Use and Care Manual

ManualsBrandsHome Decorators Collection ManualsElectric FireplacesCaufield 54 in. Media Console Infrared Electric Fireplace in Honey Ash

THANK YOU

We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this electric fireplace/heater. We

strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Home Decorators Collection!

Model #WH100-23I2D-R

WH100-26I2D-R

USE AND CARE GUIDE

COMBINATION ELECTRIC FIREPLACE/HEATER

Covered by one or more of the following US Patents: 10,451,235 / 10,371,333 / 10,520,149 / 10,731,810.

Additional US and International Patents Pending.

Questions, problems, missing parts? Before returning to the store,

call Home Decorators Collection Customer Service

8 a.m. - 7 p.m., EST, Monday-Friday

9 a.m. – 6 p.m., EST, Saturday

1-800-986-3460

HOMEDEPOT.COM/HOMEDECORATORS

HEATER DEFAULT SETTING:

The default factory setting for your thermostat is 82 degrees. If your room temperature is already 82 degrees

or above, then your heater will shut OFF after about 3 minutes. See thermostat directions for how to adjust

the temperature settings in order to keep your heater ON until your desired room temperature is reached.

Summary of content (12 pages)

PAGE 1
Model #WH100-23I2D-R WH100-26I2D-R USE AND CARE GUIDE COMBINATION ELECTRIC FIREPLACE/HEATER Covered by one or more of the following US Patents: 10,451,235 / 10,371,333 / 10,520,149 / 10,731,810. Additional US and International Patents Pending. HEATER DEFAULT SETTING: The default factory setting for your thermostat is 82 degrees. If your room temperature is already 82 degrees or above, then your heater will shut OFF after about 3 minutes.
PAGE 2
Table of Contents Package Contents ....................................................................4 Operation ......................................................................... 5 Using the Remote Control .................................................. 7 Care and Maintenance ...................................................... 9 Troubleshooting .............................................................. 10 Table of Contents ..............................................................
PAGE 3
Safety Information (continued) GROUNDING INSTRUCTIONS DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product. If it will not fit the outlet, have a proper outlet installed by qualified electrician. This product must be grounded.
PAGE 4
Pre-Operation ELECTRICAL SPECIFICATIONS □ □ Voltage: 120 V AC, 60 Hz Watts: 1500 Watts PACKAGE CONTENTS A B Part Description Quantity A Fireplace 1 B Remote control 1 4
PAGE 5
Operation 1 2 Identifying the control panel □ □ □ The control panel is located on the top left corner of the fireplace/heater unit. The control panel contains the display unit (1), function indicator (2), timer function (3), heater control (4), flames control (5), and main power (6). The display unit (1) displays information about the flame level, timer, and current temperature.
PAGE 6
Operation (continued) 4 Using the heater control NOTE: The heater default temperature is set to 82 degrees Fahrenheit. If your ambient room temperature is above 82 degrees, then your heater will automatically shut off after few minutes. Adjust your heater thermostat (see below) to a higher temperature in order to keep your heater ON above 82 degrees. □ □ □ □ □ □ 5 Pressing the heater button (4) will turn on or off the heat and set the temperature in the thermostat.
PAGE 7
Operation (continued) □ To unlock the flame function, press and hold the flame button (5) for five seconds. The log lights flash several times and then both flame lights and log lights turn on. 1 5 6 Using the main power button □ Press the power button (6) to turn the fireplace/heater unit on and off. Press the power button (6) once to turn the unit on. Press again to turn the unit off.
PAGE 8
Using the Remote Control (continued) 2 Battery Replacement NOTE: Do not mix old and new batteries. Do not mix alkaline, standard (carbon zinc), or rechargeable (nicad, nimh, etc.) batteries. WARNING: Do not ingest batteries. 1. 2. 3. 4. Non-rechargeable batteries are not to be recharged. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the product. Always purchase the correct size and grade of battery most suitable for the intended use. 5.
PAGE 9
Care and Maintenance WARNING: Always disconnect from the power supply before cleaning the heater. First turn off the main power. Then remove the electrical plug from the wall outlet. WARNING: Do not use this fireplace insert if any part of it has been under water. Immediately call a qualified service technician to inspect the firebox and replace any part of the electrical system which has been under water.
PAGE 10
Troubleshooting Problem Solution Cannot adjust the temperature. □ To adjust temperature, turn on the Heater, then press the Heater button to enter Temperature Adjustment Mode. The LED display will start to flash, then press the Heater button repeatedly until you reach your desired temperature setting. (See "Using the Heater Control" in the OPERATION section of this Guide for more details). Cannot turn off the heater using the Heater Button.
PAGE 11
PAGE 12
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.