Instructions / Assembly

Attaching the blades to the blade

arms

Attach the blades (G) to the blade arms (H) using the three

blade attachment screws and ﬁber washers (BB). Insert a

blade attachment screws and ﬁber washers (BB) into the

blade arm (H), but do not tighten.

Repeat for the two remaining screws and ﬁber washers (BB).

Tighten each screw securely starting with the center screw.

Make sure the blade (G) is straight.

Repeat these steps for the remaining blades.

Assembly — Attaching the Fan Blades

Fastening the blade assemblies to

the motor

WARNING: To reduce the risk of personal injury, do not bend

the blade arms (H) while installing, balancing the blades (G),

or cleaning the fan. Do not insert foreign objects between

rotating fan blades (G).

Fasten the blade assemblies to the fan motor assembly (F)

by lining up the slots (QQ) of the motor with the tabs (RR) on

the blade arms (H).

Tighten the two blade arm screws with lock washers (SS)

already installed in the blade arms (H).

Repeat this procedure for the remaining blade arms (H).

Please contact 1-877-592-5233 for further assistance.

HOMEDEPOT.COM/HUBSPACE