light switch on to activate the fixture. Care and Cleaning EXTERIOR MAINTENANCE NOTE: Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully. Use a dry or slightly dampened clean cloth and wipe the surface of the fixture. INTERIOR MAINTENANCE Disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday 9 a.m. – 6 p.m., EST, Saturday 1-800-986-3460 www.homedepot.com/homedecorators Retain this manual for future use.
Artículo: xxx Modelo: HB3532-35 GUÍA DE USO Y MANTENIMIENTO ____________________________________ MINI COLGANTE Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection 8 a.m. – 7 p.m., Hora del Este, Lunes – Viernes 9 a.m. – 6 p.m., Hora del Este, Sábado 1-800-986-3460 www.homedepot.com/homedecorators GRACIAS Le agradecemos la confianza que han depositado en Hampton Bay a través de la compra de esta araña de luces.
Tabla de Contenidos Tabla de Contenidos Información de Seguridad Garantía Pre-Instalación Planificación de la Instalación Herramienta Ferretería Contenido del Paquete 10 10 10 11 11 11 11 12 Instalación Operación Cuidado y Limpieza Mantenimiento Exterior Mantenimiento Interior Solución de Problemas 13 15 15 15 15 15 Información de Seguridad Antes de iniciar la instalación de este aparato o la eliminación de un accesorio anterior, desconecte la alimentación apagando el disyuntor o quitando el fusible
Pre-Instalación PLANIFICACIÓN DE LA INSTALACIÓN Lea todas las instrucciones antes del montaje e instalación. Antes de comenzar la instalación de la luminaria o el retiro de un artefacto anterior, desconecte la alimentación apagando el disyuntor o quitando el fusible en la caja de fusibles. Para evitar daños a este producto, montarlo en una superficie suave y no abrasiva, como una alfombra o cartón. NOTA: Guarde su recibo y estas instrucciones para comprobante de compra.
Pre-Instalación (continuado) CONTENIDO DEL PAQUETE A B C D Parte Descripción Cantidad A Cubierta 1 B Tubos 6 C Cuerpo Principal 1 D Pantalla de Vidrio 1 12
Instalación 1 Sujetando la ménsula de montaje Enrosque los tornillos del luminario (DD) en los agujeros provistos en la ménsula de montaje (FF). Saque los cables de alimentación de la caja de distribución y monte la ménsula de montaje (FF) sobre la caja de distribución utilizando los tornillos de montaje (CC). Coloque la cubierta (A) sobre la caja de distribución y en los tornillos del luminario (DD).
Instalación (continuado) 3 Conectando los cables NOTA: Si tiene dudas con las conexiones eléctricas, consulte el código eléctrico de su localidad para los métodos aprobados para las conexiones a tierra. Conecte el cable negro de alimentación con el cable liso usando un empalme (BB). Conecte el cable blanco de alimentación con el cable acanalado usando u empalme (BB). 4 FF BB Conecte el cable de tierra de alimentación al tornillo de tierra ubicado en la ménsula de montaje (FF).
Operación Conecte la alimentación en el disyuntor o caja de fusibles. Gire el interruptor de la luz para activar el aparato. Cuidado y Limpieza MANTENIMIENTO DEL EXTERIOR NOTA: No use limpiadores con químicos, solventes o abrasivos fuertes. Use sólo un paño seco para sacudir o limpiar con cuidado. Use un paño limpio y seco o ligeramente humedecido y limpie la superficie de la linterna.
Preguntas, problemas, o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection 8 a.m. – 7 p.m., Hora del Este, Lunes – Viernes 9 a.m. – 6 p.m., Hora del Este, Sábado 1-800-986-3460 www.homedepot.com/homedecorators Conserve este manual para futuras consultas.
Article: XXX Modèle: HB3532-35 GUIDE D'UTILISATION ET D'ENTRETIEN ____________________________________ MINI SUSPENSION Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Home Decorators Collection Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi 9:00 – 18:00, HNE, Samedi 1-800-986-3460 www.homedepot.com/homedecorators MERCI Nous apprécions la confiance que vous avez placée dans Hampton Bay grâce à l'achat de cette lustre.
Table des Matières Table des Matières Consignes de Sécurité Garantie Pré-Installation Planification du l’Installation Outils Matériel Contenu du Paquet 18 18 18 19 19 19 19 20 Installation Opération Entretien et Nettoyage Entretien Extérieur Entretien Intérieur Dépannage 21 23 23 23 23 23 Consignes de Sécurité Avant de commencer l'installation de ce luminaire ou à la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la platine de fus
Pré-Installation PLANIFICATION DE L'INSTALLATION Lire toutes les instructions avant assemblage et l'installation. Avant de commencer l'installation du luminaire ou la dépose d'un précédent luminaire, débrancher l'alimentation en désactivant le disjoncteur ou en retirant le fusible de la platine de fusibles. Pour éviter d'endommager le produit, assembler sur un doux et non abrasif surface tels que tapis ou un morceau de carton. NOTE: Conservez votre reçu et ces instructions à la preuve d'achat.
Pré-Installation (continue) CONTENU DU PAQUET A B C D Partie Description Quantité A Pavillon 1 B Tube 6 C Corps du Luminaire 1 D Abat-jour en Verre 1 20
Installation 1 Le montage du plaque de fixation Vissez les vis du luminaire (DD) dans les trous prévus sur la plaque de fixation (FF). Tirez les fils d’alimentation hors de la boîte de sortie et installez la plaque de fixation (FF) sur la boîte de sortie à l’aide des vis de montage (CC). Placer el pavillon (A) au-dessus de la boîte de sortie, en veillant à faire passer les vis du luminaire (DD).
Installation (continue) 3 La connexion des fils NOTE: Si vous avez des questions concernant l’installation électrique, veuillez consulter le code de l’électricité en vigueur dans votre province pour connaître les méthodes de mise à la terre approuvées. Reliez le fil d’alimentation noir au fil noir du luminaire à l’aide d’un capuchon de connexion (BB). Reliez le fil d’alimentation blanc au fil blanc du luminaire à l’aide d’un capuchon de connexion (BB).
Opération Mettez sous tension au niveau du disjoncteur ou des fusibles. Allumez l'interrupteur pour activer l'appareil. Entretien et Nettoyage ENTRETIEN EXTÉRIEUR NOTE: N’utilisez aucun produit de nettoyage contentant des agents chimiques, des solvants ou des abrasifs durs. Utilisez uniquement un linge doux et sec pour enlever la poussière en essuyant délicatement Utilisez un linge sec ou légèrement humide et essuyez le luminaire.
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, appeler Home Decorators Collection Service à la clientèle 8:00 – 19:00, HNE, Lundi – Vendredi 9:00 – 18:00, HNE, Samedi 1-800-986-3460 www.homedepot.com/homedecorators Conserver ce manuel pour un utilisation ultérieure.