TDS

Solid Core
TECHNICAL DATA SHEET
Effective: January 20, 2020
Page 1 of 1
(866) 843-8453 | homedepot.com
PHYSICAL PROPERTIES (FLOATING SOLID CORE FLOORING) 4.8MM GAUGE / 6ML WEAR LAYER
Collection
Plank
Plank
Plank
Tile
Size
7.48" x 47.64" (190mm x 1210mm)
7.09" x 47.64" (180mm x 1210mm)
6" x 42" (152.4mm x 1066.8mm)
12" x 23.82" (304.8mm x 605mm)
Overall Gauge
4.8mm (0.189”)
4.8mm (0.189”)
4.8mm (0.189”)
4.8mm (0.189”)
Wear Layer
6mil (0.15mm)
6mil (0.15mm)
6mil (0.15mm)
6mil (0.15mm)
Core
4.0mm (0.157”) Solid Core
4.0mm (0.157”) Solid Core
4.0mm (0.157”) Solid Core
4.0mm (0.157”) Solid Core
Pad
0.8mm (0.031”) PE
0.8mm (0.031”) PE
0.8mm (0.031”) PE
0.8mm (0.031”) PE
Use
Residential and Light Commercial
Residential and Light Commercial
Residential and Light Commercial
Residential and Light Commercial
Profile
Painted Bevel
Square Edge
Square Edge
Painted Bevel
Finish
Enhanced Ceramic Bead
Enhanced Ceramic Bead
Enhanced Ceramic Bead
Enhanced Ceramic Bead
Embossing(s)
Natural Timber
Natural Timber
Natural Timber
Coral
Coverage/Carton
10 pieces 24.7 Sq.Ft. (2.3 Sq.M.)
10 pieces 23.4 Sq.Ft. (2.2 Sq.M.)
14 pieces 24.5 Sq.Ft. (2.3 Sq.M.)
10 pieces 19.8 Sq.Ft. (1.8 Sq.M.)
Limited Warranty
Lifetime Residential and
5-Year Light Commercial
Lifetime Residential and
5-Year Light Commercial
Lifetime Residential and
5-Year Light Commercial
Lifetime Residential and
5-Year Light Commercial
STANDARDS MANUFACTURING & USAGE (ASTM F3261)
Standard
Description
Requirements
Results
ASTM F3261
Physical Characteristics / Tolerances
Refer to Standard
Passes Requirements
1
ASTM F1914
Residual Indentation
Average: ≤ 0.007" (0.18mm)
Passes Requirements
ASTM F1914
Surface Integrity
No puncture into rigid core
Passes Requirements
ISO 23999
Dimensional Stability
0.25% / lineal ft. (305 mm)
Passes Requirements
ISO 23999
Curling
0.080" (2.0mm)
Passes Requirements
ASTM F925
Chemical Resistance
No more than “Slight Change”
Passes Requirements
ASTM F1514
Resistance to Heat
Average ΔΕ < 8.0
Passes Requirements
ASTM F1515
Resistance to Light
Average ΔΕ < 8.0
Passes Requirements
ASTM F970
Static Load
Not Applicable (6mil Wear Layer)
0.005” (0.13mm), 250psi
SIM Test
Static Load Limit
Test to Limit (±0.005”)
800psi
STANDARDS SAFETY & PERFORMANCE
Standard
Description
Requirements
Results
ASTM E648
Critical Radiant Flux (Radiant Panel)
Class I: 0.45 W/cm
2
Passes Requirements
2
ASTM E662
Smoke Density
Flaming & Non-Flaming 450
Passes Requirements
3
ASTM D2047
Coefficient of Friction (Slip Resistance)
Not Applicable (No Official Requirements)
0.6 (Dry)
REACH SVHC
(181) Substances of Very High Concern
Per Substance: ≤ 0.1% w/w (weight/weight)
Passes Requirements
ASTM F963
Heavy Metals
Refer to Standard
Passes Requirements
ASTM D7823
Phthalates
Refer to CPSIA
4
Passes Requirements
STANDARDS SOUND
Assembly
ASTM E90
ASTM E492
ASTM E2179
Results (Remarks)
6” Concrete Slab
STC 51
IIC 54
ΔIIC 24
Tested assemblies pass IBC
5
requirements of STC
≥ 50 and IIC ≥ 50 for multi-story dwellings
6” Concrete Slab with Drop-Ceiling
STC 60
IIC 67
Not Applicable
Notes
1) ASTM F3261 - Physical Characteristics / Tolerances: encompasses Size, Squareness, Thickness, Flatness, Openings, and Ledging.
2) ASTM E648 - Critical Radiant Flux (Radiant Panel): Passes Requirements for Class I per International Building Code (IBC) 2018 & NFPA 101 Life Safety Code.
3) ASTM E662 - Smoke Density: 450 is the limit established by many state, county, and/or local building and/or fire codes, but is not set as a limit for (resilient) flooring products
nationwide. Thus, Smoke Density requirements for flooring products may vary from jurisdiction to jurisdiction.
4) CPSIA = Consumer Product Safety Improvement Act.
5) IBC = International Building Code.

Summary of content (1 pages)