Sth na DECORATORS Ll ere COLLECTION USE AND CARE GUIDE MERRY LED 52 INCH CEILING FAN EASY STEP-BY-STEP 3D INSTRUCTIONS Download the Free Interactive App TEE o Lina Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service p.m., EST, Monday-Friday, 9am. 6 p.m, EST, Saturday 1-800-986 3460 THANK YOU We appreciate the trust and confidence you have placed In Home Decorators Collection through the purchase of this ceiling fan.
Table of Contents Pr-installation, Specifications | Tools Required Hardware Included Package Contents, Installation Assembly Attaching the Fan Blades, Installing the LED assembly and glass shad: Operation, Care and Cleaning, Troubleshooting Service Parts
Safety Information READ AND SAVE THESE INSTRUCTIONS. WARNING: To reduce the risk of fire or electric shock, tix o To reduce the risk of electric shock, ensure electricity has fan should only bs side With an speed conical par! No.DLbeen muted off at the circuit breaker or fuse box before 1187RYS-0Z, manufactured Lid. beginning. o Al wiring must be in accordance with the National Electrical Carlo “EXPANSION 70-1999” and local electrical codes.
Warranty We warrant the fan motor to be fees from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. And we warrant the LED light kit to be fees from defects in workmanship and material present at time of shipment from the factory for a period of 5 years after the date of purchase by the original purchaser.
Pr-installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to acacia sis unless noted otherwise In the Table below.
Pr-Installation (continued) PACKAGE CONTENTS [Tr] Part Description Quantity Part Description Quantity A Blade 5 1 Light kit plate (reassembled) 1 B Mounting bracket 1 J 17W LED assembly {reassembled) 1 C Canopy 1 K Glass shade 1 D Canopy cover 1 L Receiver 1 E Hanger ball (reassembled) 1 M Remote control 1 F Down rod (reassembled) 1 N Re moats control holder 1 G Coupling cover 1 0 12V Battery 1 H Fan motor assembly 1 P Extension power cord used for longer 1 down rod longer down rod not included)
Installation MOUNTING OPTIONS 'WARNING: To traduce the risk of firs, electrical shook, or personal injury, mount the fan 1o an outlet box marked acceptably for fan support using the screws provided with the outlet box. An outset box commonly used for the support of lighting fixtures may not ba acceptable for fan support and may need to be replaced. If In doubt, consult a qualified electrician.
Assembly — Attaching the Fan Blade Attaching the fan blade to the fan assembly o Attach the five fan blades (A) to the fan motor assembly (H) using the blade screws (AA) and fiber washers (BB), three for each blade. Tighten all screws securely. NOTE: When installing th biases, ensure the shies with *THIS SIDE UP” face the ceiling.
Assembly — Hanging the Fan (continued) 3 o Attaching the down rod to the fan motor assembly Remove the hitch pin (GG) and lock pin (HH) from the down rod (F). Then, remove the hanger ball {E) from the down rod (F) by loosening the hanger ball set screw (I), and removing the cross pin (FF), then sliding the hanger ball (E} off of the down rod (F). Loosen the two set screws (JJ) from the fan motor assembly {H) coupling. Carefully feed the fan wires up through the down rod (F).
Assembly — Hanging the Fan (continued) 5 Hanging the fan motor assembly to the mounting bracket o Remove one screw (KK) from the mounting bracket {B) bat DO NOT discard It because kt will be used again In coming step. Loosen the other screw (KK) approximately 1/4 tum. o Lit the fan motor assembly (H) Into position, and place the hanger ball (E) Into the mounting bracket (B). Rotate the down rod (F) until the check groove (00) drops Into the registration slot (PF) and seats firmly.
Assembly — Hanging the Fan (continued) V4 Making the electrical connections 7 1 WARNING: To avoid possible electrical shock, ensure fhe A electricity Is fumed off at the circuit breaker ar main fuse box Ls before wiring, WARNING: Chock tn ses that all connections wre tight, A including the ground, and that rio bar wire is visibility af the wire nuts, except for the ground wire. Follow the steps below to connect the fan to your house supply wires.
Assembly — Hanging the Fan (continued) Securing the fan motor assembly to the mounting bracket Carefully reals the canopy (C} up to the mounting bracket (B), and ensure the loosened screw (KK) Is Inserted Into the key hole In the canopy (C). Rotate the canopy (C) clockwise. Secure the canopy (C) by replacing the screw (KK) previously removed and tightening the screw (KK) previously loosened. Place the canopy cover (D) on the canopy (C), and rotate the canopy cover (D) clockwise until it locks into position.
Assembly —Installing the LED Assembly and Glass Shade 10 Installing the LED assembly While holding the LED assembly (J) under your fan, firmly snap the wire connection plugs (RR) together. Position the LED assembly (J) on the light kit plate 1) and ensure the screw holes are properly aligned. Secure the LED assembly (J) by replacing the three screws (MM) previously removed. Tighten all S Crews securely.
Operation REMOTE CONTROL OPERATING INSTRUCTIONS Install a 12V battery (0) into the remote control (M). To prevent damage to the remote control, remove the battery if not used for long periods of time. WARNING: Dio not short-circuit, disassembles, heat up, nonnarcotic Improperly, or disposes of sad hatters In firs. No hat chargers or mix battles with Used or other battery Types. immediately remove used batteries. Restore power to the ceiling fan and test for proper operation.
Operation (continued) INSTALLING THE REMOTE CONTROL HOLDER oO Attach the remote control holder (N) with the two remote control holder mounting screws (DD). Care and Cleaning Do not Check the support connections, brackets, and blade attachments twice a year. Ensure they are secure. Because of the fan's natural movement, some connections may become loose over time. It Is not necessary to remove the fan from the selling. Clean your fan periodically.
Troubleshooting WARNING: Ensure the paws is off at the electrical A panel box before you attempt any repairs. Realer bo the section *Waking the Electrical Conn actions” on page 11. Problem Solution The fan will not start. o Check main and branch circuit fuses or breakers. o Check line wire connections to the fan and switch wire connections in the switch housing. o Check to make sure the dip switches from the remote contra! and receiver are set to the same frequency.
Service Parts Qaz 0 wm GG Bee BB T it sll i Fromm Pant | Description Part | Description A | Blade AA | Blade screw B | Mounting bracket BB | Fiber washer C | Canopy CC | Balance kit D | Canopy cover DD | Remote control holder mounting screws E | Hanger ball EE | Wire nuts F | Down rod FF | Cross pin G | Souping cover GG | Hitch pin H | Fan mayor assembly HH | Lock pin || Light kit plate Il | Hanger ball set screw J | KNOWLEDGE assembly JJ | Fan motor assembly coupling set screw K | Glass shade KK | Mounting
(01 DECORATORS sul nee Questions, problems, missing parts? Before resuming to the store, call Home Decorators Collection Customer Service 8a.m. 7 p.m. EST, Monday-Friday, 9a.m. 6 p.m., EST, Saturday 1-800-986 3460 Retain this manual for future use. Supplier's Declaration of Conformity 47 compliance Information Unique Identifier Trade name: HOME DECORATORS COLLECTION Model Number: CF552KR Responsible Party-U.S Contact Information Summer wind International, LLC.