Specification

50 51
Accessories
Most Wall cabinets can be
ordered as “Cabinet Fronts
Only”. Face frame, doors,
hinges and bumpers will be
supplied and shipped loose.
Please consult CFO availability
guide on page 60.
Cabinet Fronts Only (CFO)
Cabinet Fronts Only (CFO)
Most Tall cabinets can be
ordered as "Cabinet Fronts
Only". Face frame, doors,
hinges and bumpers will be
supplied and shipped loose.
Please consult CFO
availability guide on page 60.
Most Base cabinets can be
ordered as “Cabinet Fronts
Only”. Face frame, doors,
drawer fronts, hinges, and
bumpers will be supplied and
shipped loose. In addition,
plastic corner blocks will
be supplied for false front
installation requirements.
Please consult CFO availability
guide on page 60.
Cabinet Fronts Only (CFO)
Matching Wall End Panels
MWEP30
MWEP36
MWEP42
- 3/4" thick
- Field installation
- Panel is for Left or Right application & fits flush against
cabinet sides
NOTE: Cannot be used in conjunction with Custom Depth Cabinets
NOTE: For WVW, WVG or WVB the matching panel will not be a flush
application. Field adjustment to the side of the cabinet will be required
Matching Base End Panel
5
/8"
1
/4"
34
1
/2"
23
7
/8"
*
- 3/4" thick
- Field installation
- Panel is for Left or Right application & fits flush against
cabinet sides
NOTE: Cannot be used in conjunction with Custom Depth Cabinets
NOTE: VG, VW or VB bottom rail is a 3” wide rail vs the 7 ½” extended
bottom rail
MBEP
8'
1⁄8"
4½"
8’ Finished Toe Kick – Matches Frame Color
MTK8
- 1/8" thick plywood finished with laminate color matched
to cabinetry face frame
- Field modified and installed
Accessories
21" Deep Vanity Sink Base Liner
VSBL2124
VSBL2730
VSBL3336
20¼"
22½", 28½", 34½"
- Helps protect sink cabinet from damage due to leaks in
piping or drains
- VSBL2124 can be trimmed to fit VSB2121 or VSB2421
- VSBL2730 can be trimmed to fit VSB2721 or VSB3021
- VSBL3336 can be trimmed to fit VSB3321 or VSB3621
- Field installed
- Grey polystyrene easy to clean surface
- Not for use in custom-depth cabinetry
12"
18"
20"
TD12CR
TD18CR
- Available in 12" & 18" heights
- Chrome finish
- Stores baking sheets, serving
dishes, etc.
- Comes with 4 clips & fasteners
- Attaches to cabinet middle or
bottom shelf
- Field installed
- Not for use in custom-depth
cabinets
Tray Dividers
SBL2730
SBL3336
- Helps protect sink cabinet from damage due to leaks
in piping or drains
- Sleek surface for easy cleanup
- SBL2730 can be trimmed to fit SB27 or SB30
- SBL3336 can be trimmed to fit SB33 or SB36
- Field installed
- Grey polystyrene easy to clean surface
- Not for use in custom-depth cabinetry
Sink Base Liner
23¼"
28½" or 34½"
- Kit attaches to sink base false drawer
front to create tilt-out drawer
- Holds sponges, scouring pads, dish
soaps, etc.
- Stainless steel construction
- Field installed prior to countertop
* Two trays included to fit double false fronts
Tilt-out Tray Kits
3"
24", 27", 30", 33", 36"
1-11/16"
SBTOTK24
SBTOTK27
SBTOTK30
SBTOTK33
SBTOTK36
*
*
- Includes fill stick, touch-up pen, and 4 door bumpers
Touch-Up Kit
TUK
3"
11¾"
9
7
�8"
U-Shaped Tray Divider 3" - Chrome
USTD3-CR
- Bakeware Organizer
- Use 2 or more to organize cabinet
- Can be used in base or wall cabinet
- Field installation with only 4 screws
PL AY
DESIGN TIP