Instructions / Assembly

Please contact 1-877-592-5233 for further assistance.

HOMEDEPOT.COM/HUBSPACE

Operation (continued)

To install the remote control bracket (XX), remove the two

screws holding the switch cover plate (YY). Do not remove the

cover plate (YY). Orient the bracket (XX) by lining up the two

mounting holes with those on the cover plate (YY). Insert and

tighten the screws (ZZ).

Then install the remote control holder (AAA), orient the remote

control holder (AAA) by lining up the two mounting holes with

those on the remote control bracket (XX). Insert and tighten the

screws (BBB).

INSTALLING THE REMOTE CONTROL HOLDER

To install the remote control holder (AAA), orient the remote

control holder (AAA) by lining up the two mounting holes with

those on the cover plate (CCC). Insert and tighten the screws (ZZ).

FOR ROCKER-STYLE STYLE COVER PLATE

AAA

CCC

AAABBB

WARM/COOL WEATHER OPERATING

INSTRUCTIONS

NOTE: The fan reverse buttons must be pressed while the

fan is running.

Speed settings for warm or cool weather depend on factors such as

the room size, ceiling height, numbers of fans.

Warm weather - (Counterclockwise Direction) A downward air ﬂow

creates a cooling effect. This allows you to set your air conditioner

on a warmer setting without affecting your comfort.

Cool weather - (Clockwise Direction) An upward air ﬂow moves warm

air off the ceiling. This allows you to set your heating unit on a cooler

setting without affecting your comfort.