Instructions / Assembly
Table Of Contents
- WHAT IS COVERED
- WHAT IS NOT COVERED
- Pre-Installation
- Planning Installation
- Tools Required
- hARDWARE INCLUDED
- Pre-Installation (continued)
- Package Contents
- LO QUE ESTA CUBIERTO
- LO QUE (NO) ESTA CUBIERTO
- Pre-Instalación
- PLANIFICACIÓN DE LA INSTALACIÓN
- HERRAMIENTAS NECESARIAS
- HARDWARE Includio
- Pre-Instalación (continuación)
- CONTENIDO DEL PAQUETE
- CE QUI EST COUVERT
- CE QUI EST COUVERT (ET PAS)
- Pré-Installation
- PLANIFICATION DE L'INSTALLATION
- OUTILS REQUIS
- Materiel inclus
- Pré-Installation (suite)
- CONTENU DE L'EMBALLAGE
7 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistancee.
Installation (continued)
5
Securing the fixture ring
□ Hold the fixture ring (D) so the arrow label on
the fixture ring (D) is pointing up.
□ Align the arrow on the fixture ring (D) with the
arrow on the fixture (A) so the arrows point
to each other.
□ Place the fixture ring (D) over the fixture (A). Turn
the fixture ring (D) clockwise until the fixture
ring (D) locks into place (just a few inches).
□ Once the fixture ring (D) is installed, remove the
arrow label on the fixture ring (D).
Care and Cleaning
□ Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or
removing the
fuse from the fuse box.
□ Clean the fixture with a soft, dry cloth.
□ Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem
Possible Cause
Solution
The fixture will not
light.
The power is off.
Ensure the power supply is On.
The circuit breaker is off.
Ensure the circuit breaker is in the On position.
The fuse blows or
circuit breaker
trips when the light
is turned on.
The wires are crossed or the
power wire is grounding out.
□
Check the wire connections.
□ Contact a qualified electrician or call the
Customer Service Team at 1-800-986-3460.
WARNING: If not locked in place, the fixture ring (D)
may fall and cause serious injury.