Ships in 7-10 Days All Plywood Construction Soft Close Doors & Drawers Factory Built in the USA Limited Lifetime Warranty SPECIFICATION GUIDE SEMI-CUSTOM KITCHEN AND BATH CABINETRY hdckitchens.
Semi-Custom Kitchen & Bath Cabinetry Limited Lifetime Warranty Home Decorators Collection (warrantor) warrants to the original consumer purchaser, that all products manufactured or supplied by warrantor will be free from defects in material and workmanship. This warranty is for your lifetime as long as you own the cabinetry, on product used for Residential Purposes only and is not transferable to subsequent owners. Proof of Purchase is required.
Table of Contents Door Styles ....................................................................................................... 2-4 Cabinet Construction............................................................................................ 5 Customization Options.......................................................................................... 6 Wall Cabinets & Accessories............................................................................
Square Raised Panel with Applied Molding Door Styles Coventry Pacific White (CPW) Holden Bronze Glaze (HBG) - 2-3/8" wide x 3/4" thick solid MDF mortise and tenon framed doors with 5/8" thick solid MDF raised center panels and 1" wide applied mitered MDF accent molding - 2-3/8" wide x 3/4" thick solid MDF mortise and tenon framed doors with 5/8" thick solid MDF raised center panels and 1" wide applied mitered MDF accent molding - 2-3/8" wide x 3/4" thick solid MDF mortise and tenon framed drawer fronts
Square Raised Panel Miter Frame Door Styles Brookfield Pacific White (BPW) - 3/4" thick x 2¾" wide solid MDF ‘pillow top’ mitered framed doors with 5/8" thick solid MDF raised center panels - 3/4" thick x 2¾" wide solid MDF ‘pillow top’ mitered framed drawer fronts with 5/8" thick solid MDF raised center panels - 8" high drawer fronts feature a 2" wide mitered frame - Fully concealed hinges - Available in Pacific White painted finish - Decorative hardware required Lewiston Toffee Glaze (LTG) - 3/4" thick
Shaker Square Recessed Panel Door Styles Newport Pacific White (NPW) Tremont Pearl Gray (TPG) - 3/4" thick x 3" wide solid MDF Shaker style mortise and tenon framed doors with 5/8" thick solid MDF recessed center panels - 3/4" thick x 3" wide solid MDF Shaker style mortise and tenon framed doors with 5/8" thick solid MDF recessed center panels - 3/4" thick x 3" wide solid MDF Shaker style mortise and tenon framed drawer fronts with 5/8" thick solid MDF recessed center panels - 3/4" thick x 3" wide soli
Full Overlay Cabinet Construction 4 5 2 10 3 9 1 7 6 5 8 13 1 INTERIOR Light stained birch wood veneer provides a durable, wipe clean finish 2 FACE FRAME 1½" wide x 3/4" thick solid hardwood, doweled and joint-glued 3 END PANELS 1/2" thick CARB2 plywood with natural birch wood veneer interior and raw veneer exterior. EXPOSED SIDES REQUIRE FINISHED END PANELS. 4 FLOOR & CEILING 1/2" thick CARB2 plywood with natural birch wood veneer both sides captured by end panels.
Customization Options FACTORY FINISHED ENDS CUSTOM DEPTH - Cabinets are manufactured with an unfinished wood veneer exterior. Exposed sides (visible once installation is complete) require a color matched end panel. - Available on standard cabinet types in 1" depth increments CUSTOM DEPTH - Factory Finished Ends are available for all standard cabinets up to 90" tall - Specify Left Side, Right Side or Both - Finished Ends are wood veneer plywood, in a color matched stain.
Wall Cabinets 15" High Double Door WALL CABINET CODING STANDARD (12" DEEP) REFRIGERATOR (24" DEEP) W 30 30 W 36 24 18 Cabinet Code Cabinet Width Cabinet Height Cabinet Code Cabinet Width Cabinet Depth Cabinet Height ", 36" 30", 33 15" CUSTOM DEPTH W3015 W3315 W3615 · Standard wall cabinets are 12" deep. Refrigerator wall cabinets are 24" deep.
Wall Cabinets 18" High x 24" Deep Double Door " 30", 36 CUSTOM DEPTH DEPTH 1" 5", 18", 2 9", 12", 1 SPECIFY RIGHT or LEFT HINGED W302418 W362418 18" CUSTOM 30" High Single Door W0930 *W1230 *W1530 *W1830 W2130 30" 24" 12" - No adjustable shelf - Two adjustable shelves - Must be installed between two cabinets, cabinet and wall, or supported by refrigerator panels (RP) Mullion doors available in select styles. * Consult availability guide on page 14.
Wall Cabinets 30" High Double Door , 36" 0", 33" ", 3 24", 27 CUSTOM 30" High Wall Angle DEPTH *WA2430 *W2430 W2730 *W3030 W3330 *W3630 30" SPECIFY RIGHT 20" or LEFT HINGED Wall Corner Wall Corner 20" 20" 20" 12" - Two adjustable shelves - Two adjustable shelves Mullion doors available in select styles. * Consult availability guide on page 14. Mullion doors available in select styles. * Consult availability guide on page 14.
Wall Cabinets 36" and 42" High x 15" Deep Wall Angle 27" 36" or 42" WBCU2742 42" 23" 27" 27" DEPTH SPECIFY RIGHT or LEFT BLIND *WA271536 15" *WA271542 23" Wall Corner 15" 15" Blind Closure Panel 23" 36" 15" or 42" CUSTOM 24" SPECIFY 23" RIGHT or LEFT HINGED Wall Corner 27" 42" High Wall Blind Corner 15" 15" - Three adjustable shelves Mullion doors available in select styles. * Consult availability guide on page 14.
Wall Cabinets 12" Deep Wine Rack Range Hood Combo - Arched Valance WRHC36A WRX3018 30" - Available in 36" width " .38 17 - Includes Hood, Chimney, Hood Liner and Blower - Chimney is trimmable to adjust the height 9.69" " 31 able mm Tri - Blower is 390 CFM, 6.0 sones, enclosed light 19.32" 10.84" - Clearance of 3" on each side is recommended 38.31" - Matching interior and exterior standard - Must be installed between two cabinets or cabinet and wall 12" Deep Wall End Open Shelf " .
Wall Cabinets Fluted Fillers FF330 FF336 FF342 ¾" 1½" 15" Wide Wall Skin - 3/16" thick - Field installed - Matching veneer plywood exterior for wood finishes - BG, CB, CN, MG, TG - Matching painted MDF exterior for painted finishes - AW, PG, PW 36" 42" 30" 36" 42" - 3/4" thick solid wood - Face and all edges finished - May be trimmed 1/2" each side 1½" - Available in all styles except PG 3" 14¼" Angle Fluted Fillers ¾" AFF330 AFF342 1½" 24" Wide Wall Skin 45° 30" 42" 3" 135° 12" 15" 18" 2
Wall Cabinets Matching Wall End Panels MWEP30 MWEP36 MWEP42 Cabinet Fronts Only (CFO) Most Wall cabinets can be ordered as “Cabinet Fronts Only”. Face frame, doors, hinges and bumpers will be supplied and shipped loose. Please consult CFO availability guide on page 42.
Wall Cabinets Mullion Door A B MD1230 MD1530 MD1830 MD1236 MD1536 MD1836 A A A MD1242 MD1542 MD1842 A A B B A A A C A A C C Mullion Door Specification, Availability & Usage Guide MULLION DOOR SKU DIMENSIONS (inches) DESCRIPTION # OF LITES A B C MD1230 12x30 Mullion Door 6 8 29-11/16 11-11/16 W1230, W2430 (x2) All Styles Except HAW MD1530 15x30 Mullion Door 6 8 29-11/16 14-11/16 W1530, WA2430, W3030 (x2) All Styles Except HAW MD1830 18x30 Mullion Door 6 8 29-11/16
Base Cabinets 24" Deep Double Door BASE CABINET CODING CUSTOM " 33", 36 B 30 - 2T Cabinet Code Cabinet Width B33 B36 Customization (2ROTS) 34½" · · · · Standard Base Cabinets are 24" deep and 34½" high Desk Height base cabinets are 21" deep and 28½" high Cabinet depth does not include door thickness Products are available in all door styles unless stated otherwise · Standard cabinet exterior is unfinished veneer, exposed sides require Finished Ends or Matching End Panels 24" Deep Single Door 1" "
Base Cabinets 24" Deep Double Door with 1 Roll-Out Tray " 33", 36 24" B33-1T B36-1T 34½" 24" Deep Double Door with 2 Roll-Out Trays " 33", 36 24" 34½" 21½" 21½" - One full-depth adjustable shelf - One full width roll-out tray - Two full-depth roll-out trays 24" Deep Single Door with 2 Roll-Out Trays 1" ", 18", 2 12", 15 SPECIFY RIGHT or LEFT HINGED B12-2T B15-2T B18-2T B21-2T 24" 34½" 24" Deep Single Full Height Door 21" 15", 18", 9", 12", 24" DEPTH SPECIFY RIGHT or LEFT HINGED B09FH B12
Base Cabinets 24" Deep Base Single Wastebasket " 15", 18 24" B1WB15 B1WB18 24" Deep Base - 4 Drawers 36" CUSTOM DEPTH 24" BD36 - Basket slides on heavy duty, full extension runners - 35 quart capacity plastic basket is secured by epoxy coated white wire “cage” 34½" 34½" - White basket is removable 21½" - Basket dimensions: 14"W x 10"D x 18"H 21½" - SOFT CLOSE DOOR (SCD) OPTION NOT AVAILABLE - Two standard top drawers - Two deep drawers • CUSTOM DEPTH: 15" to 23" deep 24" Deep Base Double Wa
Base Cabinets Blind Base Corner Installation 24" Deep Sink Base Top View A C CUSTOM ", 30" 24", 27 DEPTH 24" SB24 SB27 SB30 Blind Base Cabinet 34½" 3" Filler Adjacent Base Cabinet Frame Opening 21½" - No shelf, false drawer front - May also be used as drop-in cooktop base • CUSTOM DEPTH: 9" to 23" deep BLIND BASE INSTALLATION GUIDE 24" Deep Blind Base Corner Deep Sink Base SILVER SERIES GOLD24" SERIES Cabinet 24" Opening " Space "A" Door 30Wall Min Max BBCU39 BBCU42 36" 42" 39" 45" Cabine
Base Cabinets 24" Deep Base Pantry Pullout 9", 12" 24" 24" Deep Base Cooktop - Single False Front BPPO9 BPPO12 30" 34½" BCT30 24" 34½" 21½" 21½" - Available in 9" & 12" width cabinets - Full extension ball bearing slides provide stable, smooth pullout function - Adjustable shelves with chrome rails 24" Deep Filler Pantry Pullout 24" Deep Base Cooktop - Double False Front BFPO3 BFPO6 3", 6" - Available in 3" & 6" widths with matching Filler Strip - Full extension ball bearing slides provide s
Base Cabinets 21" Deep Desk Knee Drawer Filler Strips 3" 4 DKD30 21" ¼" 26 FS30 FS630 4-7/8" " 28 NOTE: Full Extension Soft-Close Runner Not Available " 30 - 3/4" thick solid wood - Face and all edges finished 30" - One full width pencil/cosmetic drawer - Knee drawer is designed for use between two desk base cabinets - Comfortable height for dressing table or writing surface when installed at 28½" height with 1½" thick countertop 3" or 6" - Slab drawer front all door styles - May be trimmed up
Base Cabinets Base Skin 24" Deep End Panel with Filler BSK345 BEP1.
Base Cabinets Rollout Tray Kits Shelf Kits ",18",2 12",15 th = lf Wid¾" e h S –1 hed Finis net Width i b Ca 36" 0",33", 27",3 1",24", 5" 20" ROT12 ROT15 ROT18 ROT21 ROT24 ROT27 ROT30 ROT33 ROT36 215/8" SK1224 SK1524 SK1824 SK2124 SK2424 SK2724 SK3024 SK3324 SK3624 - 3/4" thick plywood faced with light birch veneer finish - Edgebanded on front edge - 5/8" solid wood dovetail construction - One shelf and set of clips per kit - Consult availability guide - Includes ¾ extension epoxy coated
Base Cabinets Spice Drawer Insert Knife Block Insert 4", 27" ", 21", 2 15", 18 ", 21" 15", 18 SDI15 SDI18 SDI21 SDI24 SDI27 - Solid hardwood drawer insert KBI15 KBI18 KBI21 - Solid hardwood drawer insert - One full width front utensil compartment - Three 5" high angled tiers - Rear 4" deep compartment - Sized to fit inside 15", 18", 21", 24", 27" wide drawers - Not for use in custom-depth cabinetry KBI15 - 10 knife slots + utensil compartment (fits B15, BD15) KBI18 - 13 knife slots + utensil compar
Base Cabinets Cabinet Fronts Only (CFO) Sink Base Liner Most Base cabinets can be ordered as “Cabinet Fronts Only”. Face frame, doors, drawer fronts, hinges, and bumpers will be supplied and shipped loose. In addition, plastic corner blocks will be supplied for false front installation requirements. 28½" or 34½" SBL2730 SBL3336 23¼" Please consult CFO availability guide on page 42.
Tall Cabinets CUSTOM 24" Deep Two Door Utility TALL CABINET CODING 18" U 24 24 84 DEPTH SPECIFY RIGHT or LEFT HINGED 24" U182496 42" Cabinet Code Cabinet Width Cabinet Depth - One fixed shelf dividing upper and lower doors, five adjustable shelves - Optional rollout trays or additional shelves available * Loose toe kick box for ease of installation Cabinet Height 96" · Standard Tall Cabinets are 24" deep · Add door thickness for total cabinet depth · Products are available in all door styles
Tall Cabinets 24" Deep Four Butt Door Utility 24" CUSTOM DEPTH 24" 24" Deep Two Door Utility with Four Rollout Trays 18" U242496 42" SPECIFY RIGHT or LEFT HINGED U182496-4T 24" - One fixed shelf dividing upper and lower doors, five adjustable shelves - One fixed shelf - Four repositionable, full width rollout trays - Two adjustable shelves * Loose toe kick box for ease of installation 42" - Optional rollout trays or additional shelves available 96" * Loose toe kick box for ease of installation
Tall Cabinets 24" Deep Four Butt Door Utility with Four Rollout Trays 24" 24" Deep Universal Oven U242496-4T 33" OC332496U 24" 24" - One fixed shelf dividing upper and lower doors 42" 96" * - Four repositionable, full width rollout trays - Two adjustable shelves * Loose toe kick box for ease of installation - Exposed sides require TSK96 - Factory finish ends not available 30" 96" * 21½" 21½" 24" Deep Universal Oven 33" - Consult chart for oven cutout dimensions - One adjustable shelf - 3 fie
Tall Cabinets Shelf Kits idth = elf W 1¾" h S d – he Finis et Width Cabin SK1824 SK2424 SK3324 215/8" - 3/4" thick plywood faced with light birch veneer finish - Edgebanded on front edge Tall Filler Strips FS84 FS90 FS96 FS696 ¾" 84" 90" 96" - 3/4" thick solid wood - One shelf and set of clips per kit - Face and all edges finished EXAMPLE: 18" wide tall cabinet uses Shelf Kit SK1824 3", 24" Deep Refrigerator Panel 6" Fluted Fillers RP84 RP90 RP96 ½" - 1½" & 3" wide fillers included - Panel
Tall Cabinets Tall V-Groove Skin TVGSK96 - 3/16" thick v-groove matching exterior - Grooves spaced 1¼" on center Cabinet Fronts Only (CFO) Most Tall cabinets can be ordered as "Cabinet Fronts Only". Face frame, doors, hinges and bumpers will be supplied and shipped loose. Please consult CFO availability guide on page 42.
Vanity Base Cabinets VANITY CABINET CODING 21" Deep Double Door Vanity Base " 33", 36 VSB 30 21 Cabinet Code Cabinet Width STANDARD 21" DEPTHS VB3321 VB3621 21" Cabinet Depth 34½" · Standard Vanity Base Cabinets are 21" deep and 34½" high CUSTOM · Cabinet depth does not include door thickness DEPTH · Custom Depths are available where indicated. Use Standard Base Cabinet coding to order as specified.
Vanity Base Cabinets 21" Deep Double Door Vanity Sink Base STANDARD 21" Deep Double Full Height Door Vanity Base 21" DEPTHS " 33", 36 3", 36" ", 30", 3 24", 27 VSB3321 VSB3621 21" STANDARD 21" 21" DEPTHS VB2421FH VB2721FH VB3021FH VB3321FH VB3621FH 34½" 34½" CUSTOM DEPTH CUSTOM DEPTH 18½" 18½" FOR CUSTOM DEPTHS FOR CUSTOM DEPTHS - No shelf, two false fronts · Order SB33 or SB36 · Select 9" to 23" depth 21" Deep Single Full Height Door Vanity Base 1" ", 18", 2 12", 15 21" SPECIFY RIGH
Vanity Linen & Wall Cabinets SPECIFY RIGHT or LEFT HINGED STANDARD 21" Deep Two Door Linen 18" 21" Deep Four Door Linen 24" 21" DEPTH 21" STANDARD 21" DEPTH 21" VLC242184 VLC182184 30" 30" 84" 84" 18½" 18½" CUSTOM CUSTOM DEPTH DEPTH FOR CUSTOM DEPTHS FOR CUSTOM DEPTHS · Order U182484 · Select 9" to 23" depth · Order U242484 · Select 9" to 23" depth - One fixed shelf dividing upper and lower doors, four adjustable shelves - One fixed shelf dividing upper and lower doors, four adjusta
Vanity Wall Cabinets Angle Fillers Filler Strips AF330 3" 4 45° 3" 135° 30" 30" 84" 3" 4 1/4" FS30 FS630 FS84 3" 4 - 3/4" thick solid wood - 3/4" thick solid wood - Face and all edges finished - Face and all edges finished - Available in all styles except PG Fluted Fillers FF330 3" or 6" Matching Toe Kick 8' MTK8 ¾" 1½" ¼" 8' 30" 4½" - 3/4" thick solid wood - Face and all edges finished - May be trimmed 1/2" each side 1½" - Available in all styles except PG - 1/4" thick wood ven
Molding Furniture Valance FV48 ¾" Scribe Molding SM8 48" ¼" 8' 5½" 5½" ¾" 5 1 8" - 3/4" thick solid wood - May be trimmed 3" on each end - 1/4" thick solid wood Valance VA48 ¾" Batten Molding BM8 48" 8' ¼" ¾" 3" - 3/4" thick solid wood - May be trimmed on each end - 1/4" thick solid wood Inside Corner Molding ICM8 8' Angle Crown Molding ¾" 25/8" 1 7/8" ¾" - 3/4" thick solid wood Outside Corner Molding - 3/4" thick solid wood - Use with TMMS8 for top of cabinet installation - A
Molding Classic Crown Molding CCM8 8' Beaded Light Rail BLR8 8' 2" 3 5/8" ¾" 1" 2¾" - 3/4" thick solid wood - Use with TMMS8 for top of cabinet installation - Available in all styles except PG and AW - 1" thick solid wood 3½" D 3½" W Top View Top Molding Mounting Strip TMMS8 8' Spindle SPL Mounting Strip 34½" ¾" 3½" D 3½" W Molding Top View 13/16" - 3/4" thick solid unfinished wood - Recommended for installation of ACM8, CM8, CCM8, SCM8 moldings - Solid hardwood 1¾" D 3½" W Top V
Decorative Hardware - Brushed steel - Euro railing pull - Brushed nickel - Brushed nickel - Features dual mounting hole options DH45-100 - 7" Euro Pull DH44-346 - 8" Square Bar Pull DH116-120 - 10" Quadra Pull 3¾" center (96mm) 7½" center (196mm) 5" inside center (128mm) 8-13/16" outside center (224mm) DH45-102 - 10" Euro Pull* 6-15/16" center (176mm) DH45-104 - 13" Euro Pull* DH44-348 - 9" Square Bar Pull 8-13/16" center (224mm) DH116-122 - 11" Quadra Pull DH44-350 - 13" Square Bar Pull* 6-5
Decorative Hardware DH43-826 DH43-630 - Elongated oval knob - Antique pewter - 2" length - Elongated oval knob - Oiled bronze - 2" length DH43-828 DH43-632 - Classic pull Antique pewter 3-3/4" center (96mm) 4-3/4" outside length - DH43-824 - 1" Backplate for DH43-828 - Antique pewter - 3¾" center (96mm) - 5¼" outside length Screw-head cup pull Antique pewter 2-1/2" center (64mm) 4-1/8" outside length DH99-188 - Round knob - Brushed nickel - 1-1/4" diameter DH99-128 - Contemporary bow pull Bru
Decorative Hardware DH65-432 DH65-200 - Birdcage knob - Stainless steel - 2-1/2" length - Birdcage knob - Antique iron - 2-1/2" length - Arrowhead knob - Antique pewter - 3-1/2" length DH65-120 DH65-402 - DH88-104 Birdcage pull Stainless steel 3-3/4" center (96mm) 4" outside length - DH95-144 Birdcage pull Antique iron 3-3/4" center (96mm) 4" outside length DH87-102 DH88-110 - Arrowhead pull Antique pewter 5" center (128mm) 7-1/2" outside length HDWE TEMPLATE-AW Hardware Drilling Template A
Cabinet Frame & Opening Dimensions 24" 30" 36" or 42" 27" 33" or 39" Wall Blind Wall Blind 9" 9" 3" 39
Cabinet Frame & Opening Dimensions NOTE: 96" TALL CABINETS ARE SUPPLIED WITH LOOSE TOE KICK BOX (EXPOSED SIDES REQUIRE TSK96) 40
Cabinet Frame & Opening Dimensions 21",24",27",30",or 33" 11/2" 131/2",15" 3" 131/2",15" 11/2" 6" Double Door Base 341/2" 2" 19" 11/2" 41/2" 24",27",30",33",36" NOTE: B27, B30 have full width drawers BBCU42 1 ½" 12" 9" BBCU39 1 ½" 1 ½" 9" 12" 9" 1 ½" 9" 1 ½" 6" 30" 19" 27" 30" 1 ½" 4 ½" 4 ½" 1 ½" 36" 30" DRAWER BOX INSIDE DIMENSIONS SHALLOW DRAWER CABINET HEIGHT DEPTH WIDTH B12, BD12 VB1221, VBD1221 B15, BBCU42, BD15 VB1521, VBD1521 DDO15, DDR15 B18, BD18 VB1821, VBD1821 B
Cabinet Fronts Only - Availability Guide - Most cabinets can be ordered as "Cabinet Fronts Only" (CFO) - Face frames, doors, hinges, and bumpers will be supplied and shipped loose - Doors are pre-drilled for hinge installation 42 CABINET CFO CABINET FRONT CABINET CFO CABINET FRONT W0930 W0936 W0942 W1230 W1236 W1242 W1530 W1536 W1542 W1830 W1836 W1842 W2130 W2136 W2142 W2430 W2436 W2442 W2730 W2736 W2742 W3012 W3015 W3018 W3024 W3030 W3036 CFOW0930 CFOW0936 CFOW0942 CFOW1230 CFOW1236 CFOW1242 CFOW153
Sketch 43
Notes 44
Notes 45
hdckitchens.