Item # 1008 547 470 Model # HD0547G USE AND CARE GUIDE 1-LIGHT OUTDOOR PENDANT Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this pendant.
Table of Contents Table of Contents ........................................................... 2 Safety Information ......................................................... 2 Warranty ......................................................................... 2 Five (5) Year Warranty ............................................................. 2 What is Covered ....................................................................... 2 What is Not Covered .....................................................
Pre-Installation PLANNING INSTALLATION □ Read all instructions before installing. □ To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard. IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-800-986-3460.
Pre-Installation (continued) PACKAGE CONTENTS A Part Description Quantity A Fixture body 1 NOTE: A new Tiffany lamp shade has an oil film applied to the shade that protects the Tiffany shade from scratches during shipment. If the oil applied is too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil. For general cleaning of Tiffany shades, use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
Installation 1 Installing the crossbar assembly □ Secure the crossbar assembly (AA) to the outlet box (not included) with the outlet box screws (BB). Tighten until snug. NOTE: The preassembled mounting threaded tube on the crossbar should protrude outward. Outlet box AA BB 2 □ □ □ Testing ceiling canopy fit to the crossbar assembly Remove the pre-assembled canopy lock ring from the crossbar assembly (AA).
Installation (continued) 3 Installing the fixture chain □ □ □ □ Choose desired hanging length for the light fixture. Suggested mounting height over a table or island is 30 inches from the table/island top to the bottom of the fixture. Adjust the fixture chain (FF) to the desired length, removing links if needed. Connect one end of the fixture chain (FF) to the canopy chain loop preassembled to the crossbar assembly (AA) with one quick link (DD) and close the quick link (DD).
Installation (continued) 5 Trimming excess fixture wire □ □ □ □ □ □ 6 Supply wire and ground wire Unthread the canopy lock ring. Slide the canopy lock ring and the ceiling canopy (EE) down the quick link (DD). Push all slack fixture wire through canopy chain loop and into the outlet box. Trim excess fixture wire leaving a minimum of 6 inches hanging out of the outlet box. Separate the smooth side and ribbed side of the supply wire to about 3 inches from the end.
Installation (continued) 7 Installing the ceiling canopy □ □ Attach the ceiling canopy (EE) back over the canopy chain loop. Secure with the canopy lock ring. Canopy chain loop EE Canopy lock ring 8 Installing the light bulb □ Install the correct bulb (not included) referring to fixture markings and/or labels for maximum wattage. NOTE: Uses one 100W maximum medium base (E26) type "A" or 16W maximum medium base (E26) self-ballasted LED bulb (sold separately).
Care and Cleaning □ Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully. □ To clean the fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture. Troubleshooting Problem Possible Cause Solution The light(s) will not turn on. The bulb is burned out. The power is off. There is a faulty switch.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
Articulo # 1008 547 470 Modelo # HD0547G GUÍA DE USO Y MANTENIMIENTO LÁMPARA COLGANTE EXTERIOR CON 1 BOMBILLA ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS GRACIAS POR TU COMPRA.
ÍNDICE Índice............................................................................... 2 Información de seguridad.............................................. 2 Garantía........................................................................... 2 Cinco (5) años de garantía........................................................... 2 La garantía cubre......................................................................... 2 Lo que no cubre la garantía..................................................
Antes de la instalación Planificación de la instalación □ Lea todas las instrucciones antes de realizar la instalación. □ Coloque este producto sobre una superficie suave y no abrasiva, como una alfombra o una base de cartón, para evitar dañarlo. IMPORTANTE : Revisa que el aislamiento de los cables no haya sufrido ningún corte, abrasión ni tenga filamentos de cobre expuestos debidos al envío. Si hay un defecto en el cable suspende el ensamblaje.
Antes de la instalación (continuación) CONTENIDO DEL PAQUETE A Pieza A Descripción Cantidad Cuerpo de la lámpara 1 NOTA: Una pantalla de lámpara tiffany nueva tiene una película de aceite aplicada a la pantalla que protege la pantalla tiffany de arañazos durante el envío. Si el aceite aplicado es demasiado denso, puede eliminar el exceso de película de aceite con papel absorbente. Limpie suavemente el exceso de aceite.
Instalación 1 Instalación del Ensamble de la barra transversal □ Fije la barra transversal (AA) a la caja de salida (no incluida) con los tornillos para la caja de salida (BB). Apriete hasta que esté ajustado. Nota: Los manguitos roscados de montaje preensamblados en la barra transversal deben sobresalir.
Instalación (continuación) 3 Instalación del Cadena de la lámpara □ □ □ □ Escoja el largo deseado del soporte para la lámpara. La altura sugerida para colgar el producto sobre una mesa o isla es 76,2 cm desde la parte superior de la mesa o isla hasta la parte inferior de la lámpara. Ajuste la cadena de la lámpara (FF) al largo deseado, retirando eslabones si es necesario.
Instalación (continuación) 5 Corte el exceso de cable de la lámpara □ □ □ □ □ □ 6 Conductor de suministro y conductor de tierra Desenrosque el anillo de bloqueo de la cubierta. Deslice el anillo de bloqueo de la cubierta y la cubierta para techo (EE) por el eslabón de conexión rápida (DD). Empuje todos los cables flojos de la lámpara a través del enganche de la cadena de la cubierta hacia el interior de la caja de salida.
Instalación (continuación) 7 Instalación del Cubierta para techo □ □ Enganche de la cadena de la cubierta Vuelva a fijar la cubierta del techo (EE) en el enganche de la cadena. Asegure con el anillo de bloqueo de la cubierta. EE 8 □ Anillo de bloqueo de la cubierta Instalación de la bombilla Instale las bombilla (no incluidas) correctas consultando las marcas o las etiquetas en la lámpara para conocer el vataje máximo.
Cuidado y limpieza □ No use limpiadores que contengan agentes químicos, solventes o abrasivos fuertes. Use solo un paño suave y seco para desempolvar o limpiar cuidadosamente el producto. □ Para limpiar la lámpara, desconecte la alimentación apagando el interruptor de circuito o retirando el fusible de la caja de fusibles y use un paño limpio seco o levemente húmedo para la superficie exterior de la lámpara.
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Conserva este manual para referencias futuras.