Item #000-000 Model #SW1422 USE AND CARE GUIDE DURANGO 52 INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-877-527-0313 HOMEDEPOT.
Table of Contents Operation .....................................................................13 Remote Control Operating Instructions...........................13 Reverse Function Button Operating Instructions ..............13 Installing the Remote Control Holder .............................14 Table of Contents ..........................................................2 Safety Information .........................................................2 Warranty ..............................................
Warranty We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of 15 years after the date of purchase by the original purchaser. We also warrant that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to actual size unless noted otherwise in the table below.
Pre-Installation (continued) PACKAGE CONTENTS D K E F L G A M H B N I J C Part Description O Description Quantity 5 Part I Light kit plate (preassembled) Quantity 1 A Blade B Mounting bracket 1 J 17-W LED assembly (preassembled) 1 C Canopy 1 K 1 D E Canopy cover Hanger ball (preassembled) 1 1 L M Glass shade Receiver F Downrod (preassembled) 1 G Couping cover 1 H Fan motor assembly 1 5 Remote control 1 1 N Remote control holder 1 O 12V Battery 1 HOMEDEPOT.
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock, or personal injury, mount the fan to an outlet box marked acceptable for fan support using the screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly — Attaching the Fan Blade 1 □ Attaching the fan blade to the fan assembly AA BB Attach the five fan blades (A) to the fan motor assembly (H) using the blade screws (AA) and fiber washers (BB), three for each blade. Tighten all screws securely. NOTE: When installing the blades, ensure the sides with “THIS SIDE UP” face the ceiling.
Assembly — Hanging the Fan (continued) 3 4 Attaching the downrod to the fan motor assembly Attaching the coupling cover, canopy cover, and canopy to the downrod □ Loosen the two set screws (JJ) from the fan motor assembly (H) coupling. □ Slip the coupling cover (G), canopy cover (D), and canopy (C) onto the downrod (F). □ Remove the hitch pin (GG) and lock pin (HH) from the downrod (F).
Assembly — Hanging the Fan (continued) 5 Hanging the fan motor assembly from the mounting bracket □ Lift the fan motor assembly (H) into position, and place the hanger ball (E) into the mounting bracket (B). Rotate the fan motor assembly (H) until the check groove drops into the registration slot (NN) and seats firmly. The downrod (F) should not rotate if this is done correctly.
Assembly — Hanging the Fan (continued) 7 Making the electrical connections 1 WARNING: To avoid possible electrical shock, ensure the electricity is turned off at the circuit breaker or main fuse box before wiring. WARNING: Check to see that all connections are tight, including the ground, and that no bare wire is visible at the wire nuts, except for the ground wire. Black White Black White Follow the steps below to connect the fan to your house supply wires.
Assembly — Hanging the Fan (continued) 8 Securing the fan motor assembly to the mounting bracket □ Remove one screw (KK) from the mounting bracket (B) and loosen the other screw (KK) approximately 1/4 turn. □ Carefully raise the canopy (C) up to the mounting bracket (B), and ensure the loosened screw (KK) is inserted into the key hole on the canopy (C). Rotate the canopy (C) clockwise.
Assembly — Installing the Light Kit 9 10 Installing the light kit plate CAUTION: To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan before installing the light kit. Installing the 17-W LED assembly and glass shade □ Connect the white wire from the fan motor assembly (H) to the white wire from the 17-W LED assembly (J). Connect the black wire from the fan motor assembly (H) to the black wire from the 17-W LED assembly (J).
Operation REMOTE CONTROL OPERATING INSTRUCTIONS Install a 12V battery (O) into the remote control (M). To prevent damage to the remote control, remove the battery if not used for long periods of time. M WARNING: Do not short-circuit, disassemble, heat up, connect improperly, or dispose of used batteries in fire. Do not recharge or mix batteries with used or other battery types. Immediately remove used batteries. Restore power to the ceiling fan and test for proper operation.
Operation (continued) INSTALLING THE REMOTE CONTROL HOLDER □ Attach the remote control holder (N) with the two remote control holder mounting screws (DD). N DD Care and Cleaning Do □ Do not Check the support connections, brackets, and blade attachments twice a year. Ensure they are secure. Because of the fan’s natural movement, some connections may become loose over time. It is not necessary to remove the fan from the ceiling. □ Clean your fan periodically.
Troubleshooting WARNING: Ensure the power is off at the electrical panel box before you attempt any repairs. Refer to the section “Making the Electrical Connections” on page 11. Problem The fan will not start. The fan sounds noisy. The remote control is not working. The fan wobbles. Solution □ Check main and branch circuit fuses or breakers. □ Check line wire connections to the fan and switch wire connections in the switch housing.
Service Parts AA H A GG HH I BB II J B K JJ CC C L D E F M DD KK EE LL FF MM N G O Description Part Description AA Blade screw BB Fiber washer G H Blade Mounting bracket Canopy Canopy cover Hanger ball Downrod Couping cover Fan motor assembly I Light kit plate II Hanger ball set screw J 17-W LED assembly JJ K Glass shade KK Fan motor assembly coupling set screw Mounting bracket screw L Receiver LL Fan motor assembly mounting ring screw M Remote control MM Ligh
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-877-527-0313 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
