Instructions / Assembly

12
2
Using the manual control
□ To turn the firebox on and off, press the main power
switch (5).
□ Press the power button (1) on the control panel (P). The
flame effect will turn on.
□ Press the flame “+” or flame “–” button (2) to achieve the
desired effect (no heat).
□ Press the heat button (4) once for “low” or twice for “high”
to achieve the desired level. Press the button a third time
to turn the heating cycle off.
□ To illuminate the firebox, press the light button (3).
1
2
3 4
Operation
1 3 2 2 4 5
P
N
NOTE: The flame effect is always active when the heating
cycle is operational.
NOTE: The main power button (5) on the firebox must be
turned on for the remote control to function.
NOTE: The flame effect is always active when the heating
cycle is operational.
1
Using the remote control
□ Press the power button (1) on the remote control (N). The
flame effect will turn on.
□ Press the flame “+” or flame “–” button (2) to achieve the
desired effect (no heat).
□ Press the heat button (4) once for “low” or twice for “high”
to achieve the desired level. Press the button a third time
to turn the heating cycle off.
□ To illuminate the firebox, press the light button (3).