Installation Guide

TOOLS REQUIRED
MOUNTING INSTRUCTIONS FOR
MIRRORS AND PICTURE FRAMES
Safety Glasses Tape Measure
Phillips Head
Screwdriver
Power Drill
Hammer
Level
STEP 1:
STEP 3:
STEP 5:
STEP 2:
STEP 4:
STEP 6:
WARNING
- Read and follow instructions carefully.
- Keep small parts away from children.
- Consult a qualified professional if you are unsure about
your wall type, whether utility lines are behind your wall
or if you’re unsure what mounting hardware to use.
THANK YOU
We appreciate the trust and confidence you have placed in Home
Decorators Collection. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for
choosing Home Decorators Collection!
Measure the distance between the mounting hardware on the
back of the frame with a tape measure.
If using drywall anchors, use a power drill (follow anchor manu-
facturer instructions) to pre-drill pilot holes in each point.
DANGER: Ensure that you are not drilling into utility lines within the wall.
Use a phillips head screwdriver to insert the screws into the stud
or drywall anchors. Leave a gap between the screw head and wall
to catch the frame mounting hardware.
Using a pencil, mark the mounting hardware distance on your wall.
Use a level to ensure that the two points are straight and level.
Lightly tap the drywall anchors into the pilot holes with a hammer
until anchor head is flush with the wall.
Insert frame mounting hardware onto the screws and enjoy.

Summary of content (1 pages)