Instructions / Assembly

8
Assembly (continued)
4
Assembling the fixed shelf
□ Turn the fixed shelf (C) upright.
□ With a partner, align the cam lock dowels (AA)
with the holes in the top of each panel (D, E,
F). It is easier to start at one side and align the
holes and wooden dowels (CC) in each panel
one at a time.
□ Push the fixed shelf (C) until flush with the top
of the panels (D, E, F). Insert eight cam locks
into the top holes of panels (D, E, F).
□ Tighten the cam locks (BB) by turning
clockwise. Do not strip the cam locks by over
tightening.
□ Insert four wood dowels (CC) into the holes on
the top of the fixed shelf (C).
5
Assembling the upper side
panels
□ Locate the two upper side panels (G). Align
the cam lock dowels (AA) and wood dowels
(CC) with holes in the bottom of the upper side
panels.
□ Push the upper side panels (G) until flush with
the top of the fixed shelf (C). Insert four cam
locks into the holes of the upper side panels (G).
□ Tighten the cam locks (BB) by turning clockwise.
Do not strip the cam locks by over tightening.
□ Insert four wood dowels (CC) into the holes on
the top of the upper side panels (G).
6
Preparing the top
□ Locate the top (A) and place on a soft surface,
bottom side up, to protect the finish.
□ Insert four cam dowels (AA) into the threaded
holes. Make sure the threaded side is facing down
so you can insert and tighten each cam lock dowel
(AA) into each threaded hole in the bottom of the
fixed shelf (C). Do not overtighten the cam lock
dowels (AA).
□ Insert four cam lock dowels (AA) into the threaded holes. Make sure the threaded side is facing down so you can insert and tighten
each cam lock dowel (AA) into each threaded hole in top of the fixed shelf (C). Do not overtighten the cam lock dowels (AA).
AA
AA
CC
BB
CC
BB
AA
AA