Instructions / Assembly

5 HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Installation

Attaching the mounting unit to the

junction box

 Remove the pre-installed cap nuts from the mounting

unit (AA) and put them in a safe location. Attach the

mounting unit (AA) to the junction box (not included) with

the mounting screws (BB).

NOTE: The pre-installed support screws on the mounting

unit (AA) should protrude outaway from the junction box.

Making the electrical connections

 Connect the copper wire from the light xture (A) to the

mounting unit (AA) by securing it with the pre-installed

ground screw.

 Connect the black to black (power), the white to white

(neutral) and copper wire to ground wire with the wire

nuts(CC) and secure them with electrical tape (not

included).

NOTE: If the wires from the xture are the same color,

attach the side with markings or letters to the black

(positive) wire and the other to the white (neutral) wire.

Assembling the light xture

□ Screw the nials (C) into the light xture (A).

Securing the light xture

 Secure the light xture (A) to the junction box by placing

it over the pre-installed support screws on the mounting

unit (AA) and securing it with the cap nuts from step 1.

 Designed for mounting light xture (A) up or down.