Instructions / Assembly

7
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly
1
Preparing the base
□ Locate the base (B) and place on a soft surface to
protect the finish.
□ Insert eight cam lock dowels (AA) into the threaded
holes. Make sure the threaded side is facing down
so you can insert and tighten each cam lock dowel
(AA) into each threaded hole in the top of base (B).
Do not overtighten the cam lock dowels (AA).
□ Insert eight wood dowels (CC) into the unthreaded
holes into the top of the base (B).
2
Assembling the panels
□ Locate the side panels (D), left interior panel (E)
and right interior panel (F).
□ Line up and insert the cam lock dowels (AA) on the
base (B) into the holes of the exterior panels (D).
□ Push the panels together until flush with the top of
the base (B). Tighten the cam locks (BB) by turning
clockwise. Do not strip the cam locks by over
tightening.
□ Repeat the steps for the second side panel (D), left
interior panel (E), and right interior panel (F).
□ Insert eight wood dowels (CC) into the holes on the
top of each panel. Two wood dowels per panel.
AA
CC
3
Preparing the fixed shelf
□ Locate the fixed shelf (C) and place on a soft surface
bottom side up to protect the finish.
□ Insert eight cam lock dowels (AA) into the threaded holes.
Make sure the threaded side is facing down so you can
insert and tighten each cam lock dowel (AA) into each
threaded hole in the bottom of the fixed shelf (C). Do not
overtighten the cam lock dowels (AA).
□ Locate the two door stoppers (MM). Align the holes in
the door stoppers (MM) with the pre-drilled holes in the
bottom of the fixed shelf (C). Make sure the flange is
facing the front of the shelf.
□ Fasten the door stoppers (MM) to the fixed shelf (C) using
four small screws (JJ).
CC
BB
AA
JJ
MM