HOME INV# 74006 SK18210A1 WALKER CORNER BENCH 20"Hx30"Wx30"D ASSEMBLY INSTRUCTIONS Made In China 1 /13
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts, which may have came loose inside the carton during shipment. Count all parts and material hardware, then compare with parts list to be sure all parts are present. If any parts are missing or damaged, please contact our Customer Service Department for efficient and speedy service. Please indicate the model number and code letter of part(s) needed.
NOTE:THE SURFACE WITH THE STICKER IS THE BACK SIDE 3 /13
FIG 1 ● INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE LEFT SIDE BOTTOM PANEL (A). ● JOIN THE LEFT SIDE BACK PANEL (E) AND THE LEFT SIDE MIDDLE PANEL (H) TO THE LEFT SIDE BOTTOM PANEL (A) BY USING WOOD DOWEL (a) FIRST. ● TIGHTEN THE CAM LOCK BOLT (b) WITH THE CAM LOCK (c) FROM PRE-DRILLED HOLES.
FIG 2 ● INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE LEFT SIDE BOTTOM PANEL (A). ● JOIN THE FRONT PANEL (J) TO THE LEFT SIDE BOTTOM PANEL (A) BY USING WOOD DOWEL (a) FIRST. ● TIGHTEN THE CAM LOCK BOLT (b) WITH THE CAM LOCK (c) FROM PRE-DRILLED HOLES. ● COVER THE CAM HOLES WITH PLASTIC COVER (d).
FIG 3 ● INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE LEFT SIDE TOP PANEL (C). ● JOIN THE LEFT SIDE TOP PANEL (C) TO THE LEFT SIDE BACK PANEL (E) THE LEFT SIDE MIDDLE PANEL (H) AND THE FRONT PANEL (J) BY USING WOOD DOWEL (a) FIRST. ● TIGHTEN THE CAM LOCK BOLT (b) WITH THE CAM LOCK (c) FROM PRE-DRILLED HOLES. ● COVER THE CAM HOLES WITH PLASTIC COVER (d).
FIG 4 ● INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE RIGHT SIDE BOTTOM PANEL (B). ● JOIN THE RIGHT SIDE PANEL (G) AND THE FRONT PANEL (J) TO THE RIGHT SIDE BOTTOM PANEL (B) BY USING WOOD DOWEL (a) FIRST. ● TIGHTEN THE CAM LOCK BOLT (b) WITH THE CAM LOCK (c) FROM PRE-DRILLED HOLES. ● COVER THE CAM HOLES WITH PLASTIC COVER (d).
FIG 5 ● INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE RIGHT SIDE BOTTOM PANEL (B). ● JOIN THE RIGHT SIDE BACK PANEL (F) AND THE RIGHT SIDE MIDDLE PANEL (I) TO THE RIGHT SIDE BOTTOM PANEL (B) BY USING WOOD DOWEL (a) FIRST. ● TIGHTEN THE CAM LOCK BOLT (b) WITH THE CAM LOCK (c) FROM PRE-DRILLED HOLES.
FIG 6 ● INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE RIGHT SIDE TOP PANEL (D). ● JOIN THE RIGHT SIDE TOP PANEL (D) TO THE RIGHT SIDE BACK PANEL (F) THE RIGHT SIDE MIDDLE PANEL (I) THE RIGHT SIDE PANEL (G) AND THE FRONT PANEL (J) BY USING WOOD DOWEL (a) FIRST. ● TIGHTEN THE CAM LOCK BOLT (b) WITH THE CAM LOCK (c) FROM PRE-DRILLED HOLES. ● COVER THE CAM HOLES WITH PLASTIC COVER (d).
FIG 7 ● JOIN THE TWO ASSEMBLED BASE PARTS BY USING BOLT (e) THE BINDING SCREW (f) AND THE ALLEN WRENCH (k) FIRST.
