Installation Guide

HOMEDEPOT.COM/HUBSPACE
Please contact 1-877-592-5233 for further assistance.
7
Remote Control (continued)
Setting lower shade limits
①
③
Long press [Channel setting]+[Down] buttons together for 4 seconds
to enter setting mode for the lower limit. The motor will jig and the
LED will light up.
Inch the blind by long pressing or short pressing the [Up] or [Down]
button to the desired lower limit position.
②
4S
Hold the [Channel setting] button for 4 seconds to complete defining
the lower limit. Note that action must be completed within 3 minutes
or the setting will time out.
Setting upper shade limits
①
Long press the [Channel setting]+[Up] buttons together for 4 seconds
to enter setting mode for the upper limit. The motor will jig and the
LED will light up.
Hold the [channel setting] button for 4 seconds to complete defining
the lower limit. Note that pairing mode will time out after 3 minutes
of inactivity
②
4S
Removing Existing Pairing
Long press motor [up] & [down] button together for 10 seconds. Motor will jitter, motor
LED will go out, all existing remote control pairings will be wiped on motor.
10s