Installation Guide

Hook Rail Mounting Instructions
Liberty Hardware Manufacturing Corporation
140 business Park Drive
Winston-Salem, NC 27107
If you have any trouble, visit: www.libertyhardware.com.
Or call 1-800-542-3789
Wear safety goggles
When drilling into the wall, exercise care to avoid any electrical wiring or
plumbing that may be located behind the wall. Damaged electrical wiring
can cause electrical shock and/or fire.
Instructions for Solid Wood or Wood Stud Mount Installation
1. Place hook rail in desired location.
2. Mark mounting hole locations.
3. Drill 3/32" pilot holes.
4. Fasten hook rail using screws provided.
Note: Anchors not included. The maximum capacity for this hook rail is 35 lbs. when
mounted into solid wood or wood studs.
Instructions for Drywall, Green Board, Metal Stud, or Concrete.
For applications other than solid wood or wood studs, use anchors designed for your
specific application and follow manufacturer's installation instructions. The maximum
capacity of hook rail will vary depending on the thickness of the wall material and type
of attachment hardware used, but will never exceed 35 lbs.

Summary of content (3 pages)