HP319200TX HALL TREE/UMBRELLA STAND Assembly Instruction For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.
HP319200TX HALL TREE/UMBRELLA STAND Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw diagrams below.
D 1PC E 1PC F 1PC FLAT WASHER 1/4” x1.0mm FINIAL Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Avoid rubbing or scratching the surface with rough or abrasive objects. Assembly Tool Required No.2 Phillips Screwdriver WRENCH For replacement parts or questions, please call Customer Service at 1-800-633-5096. Do not return product to store. Please call manufacturer for assistance, questions or parts.
HP319200TX HALL TREE/UMBRELLA STAND Assembly Instruction A C D DO not tighten screws & bolts until the entire unit is completely assembled. Step 1: Attach (2) bottom tube to (1) frame base by using Screw (A), washer (C) & (D) as shown. Figure 1 3 Step 2: Turn the unit upside down and attach (3) middle tube to (2) bottom tube by using screw (B) as shown. .
E 5 Step 3: Put (6) bottom hanger & (5) top hanger through (4) top tube, then attach both hanger to (4) top B 6 B 4 tube by using screw (B) as shown. Finally put (E) finial onto the top as shown. Figure 3 B 4 Step 4: Attach top unit to base unit by using screw (B) as shown. 3 YOUR NEW HALL TREE/UMBRELLA IS FINISHED AND READY TO USE Figure 4 Customer Service 1-800-633-5096 service@seidal.com Southern Enterprises, Inc.
We'd love to hear from you! Email us photos of our products in your home at sei@seidal.com and we might feature it on our site or use it to model one of our inspirational photos.
