Ships in 7-10 Days All Plywood Construction Soft Close Doors & Drawers Factory Built in the USA Limited Lifetime Warranty SPECIFICATION GUIDE SEMI-CUSTOM KITCHEN AND BATH CABINETRY hdckitchens.
Semi-Custom Kitchen & Bath Cabinetry Limited Lifetime Warranty Home Decorators Collection (warrantor) warrants to the original consumer purchaser, that all products manufactured or supplied by warrantor will be free from defects in material and workmanship. This warranty is for your lifetime as long as you own the cabinetry, on product used for Residential Purposes only and is not transferable to subsequent owners. Proof of Purchase is required.
Table of Contents Door Styles ....................................................................................................... 2-4 Cabinet Construction............................................................................................ 5 Customization Options.......................................................................................... 6 Wall Cabinets & Accessories............................................................................
Shaker Square Recessed Panel Door Styles Newport Pacific White (NPW) Tremont Pearl Gray (TPG) - 3/4" thick x 3" wide solid MDF Shaker style mortise and tenon framed doors with 5/8" thick solid MDF recessed center panels - 3/4" thick x 3" wide solid MDF Shaker style mortise and tenon framed doors with 5/8" thick solid MDF recessed center panels - 3/4" thick x 3" wide solid MDF Shaker style mortise and tenon framed drawer fronts with 5/8" thick solid MDF recessed center panels - 3/4" thick x 3" wide soli
Square Raised Panel Miter Frame Door Styles Brookfield Pacific White (BPW) - 3/4" thick x 2¾" wide solid MDF ‘pillow top’ mitered framed doors with 5/8" thick solid MDF raised center panels - 3/4" thick x 2¾" wide solid MDF ‘pillow top’ mitered framed drawer fronts with 5/8" thick solid MDF raised center panels - 8" high drawer fronts feature a 2" wide mitered frame - Fully concealed hinges - Available in Pacific White painted finish - Decorative hardware required Lewiston Toffee Glaze (LTG) - 3/4" thick
Square Raised Panel with Applied Molding Door Styles Coventry Pacific White (CPW) Holden Bronze Glaze (HBG) - 2-3/8" wide x 3/4" thick solid MDF mortise and tenon framed doors with 5/8" thick solid MDF raised center panels and 1" wide applied mitered MDF accent molding - 2-3/8" wide x 3/4" thick solid MDF mortise and tenon framed doors with 5/8" thick solid MDF raised center panels and 1" wide applied mitered MDF accent molding - 2-3/8" wide x 3/4" thick solid MDF mortise and tenon framed drawer fronts
Full Overlay Cabinet Construction 4 5 2 10 3 9 1 7 6 5 8 13 1 INTERIOR Light stained birch wood veneer provides a durable, wipe clean finish 2 FACE FRAME 1½" wide x 3/4" thick solid hardwood, doweled and joint-glued 3 END PANELS 1/2" thick CARB2 plywood with natural birch wood veneer interior and raw veneer exterior. EXPOSED SIDES REQUIRE FINISHED END PANELS. 4 FLOOR & CEILING 1/2" thick CARB2 plywood with natural birch wood veneer both sides captured by end panels.
Customization Options FACTORY FINISHED ENDS CUSTOM DEPTH - Cabinets are manufactured with an unfinished wood veneer exterior. Exposed sides (visible once installation is complete) require a color matched end panel. - Available on standard cabinet types in 1" depth increments CUSTOM DEPTH - Factory Finished Ends are available for all standard cabinets up to 90" tall - Specify Left Side, Right Side or Both - Finished Ends are wood veneer plywood, in a color matched stain.
Wall Cabinets 15" High Double Door WALL CABINET CODING STANDARD (12" DEEP) REFRIGERATOR (24" DEEP) W 30 30 W 36 24 18 Cabinet Code Cabinet Width Cabinet Height Cabinet Code Cabinet Width Cabinet Depth Cabinet Height ", 36" 30", 33 15" CUSTOM DEPTH W3015 W3315 W3615 · Standard wall cabinets are 12" deep. Refrigerator wall cabinets are 24" deep.
Wall Cabinets 18" High x 24" Deep Double Door " 30", 36 CUSTOM DEPTH DEPTH 1" 5", 18", 2 9", 12", 1 W302418 W362418 18" CUSTOM 30" High Single Door SPECIFY RIGHT or LEFT HINGED W0930 *W1230 *W1530 *W1830 W2130 30" 24" 12" - No adjustable shelf - Two adjustable shelves - Must be installed between two cabinets, cabinet and wall, or supported by refrigerator panels (RP) doors available in select styles. * Mullion Consult availability guide on page 14.
Wall Cabinets 30" High Double Door ", 24", 27 CUSTOM ", 36" 30", 33 DEPTH *W2430 W2730 *W3030 W3330 *W3630 30" 30" High Double Door with Pull Down Chrome Shelves 24" W2430-PDSCR - Field install at desired height in cabinet 30" 12" - Two tier chrome shelves lowers 10" and brings items forward 14¾" - Gas assisted mechanism smoothly raises and lowers unit - Locking arm feature holds shelf in down position 12" - Two adjustable shelves doors available in select styles.
Wall Cabinets 30" High Double Door with Pull Down Frosted Shelves 30" High Wall Angle SPECIFY RIGHT 20" or LEFT HINGED Wall Corner 24" W2430-PDSFR *WA2430 Wall Corner 20" 20" 30" - Field install at desired height in cabinet - Features 5 removable acrylic storage bins - Lowers items 10" and brings forward 14¾" - Gas assisted mechanism smoothly raises and lowers unit 12" 36" High Double Door with Pull Down Frosted Shelves 24" 20" - Two adjustable shelves doors available in select styles.
Wall Cabinets 36" and 42" High x 15" Deep Wall Angle 27" SPECIFY RIGHT or LEFT BLIND WBCU2742 42" 23" 27" 27" DEPTH *WA271536 15" *WA271542 23" Wall Corner 36" or 42" 15" 15" Blind Closure Panel 23" 36" 15" or 42" CUSTOM 24" SPECIFY 23" RIGHT or LEFT HINGED Wall Corner 27" 42" High Wall Blind Corner 15" 15" - Three adjustable shelves doors available in select styles. * Mullion Consult availability guide on page 14.
Wall Cabinets 12" Deep Wine Rack 12" Deep Wall End Open Shelf WEOS630 WEOS636 WEOS642 WRX3018 30" - Reversible, may be installed left or right - 1/4" thick wood veneer side is cut back to fit behind frame of adjacent cabinet - 1¼" thick solid wood square corner top and bottom shelves - Matching interior and exterior standard - 3/4" thick solid wood “X” shelf - Must be installed between two cabinets or cabinet and wall Range Hood Combo - Straight Valance 9.69" " 31 able mm Tri 19.32" 10.84" " .
Wall Cabinets Fluted Fillers FF330 FF336 FF342 ¾" 1½" 15" Wide Wall Skin - 3/16" thick - Field installed - Matching veneer plywood exterior for wood finishes - BG, CB, CN, MG, TG - Matching painted MDF exterior for painted finishes - AW, PG, PW 36" 42" 30" 36" 42" - 3/4" thick solid wood - Face and all edges finished - May be trimmed 1/2" each side 1½" NOTE: Cannot be used in conjunction with Factory Finished Ends - Available in all styles except PG 3" 14¼" Angle Fluted Fillers ¾" AFF330 AFF342
Wall Cabinets Matching Wall End Panels MWEP30 MWEP36 MWEP42 Shelf Kits SK1212 SK1512 SK1812 SK2112 SK2412 SK2712 SK3012 SK3312 SK3612 - 3/4" thick plywood faced with light birch veneer finish - Edgebanded on front edge - One shelf and set of clips per kit EXAMPLE: 36" wide wall cabinet uses Shelf Kit SK3612 - 3/4" thick - Field installation - Panel is for Left or Right application & fits flush against unfinished cabinet sides Wood Furniture Shelf NOTE: Cannot be used in conjunction with Factory Fini
Wall Cabinets Mullion Door A B MD1230 MD1530 MD1830 MD1236 MD1536 MD1836 A A A A A MD1242 MD1542 MD1842 B B A A A C A A C C Mullion Door Specification, Availability & Usage Guide MULLION DOOR # OF DESCRIPTION SKU LITES DIMENSIONS (inches) A B C DESIGNED TO FIT THESE CABINETS AVAILABILITY MD1230 12x30 Mullion Door 6 8 29-11/16 11-11/16 W1230, W2430 (x2) All Styles Except HAW MD1530 15x30 Mullion Door 6 8 29-11/16 14-11/16 W1530, WA2430, W3030 (x2) All Styles Except
Base Cabinets 24" Deep Double Door BASE CABINET CODING " 33", 36 B 30 - 2T Cabinet Code Cabinet Width 34½" · · · · Standard Base Cabinets are 24" deep and 34½" high Desk Height base cabinets are 21" deep and 28½" high Cabinet depth does not include door thickness Products are available in all door styles unless stated otherwise · Standard cabinet exterior is unfinished veneer, exposed sides require Finished Ends or Matching End Panels 1" ", 18", 2 12", 15 CUSTOM 21½" - One full-depth adjustable s
Base Cabinets 24" Deep Double Door with 1 Roll-Out Tray " 33", 36 24" B33-1T B36-1T 34½" 24" Deep Double Door with 2 Roll-Out Trays " 33", 36 24" B33-2T B36-2T 34½" 21½" 21½" - One full-depth adjustable shelf - One full width roll-out tray - Two full-depth roll-out trays 24" Deep Single Door with 1 Chrome Roll-Out Tray 24" Deep Single Door with 2 Roll-Out Trays 1" ", 18", 2 12", 15 SPECIFY RIGHT or LEFT HINGED 24" B12-2T B15-2T B18-2T B21-2T 34½" " 15", 18 B15-1WT B18-1WT 34½" 21½" 21½"
Base Cabinets 24" Deep Single Door with 2 Chrome Roll-Out Trays " 15", 18 24" Deep Double Door with 2-Tier Cookware Organizer SPECIFY RIGHT or LEFT HINGED 24" 24" 24" B15-2WT B18-2WT B24-CWO 34½" 34½" 21½" 21½" - FIELD INSTALLED - Two chrome wire tiers operate independently - Adjustable dividers accomodate different size cookware - FIELD INSTALLED - Two full width chrome wire roll-out trays - Features Full-Extension runners 24" Deep Double Door with 2 Chrome Roll-Out Trays 24" 24" 24" Deep S
Base Cabinets 24" Deep Base Single Wastebasket " 15", 18 B1WB15 B1WB18 24" Deep Base - 4 Drawers 36" CUSTOM 24" - Basket slides on heavy duty, full extension runners - 35 quart capacity plastic basket is secured by epoxy coated white wire “cage” 34½" DEPTH BD36 24" 34½" - White basket is removable - Top mount roll-out tray for trash bag storage - SOFT CLOSE DOOR (SCD) OPTION NOT AVAILABLE 24" Deep Base Double Wastebasket B2WB18 B2WB21 " 18", 21 21½" - Basket dimensions: 14"W x 10"D x 18"H
Base Cabinets 24" Deep Sink Base ", 30" 24", 27 24" Deep Farm Sink Base CUSTOM 24" DEPTH 36" CUSTOM DEPTH 24" FSB36 SB24 SB27 SB30 13½" 34½" 34½" 21½" 21½" - Front rail is field modified to fit sink - No shelf • CUSTOM DEPTH: 9" to 23" deep - No shelf, false drawer front - May also be used as drop-in cooktop base • CUSTOM DEPTH: 9" to 23" deep 24" Deep Sink Base " 33", 36 CUSTOM 24" DEPTH Sink Front Angle FACE FRAME & DOOR SFA36 SB33 SB36 34½" CORNER FLOOR SFAF36 21½" 17" - No shelf
Base Cabinets Blind Base Corner Installation 33" and 36" Easy Reach Top View A C Wall Corner 33", 3 6" 3 8" 23 / Blind Base Cabinet SPECIFY RIGHT or LEFT HINGED EZR33 EZR36 23 3/8 " 24" 34½" 3" Filler Adjacent Base Cabinet Frame Opening 21½" - 2" 9",1 9", 12" One full depth “L” shaped shelf Interior shelf MUST be installed prior to counter top Doors open 170 degrees for easy access SOFT CLOSE DOOR (SCD) OPTION NOT AVAILABLE BLIND BASE INSTALLATION GUIDE and 36" Easy Reach Super Suzan 24
Base Cabinets 24" Deep Base Pantry Pullout 9", 12" 24" BPPO9 BPPO12 34½" 21" Deep Desk Drawer " 15", 18 28½" 21½" 18½" - Available in 9" & 12" width cabinets - Full extension ball bearing slides provide stable, smooth pullout function - Adjustable shelves with chrome rails 24" Deep Filler Pantry Pullout BFPO3 BFPO6 3", 6" 34½" 21½" DDR15 DDR18 21" - Available in 3" & 6" widths with matching Filler Strip - Full extension ball bearing slides provide stable, smooth pullout function - Adjustable
Base Cabinets Matching Base End Panel MBEP 24" Deep End Panel with Filler BEP1.
Base Cabinets 3" 4 Filler Strip (FS) FS30 24" Deep Base End Shelf FS630 12" SPECIFY RIGHT or LEFT (left shown) 24" - 3/4" thick solid wood - Face and all edges finished 9 5/8" 30" 34½" 9 1/8" ¾" 1½" 9 1/8" Fluted Filler (FF) FF330 21½" - 3/4" thick solid wood 3" or 6" - Face and all edges finished - May be trimmed 1/2" each side 30" - Available in all styles except PG - 3/16" thick wood veneer side and 1/2" thick solid wood back panel - 3/4" thick solid wood shelves - 3/16" thick wood ve
Base Cabinets Spice Drawer Insert Knife Block Insert 4", 27" ", 21", 2 15", 18 ", 21" 15", 18 SDI15 SDI18 SDI21 SDI24 SDI27 - Solid hardwood drawer insert KBI15 KBI18 KBI21 - Solid hardwood drawer insert - One full width front utensil compartment - Three 5" high angled tiers - Rear 4" deep compartment - Sized to fit inside 15", 18", 21", 24", 27" wide drawers - Not for use in custom-depth cabinetry KBI15: 10 knife slots + utensil compartment (fits B15, BD15) KBI18: 13 knife slots + utensil compartm
Base Cabinets Rollout Tray Kits Sink Base Liner 27 1",24", 18",2 2",15", 1 " 3",36 ",30",3 5" 20" ROT12 ROT15 ROT18 ROT21 ROT24 ROT27 - 5/8" solid wood dovetail construction ROT30 ROT33 ROT36 - Includes ¾ extension epoxy coated smooth-glide edge mounted runners - 75 lb.
Tall Cabinets CUSTOM 24" Deep Two Door Utility TALL CABINET CODING 18" U 24 24 84 DEPTH SPECIFY RIGHT or LEFT HINGED 24" U182496 42" Cabinet Code Cabinet Width Cabinet Depth - One fixed shelf dividing upper and lower doors, five adjustable shelves - Optional rollout trays or additional shelves available * Loose toe kick box for ease of installation Cabinet Height 96" · Standard Tall Cabinets are 24" deep · Add door thickness for total cabinet depth · Products are available in all door styles
Tall Cabinets 24" Deep Two Door Utility with Four Rollout Trays 18" 24" SPECIFY RIGHT or LEFT HINGED 24" Deep Four Butt Door Utility with Four Rollout Trays 24" U242484-4T 24" U182484-4T 30" - Four repositionable, full width rollout trays 84" 30" - One fixed shelf dividing upper and lower doors - Four repositionable, full width rollout trays - One adjustable shelf - Exposed sides require TSK84 84" - One adjustable shelf - Exposed sides require TSK84 21½" 21½" 24" Deep Two Door Utility with F
Tall Cabinets 24" Deep Two Door Utility with Four Pull-out Chrome Trays 18" 24" Deep Universal Oven SPECIFY RIGHT or LEFT HINGED 24" OC332484U U182484-PO4WS 24" - FIELD INSTALLED PULL-OUT UNIT - Pull-out unit includes 4 chrome baskets and optional door mounts - Top and bottom glides are soft closing and 250 lb.
Tall Cabinets Tall V-Groove Skin Tall Skin TSK84 TSK90 TSK96 - 3/16" thick - Field modified and installed - Matching veneer plywood exterior for wood finishes - BG, CB, CN, MG, TG - Matching painted MDF exterior for painted finishes - AW, PG, PW 96" - 3/16" thick v-groove matching exterior - Grooves spaced 1¼" on center - Field modified and installed - Matching veneer plywood exterior for wood finishes CB, CN, MG, TG 96" - Matching painted MDF exterior for painted finishes - AW, BG, PG, PW - Trimmable
Tall Cabinets Matching Toe Kick 8' Rollout Tray Kits MTK8 ¼" ", 12",15 6" ",33",3 27",30 ",24", 18",21 8' 5" 20" 4½" ROT12 ROT15 ROT18 - 1/4" thick wood veneer ROT21 ROT24 ROT27 ROT30 ROT33 ROT36 - 5/8" solid wood dovetail construction - Consult availability guide - Includes ¾ extension epoxy coated smooth-glide edge mounted runners - 75 lb. load capacity Cabinet Fronts Only (CFO) Most Tall cabinets can be ordered as "Cabinet Fronts Only".
Vanity Base Cabinets VANITY CABINET CODING 21" Deep Double Door Vanity Base " 33", 36 VSB 30 21 Cabinet Code Cabinet Width STANDARD 21" DEPTHS VB3321 VB3621 21" Cabinet Depth 34½" · Standard Vanity Base Cabinets are 21" deep and 34½" high CUSTOM · Cabinet depth does not include door thickness DEPTH · Custom Depths are available where indicated. Use Standard Base Cabinet coding to order as specified.
Vanity Base Cabinets 21" Deep Double Door Vanity Sink Base STANDARD 21" Deep Double Full Height Door Vanity Base 21" DEPTHS " 33", 36 3", 36" ", 30", 3 24", 27 VSB3321 VSB3621 21" STANDARD 21" 21" DEPTHS VB2421FH VB2721FH VB3021FH VB3321FH VB3621FH 34½" 34½" CUSTOM DEPTH CUSTOM DEPTH 18½" 18½" FOR CUSTOM DEPTHS FOR CUSTOM DEPTHS - No shelf, two false fronts · Order SB33 or SB36 · Select 9" to 23" depth 21" Deep Single Full Height Door Vanity Base 1" ", 18", 2 12", 15 21" SPECIFY RIGH
Vanity Linen & Wall Cabinets SPECIFY RIGHT or LEFT HINGED STANDARD 21" Deep Two Door Linen 18" 21" Deep Four Door Linen 24" 21" DEPTH 21" STANDARD 21" DEPTH VLC242184 21" VLC182184 30" 30" 84" 84" 18½" 18½" CUSTOM CUSTOM DEPTH DEPTH FOR CUSTOM DEPTHS FOR CUSTOM DEPTHS · Order U182484 · Select 9" to 23" depth · Order U242484 · Select 9" to 23" depth - One fixed shelf dividing upper and lower doors, four adjustable shelves - One fixed shelf dividing upper and lower doors, four adjusta
Vanity Wall Cabinets Angle Fillers Filler Strips AF330 ¾" 45° 3" 135° 30" 30" 84" 3" - 3/4" thick solid wood - 3/4" thick solid wood - Face and all edges finished - Face and all edges finished - Available in all styles except PG 4¼" FS30 FS630 FS84 3" 4 Fluted Fillers FF330 3" or 6" Matching Toe Kick 8' MTK8 ¾" 1½" ¼" 8' 30" 4½" - 3/4" thick solid wood - Face and all edges finished - May be trimmed 1/2" each side 1½" - Available in all styles except PG - 1/4" thick wood veneer 3
Molding Furniture Valance FV48 ¾" Scribe Molding SM8 48" ¼" 8' 5½" 5½" ¾" 5 1 8" - 3/4" thick solid wood - May be trimmed 3" on each end - 1/4" thick solid wood Valance VA48 ¾" BM8 Batten Molding 48" 8' ¼" ¾" 3" - 3/4" thick solid wood - May be trimmed on each end - 1/4" thick solid wood Inside Corner Molding ICM8 Angle Crown Molding 8' 8' ¾" 25/8" 1 7/8" ¾" - 3/4" thick solid wood Outside Corner Molding - 3/4" thick solid wood - Use with TMMS8 for top of cabinet installation
Molding Classic Crown Molding CCM8 Beaded Light Rail 8' BLR8 8' 2" 3 5/8" ¾" 1" 2¾" - 3/4" thick solid wood - Use with TMMS8 for top of cabinet installation - Available in all styles except PG and AW - 1" thick solid wood 3½" D 3½" W Top View TMMS8 Top Molding Mounting Strip 8' SPL Spindle Mounting Strip 34½" ¾" 3½" D 3½" W Molding Top View 13/16" - 3/4" thick solid unfinished wood - Recommended for installation of ACM8, CM8, CCM8, SCM8 moldings - Solid hardwood 1¾" D 3½" W Top Vi
Decorative Hardware - Brushed steel - Euro railing pull - Brushed nickel - Brushed nickel - Features dual mounting hole options DH45-100 - 7" Euro Pull DH44-346 - 8" Square Bar Pull DH116-120 - 10" Quadra Pull 3¾" center (96mm) 7½" center (196mm) 5" inside center (128mm) 8-13/16" outside center (224mm) DH45-102 - 10" Euro Pull* 6-15/16" center (176mm) DH45-104 - 13" Euro Pull* DH44-348 - 9" Square Bar Pull 8-13/16" center (224mm) DH116-122 - 11" Quadra Pull DH44-350 - 13" Square Bar Pull* 6-5
Decorative Hardware DH43-826 DH43-630 - Elongated oval knob - Antique pewter - 2" length - Elongated oval knob - Oiled bronze - 2" length DH43-828 DH43-632 - Classic pull Antique pewter 3-3/4" center (96mm) 4-3/4" outside length - DH43-824 - 1" Backplate for DH43-828 - Antique pewter - 3¾" center (96mm) - 5¼" outside length Screw-head cup pull Antique pewter 2-1/2" center (64mm) 4-1/8" outside length DH99-188 - Round knob - Brushed nickel - 1-1/4" diameter DH99-128 - Contemporary bow pull Bru
Decorative Hardware DH65-200 DH88-104 - Birdcage knob - Antique iron - 2-1/2" length - Arrowhead knob - Antique pewter - 3-1/2" length DH65-120 - DH88-110 Birdcage pull Antique iron 3-3/4" center (96mm) 4" outside length DH95-144 - DH87-102 Arrowhead pull Antique pewter 5" center (128mm) 7-1/2" outside length HDWE TEMPLATE-AW Hardware Drilling Template Align with door frame to quickly and accurately mark hole locations.
Cabinet Frame & Opening Dimensions 24" 30" 36" or 42" 27" 33" or 39" Wall Blind Wall Blind 9" 9" 3" 41
Cabinet Frame & Opening Dimensions NOTE: 96" TALL CABINETS ARE SUPPLIED WITH LOOSE TOE KICK BOX (EXPOSED SIDES REQUIRE TSK96) 42
Cabinet Frame & Opening Dimensions 21",24",27",30",or 33" 11/2" 131/2",15" 3" 131/2",15" 11/2" 6" Double Door Base 341/2" 2" 19" 11/2" 41/2" 24",27",30",33",36" NOTE: B27, B30 have full width drawers BBCU42 1 ½" 12" 9" BBCU39 1 ½" 1 ½" 9" 12" 9" 1 ½" 9" 1 ½" 6" 30" 19" 27" 30" 1 ½" 4 ½" 4 ½" 1 ½" 36" 30" DRAWER BOX INSIDE DIMENSIONS SHALLOW DRAWER CABINET HEIGHT DEPTH WIDTH B12, BD12 VB1221, VBD1221 B15, BBCU42, BD15 VB1521, VBD1521 DDO15, DDR15 B18, BD18 VB1821, VBD1821 B
CFO - Cabinet Fronts Only - Availability Guide - Most cabinets can be ordered as "Cabinet Fronts Only" (CFO) - Face frames, doors, hinges, and bumpers will be supplied and shipped loose - Doors are pre-drilled for hinge installation - In addition, plastic corner blocks will be supplied for false front installation requirements 44 CABINET CFO CABINET FRONT CABINET CFO CABINET FRONT W0930 W0936 W0942 W1230 W1236 W1242 W1530 W1536 W1542 W1830 W1836 W1842 W2130 W2136 W2142 W2430 W2436 W2442 W2730 W2736 W2
Sketch 45
Notes 46
Notes 47
hdckitchens.
