Instructions / Assembly

Assembly (continued)

Preparing the door for installation

□ Locate the right door (I) and left door (H) and place on a soft surface to

protect the ﬁnish.

□ Place the open side of each hinge (GG) into the recessed area on

each of the right door (I) and left door (H). Insert and tighten two

hinge screws (FF) into each of the two holes in each hinge. Do not

overtighten screws.

Installing the door

□ Line up and insert the other end of the door hinges (GG) into the

recessions in the left and right side exterior panels (D) of the

assembled mantel.

□ Secure the door hinges (GG) to the mantle using eight screws

(FF).

□ Secure the handles (HH) to the left and right doors (H,I) by

inserting the handle bolts (DD) through the left and right doors

(H,I) and tighten until snug.

Inserting the ﬁrebox

□ Attach the top trim (Q) (optional) with the 3

screws (QQ) provided (spare included).

□ Insert the ﬁrebox insert (P) into the mantel from the rear. Be

very careful not to scratch the base (C).

□ Viewing from the front of the mantel, ensure that the ﬁrebox

insert (P) is in the center of the opening.