item # 100X XXX XXX Model # SP6849 USER MANUAL 36 in. Infrared Wall Mount Electric Fireplace Unit size: 19.85 in. h x 36 in. w x 5.98 in. d 21.72 in. h x 36 in. w x 11.4 in. d (with legs) QUESTIONS, PROBLEMS, MISSING PARTS? BEFORE RETURNING TO THE STORE, CALL HOME DECORATORS COLLECTION CUSTOMER SERVICE 8 A.M. - 7 P.M., EST, MONDAY - FRIDAY, 9 A.M. - 6 P.M., EST, SATURDAY 1-800-986-3460 HOMEDEPOT.
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 3-4 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Tools Required . . . . . . . . . . . . . . . . . . .
Important Safety Instructions Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at: 14. This appliance has hot and arcing or sparking parts inside. be used as a drying rack for clothing. Christmas stockings or decorations should not be hung in the area. 1-844-455-4621, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 15.
Important Safety Instructions (continued) ELECTRICAL CONNECTION □ This product is equipped with a polarized plug (one blade is wider than the other blade). To reduce the risk electrician. Warranty 1 Year Limited Warranty: The manufacturer warrants this product to be free from manufacturing and material defects for a period of one year from date of purchase, subject to the following conditions and limitations: 1.
Pre-Installation PLANNING ASSEMBLY □ Before you begin, locate the instructions and hardware. Be sure you have all of the parts and can identify them. □ □ Assembly of this product may require more than one person. TOOLS REQUIRED Philips Screwdriver Hand Drill PRODUCT SPECIFICATIONS Voltage 120 VAC, 60 Hz Amps 12.5 Amps Watts 1500 Watts HARDWARE INCLUDED WARNING: The included plastic wall anchors (BB) are intended for use with solid wall applications only (tile and concrete).
Pre-Installation (continued) PACKAGE CONTENTS D A B H G C F E I Part A B C D E F G H I Description Top Mounting Bracket Fireplace Heater directional bracket (optional) Front Glass Decorative crystals Bottom Mounting Bracket Left Foot Right Foot Remote Control 6 Quantity 1 1 1 1 1 1 1 1 1
Installation The Fireplace can be installed with 2 options: 1. Mount the unit on the wall.....Page 8 2. Freestanding.....Page 12 7 servicespi@sourceproinc.com Please contact 1-844-455-4621 for further assistance.
Installation - Wall Mount 1 Determine the desired location □ WARNING: direct sunlight and away from overhead lighting. WARNING: For safe operation choose a mounting location with at least 6 in. of clear space around the unit. 150 mm 6 in. 150 mm 6 in. 150 mm 6 in. 2 Mark the drill holes □ Use a level to align the top mounting bracket (A) and mark the holes with a pencil. A 9.84 in. 250 mm 9.84 in. 250 mm 9.84 in. 250 mm 35 mm 1.4 in. Minimun height 150 mm 6 in. F 8 14.1 in.
Installation - Wall Mount (continued) 3 Secure the top bracket to the wall □ Select the hardware best suited for your wall type and secure the top mounting bracket (A) to the wall. WARNING: Enclosed wall anchors (BB) only can be used on a concrete wall. BB STUD WALL: Secure the top mounting bracket (A) to the wall using the screws (AA) at the marked stud locations.
Installation - Wall Mount (continued) 4 Remove the front glass □ Remove the front glass (D) for easy installation.
Installation - Wall Mount (continued) B 6 □ B B A □ Select the hardware best suited for your wall type and secure the bottom bracket (F) to the wall. A WARNING: The enclosed wall anchors (BB) can be used on a concrete wall only. AA F STUD WALL: DRYWALL: CONCRETE WALL: Secure the bottom mounting Screw the wall anchors (not included) bracket (F) to the wall using the screws (AA) at the marked stud Secure the bottom mounting locations.
Installation - Freestanding 1 Remove the front glass and assemble the base □ Remove the front glass (D).
Installation - Freestanding (continued) 3 Put the crystals in and mount the front glass □ B CC E D 13 servicespi@sourceproinc.com Please contact 1-844-455-4621 for further assistance.
Operation Power Flame Heater Brightness Lock Timer Control Panel Power Flame Timer Heater Brightness I 14
Operation (continued) 1 2 Powering the Fireplace Adjusting the Temperature □ Push the Power button to supply power to all functions of □ The Heater button controls the heater ’s thermostat setting. □ Push the Power button again to turn off all functions. □ Press button to select the desired temperature. □ When the unit is in ON mode, the power icon indicator light is green. □ The thermostat setting range is 59°F (15°C) to 86°F (30°C), HI & OF (OFF).
Operation (continued) 5 □ □ 6 Adjusting the Flame and the Emberbed Colors Using the Child Lock feature □ When the unit is ON, hold the Lock button on the control panel for 3 seconds to activate the Child Lock function. E3 will colors. locked, and E3 will display when adjusting the temperature setting. settings: C5, C4, C3, C2 and C1. Setting C1 C2 C3 C4 C5 □ To deactivate the Child Lock function, hold the Lock o button for 3 seconds.
FCC/IC Information Please read and understand this entire manual before attempting to assemble, operate or install the product. This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Care and Maintenance (continued) NOTE: When the heater is not in use, the heater should be stored in a dry location, away from possible damage. The power cord should be stored properly to avoid contact with hot or sharp objects. Replacing the Remote Control Battery When the remote control stops operating or its range seems reduced, it is time to replace the batteries. 1. The battery compartment is located on the back end of the remote control. 2.
Troubleshooting Problem Corrective Action Check that the unit is plugged into a standard There is no power and the logs do not glow. The unit does not have power. 120 volt outlet. Then make sure power is set to the “ON” position. Unplug the unit and wait 5-10 minutes to The overheat protection device has been allow the sensor to reset itself. Plug the unit E1 displayed on the control panel. engaged. back in and turn on the heater. If the problem persists, call customer service.
