Ships in 7-10 Days All Plywood Construction Soft Close Doors & Drawers Factory Built in the USA Limited Lifetime Warranty SPECIFICATION GUIDE TRADITIONAL SEMI-CUSTOM KITCHEN AND BATH CABINETRY For use with 20/20 catalogs: HOME_DEC, HOME_DC2, HDSCPRO, HDSCPRO2 hdckitchens.
Semi-Custom Kitchen & Bath Cabinetry Limited Lifetime Warranty Home Decorators Collection (warrantor) warrants to the original consumer purchaser, that all products manufactured or supplied by warrantor will be free from defects in material and workmanship. This warranty is for your lifetime as long as you own the cabinetry, on product used for Residential Purposes only and is not transferable to subsequent owners. Proof of Purchase is required.
Table of Contents Door Styles ....................................................................................................... 2-4 Cabinet Construction............................................................................................ 5 Customization Options.......................................................................................... 6 Wall Cabinets................................................................................................... 8-22 Base Cabinets.............
Shaker Square Recessed Panel Door Styles Newport Pacific White (NPW) Tremont Pearl Gray (TPG) - 3/4" thick x 3" wide solid MDF Shaker style mortise and tenon framed doors with 5/8" thick solid MDF recessed center panels - 3/4" thick x 3" wide solid MDF Shaker style mortise and tenon framed doors with 5/8" thick solid MDF recessed center panels - 3/4" thick x 3" wide solid MDF Shaker style mortise and tenon framed drawer fronts with 5/8" thick solid MDF recessed center panels - 3/4" thick x 3" wide soli
Square Raised Panel Miter Frame Door Styles Brookfield Pacific White (BPW) Lewiston Toffee Glaze (LTG) - 3/4" thick x 2¾" wide solid MDF ‘pillow top’ mitered framed doors with 5/8" thick solid MDF raised center panels - 3/4" thick x 2¾" wide solid birch ‘pillow top’ mitered framed doors with 5/8" thick solid birch raised center panels - 3/4" thick x 2¾" wide solid MDF ‘pillow top’ mitered framed drawer fronts with 5/8" thick solid MDF raised center panels - 3/4" thick x 2¾" wide solid birch ‘pillow top
Square Raised Panel with Applied Molding Door Styles 4 Coventry Pacific White (CPW) Holden Bronze Glaze (HBG) - 2-3/8" wide x 3/4" thick solid MDF mortise and tenon framed doors with 5/8" thick solid MDF raised center panels and 1" wide applied mitered MDF accent molding - 2-3/8" wide x 3/4" thick solid MDF mortise and tenon framed doors with 5/8" thick solid MDF raised center panels and 1" wide applied mitered MDF accent molding - 2-3/8" wide x 3/4" thick solid MDF mortise and tenon framed drawer fro
Standard Cabinet Construction 4 5 2 10 3 INTERIOR Light stained birch wood veneer provides a durable, wipe clean finish 2 FACE FRAME 1½" wide x 3/4" thick solid hardwood, doweled and joint-glued 3 END PANELS 1/2" thick CARB2 plywood with natural birch wood veneer interior and raw veneer exterior. EXPOSED SIDES REQUIRE FINISHED END PANELS. 4 FLOOR & CEILING 1/2" thick CARB2 plywood with natural birch wood veneer both sides captured by end panels.
Customization Options FACTORY FINISHED ENDS Standard Ends Cabinets are manufactured with an unfinished wood veneer exterior. Exposed sides (visible once installation is complete) require a matching end. We have two choices listed: 1. Factory Finished Ends are available for all standard base, wall, and tall cabinets up to 90” tall. Specify Left Side, Right Side, or Both. Factory Finished Ends are 1/8” skins and are a color matched stained veneer or color matched painted veneer over an MDF core.
Matching Interior Options Wall Cabinets prepared for glass (PFG) Wall Cabinets with no doors (ND) Found on pages 13-16 Found on pages 17-20 - Wall cabinets traditional door frames will be routed and prepared for clear glass (PFG).
Wall Cabinets WALL CABINET CODING 15" High Double Door STANDARD (12" DEEP) REFRIGERATOR (24" DEEP) W 30 30 W 36 24 18 Cabinet Code Cabinet Width Cabinet Height Cabinet Code Cabinet Width Cabinet Depth DEPTH ", 36" 30", 33 Cabinet Height · All wall cabinets are 12" deep unless otherwise noted. Actual height of 24" high cabinets is 23½" overall. Refrigerator wall cabinets are 24" deep.
Wall Cabinets 18" High x 24" Deep Double Door ", 36" 24”, 30 18" CUSTOM 30" High Single Door DEPTH 1" 5", 18", 2 9", 12", 1 W242418 W302418 W362418 CUSTOM DEPTH SPECIFY RIGHT or LEFT HINGED W0930 W1230 W1530 W1830 W2130 30" 24" 12" - No adjustable shelf - Must be installed between two cabinets, cabinet and wall, or supported by refrigerator panels (RP) - Two adjustable shelves - CUSTOM DEPTH: 16" to 23" deep - CUSTOM DEPTH: 5" to 15" deep 24" High Double Door CUSTOM DEPTH " 30", 36 36"
Wall Cabinets 30" High Double Door CUSTOM 30" High Double Door with Pull Down Chrome Shelves DEPTH , 36" 0", 33" ", 3 24", 27 30" W2430 W2730 W3030 W3330 W3630 24" W2430-PDSCR - Field install at desired height in cabinet - Two tier chrome shelves lowers 10" and brings items forward 14¾" 30" - Gas assisted mechanism smoothly raises and lowers unit - Locking arm feature holds shelf in down position 12" 12" - Two adjustable shelves - CUSTOM DEPTH: 5" to 15" deep 36" High Double Door CUSTOM , 3
Wall Cabinets 30" High Double Door with Pull Down Frosted Shelves 30" High Wall Angle SPECIFY RIGHT or20" LEFT HINGED Wall Corner 24" W2430-PDSFR WA2430 Wall Corner - Field install at desired height in cabinet - Features 5 removable acrylic storage bins - Lowers items 10" and brings forward 14¾" - Gas assisted mechanism smoothly raises and lowers unit 30" 12" 20" 20" 20" - Two adjustable shelves - Clip corner back provides clearance for installation 36" High Double Door with Pull Down Frosted She
Wall Cabinets 36" and 42" High x 15" Deep Wall Angle SPECIFY RIGHT or LEFT HINGED Wall Corner 23" 27" 27" 42" High Wall Blind Corner 27" DEPTH WA271536 WA271542 15" SPECIFY RIGHT or LEFT BLIND WBCU2742 42" 23" Wall Corner 36" or 42" 23" 27" 15" Blind Closure Panel 15" 23" 36" 15" or 42" 15" 15" - Three adjustable shelves 15" - Clip corner back provides 15" clearance for installation 30" High Wall Blind Corner CUSTOM DEPTH 24" SPECIFY RIGHT or LEFT BLIND WBCU2730 - Three adjustabl
Wall Cabinets with Glass Doors WALL CABINET CODING 15" High Double Door STANDARD (12" DEEP) REFRIGERATOR (24" DEEP) W 30 30 W 36 24 18 Cabinet Code Cabinet Width Cabinet Height Cabinet Code Cabinet Width Cabinet Depth DEPTH ", 36" 30", 33 Cabinet Height · Standard wall cabinets are 12" deep. Refrigerator wall cabinets are 24" deep.
Wall Cabinets with Glass Doors 18" High x 24" Deep Double Door ", 36" 24”, 30 18" CUSTOM 30" High Single Door DEPTH 1" 5", 18", 2 9", 12", 1 W242418PFG W302418PFG W362418PFG DEPTH SPECIFY RIGHT or LEFT HINGED W0930PFG W1230PFG W1530PFG W1830PFG W2130PFG 30" 24" 12" - No adjustable shelf - Must be installed between two cabinets, cabinet and wall, or supported by refrigerator panels (RP) - Two adjustable shelves, matching cabinet finish - CUSTOM DEPTH: 16" to 23" deep - CUSTOM DEPTH: 5" to 15" d
Wall Cabinets with Glass Doors 30" High Double Door CUSTOM 30" High Wall Angle DEPTH 3", 36" 30", 3 ", 27", 24 30" SPECIFY RIGHT or LEFT HINGED Wall Corner W2430PFG W2730PFG W3030PFG W3330PFG W3630PFG 20" WA2430PFG Wall Corner 20" 20" 20" 12" - Two adjustable shelves, matching cabinet finish - Two adjustable shelves, matching cabinet finish - CUSTOM DEPTH: 5" to 15" deep - Clip corner back provides clearance for installation 36" High Double Door ", 30", 24", 27 CUSTOM " 33", 36 36"
Glass Wall Cabinets with Glass Doors 36" and 42" High x 15" Deep Wall Angle SPECIFY RIGHT or LEFT HINGED Wall Corner CUSTOM DEPTH 24" 23" WA271536PFG WA271542PFG 27" 27" 42" High Wall Blind Corner SPECIFY RIGHT or LEFT BLIND 15" WBCU2742PFG 42" 23" Wall Corner 36" or 42" 23" 27" 27" 15" Blind Closure Panel 15" 23" 36" 15" or 42" 15" 15" - Three adjustable shelves, matching cabinet finish 15" - Clip corner back provides 15" clearance for installation 30" High Wall Blind Corner CUSTOM
Wall Cabinets with No Doors WALL CABINET CODING 15" High No Door STANDARD (12" DEEP) REFRIGERATOR (24" DEEP) W 30 30 W 36 24 18 Cabinet Code Cabinet Width Cabinet Height Cabinet Code Cabinet Width Cabinet Depth DEPTH ", 36" 30", 33 Cabinet Height · Standard wall cabinets are 12" deep. Refrigerator wall cabinets are 24" deep.
Wall Cabinets with No Doors 18" High x 24" Deep No Door CUSTOM 30" High No Door DEPTH ", 36" 24”, 30 1" 5", 18", 2 9", 12", 1 W242418ND W302418ND W362418ND 18" 30" CUSTOM DEPTH W0930ND W1230ND W1530ND W1830ND W2130ND 24" 12" - No adjustable shelf - Must be installed between two cabinets, cabinet and wall, or supported by refrigerator panels (RP) - Two adjustable shelves, matching cabinet finish - CUSTOM DEPTH: 16" to 23" deep - CUSTOM DEPTH: 5" to 15" deep 24" High No Door CUSTOM " 30", 3
Wall Cabinets with No Doors 30" High No Door ", 30", 24", 27 CUSTOM " 33", 36 30" 30" High Wall Angle DEPTH WA2430ND Wall Corner W2430ND W2730ND W3030ND W3330ND W3630ND 20" Wall Corner 20" 20" 20" 12" - Two adjustable shelves, matching cabinet finish - Two adjustable shelves, matching cabinet finish - CUSTOM DEPTH: 5" to 15" deep - Clip corner back provides clearance for installation 36" High No Door ", 24", 27 CUSTOM ", 36" 30", 33 36" DEPTH 36" High Wall Angle WA2436ND W2436ND W
Wall Cabinets with No Doors 36" and 42" High x 15" Deep Wall Angle WA271536ND WA271542ND Wall Corner WBCU2742ND 42" 23" 27" 27" DEPTH SPECIFY RIGHT or LEFT BLIND 15" Wall Corner 23" 36" or 42" Blind Closure Panel 15" 15" 23" 36" or15" 42" - Clip corner back provides clearance for installation - 30" High Wall Blind Corner 36" High Wall Blind Corner 15" 15" - Three adjustable shelves, matching cabinet finish 15" 15" CUSTOM DEPTH 24" Three adjustable shelves, matching cabinet finish Indi
Wall Cabinets 12" Deep Wine Rack 15" Wide Wall Skin WRX3018 WSK1536 WSK1542 30" 36" 42" Vertical Grain - Matching interior and exterior standard - 3/4" thick solid wood “X” shelf - Must be installed between two cabinets or cabinet and wall Range Hood Combo - Straight Valance WSK2412 WSK2415 WSK2418 WSK2424 9.69" " 31 able mm Tri 19.32" 10.84" " .88 22 " 36 19" " .31 38 20.
Wall Cabinets Designer Tips Staggering Upper Cabinets Using the Wall Cabinet with accessories When using the 27" Deep corner cabinets, make sure to place a 3/4" filler next to adjacent cabinet if the adjacent cabinet is shallower. Also make sure to remember the finished skin for the deeper cabinet. Make sure to allow proper clearance on each side so doors can open 90 degrees or more. This will allow the interior accessory to pull down correctly.
Base Cabinets BASE CABINET CODING 24" Deep Double Door B 30 - 2T Cabinet Code Cabinet Width " 33", 36 DEPTH 24" B33 B36 Customization (2ROTS) · · · · Standard Base Cabinets are 24" deep and 34½" high Desk Height base cabinets are 21" deep and 28½" high Cabinet depth does not include door thickness Products are available in all door styles unless stated otherwise · Standard cabinet exterior is unfinished veneer, exposed sides require Finished Ends or Matching End Panels · Base cabinets are shipped
Base Cabinets 24" Deep Double Door with 1 Roll-Out Tray " 33", 36 24" Deep Double Door with 2 Roll-Out Trays B33-1T B36-1T 24" 34½" " 33", 36 B33-2T B36-2T 24" 34½" 21½" 21½" - One full-depth adjustable shelf - One full width roll-out tray - Two full-depth roll-out trays 24" Deep Single Door with 1 Chrome Roll-Out Tray 24" Deep Single Door with 2 Roll-Out Trays SPECIFY RIGHT or LEFT HINGED 1" ", 18", 2 12", 15 24" B12-2T B15-2T B18-2T B21-2T " 15", 18 SPECIFY RIGHT or LEFT HINGED 24" B15
Base Cabinets 24" Deep Single Door with 2 Chrome Roll-Out Trays " 15", 18 24" 24" Deep Double Door with 2-Tier Cookware Organizer SPECIFY RIGHT or LEFT HINGED 24" 24" B24-CWO B15-2WT B18-2WT 34½" 34½" 21½" 21½" - FIELD INSTALLED - Two full width chrome wire roll-out trays - Features Full-Extension runners - FIELD INSTALLED - Two chrome wire tiers operate independently - Adjustable dividers accommodate different size cookware 24" Deep Double Door with 2 Chrome Roll-Out Trays 24" Deep Single Ful
Base Cabinets 24" Deep Base Single Wastebasket " 15", 18 24" Deep Base - 4 Drawers B1WB15 B1WB18 24" 36" DEPTH 24" BD36 - Basket slides on heavy duty, full extension runners 34½" - 35 quart capacity plastic basket is secured by epoxy coated white wire “cage” 21½" 34½" - White basket is removable 21½" - Basket dimensions: 14"W x 10"D x 18"H - SOFT CLOSE DOOR (SCD) OPTION NOT AVAILABLE - Two standard top drawers - Two deep drawers - CUSTOM DEPTH: 15" to 23" deep 24" Deep Base Double Wastebaske
Base Cabinets 24" Deep Sink Base ", 30" 24", 27 CUSTOM 24" Deep Farm Sink Base DEPTH 24" CUSTOM 36" DEPTH 24" SB24 SB27 SB30 FSB36 13½" 34½" 34½" 21½" 21½" - No shelf, false drawer front - May also be used as drop-in cooktop base - CUSTOM DEPTH: 9" to 23" deep 24" Deep Sink Base " 33", 36 - Front rail is field modified to fit sink - No shelf - CUSTOM DEPTH: 9" to 23" deep CUSTOM DEPTH 24" Sink Front Angle FACE FRAME & DOOR SB33 SB36 SFA36 34½" CORNER FLOOR Min Max GOLD SERIES Wall
Base Cabinets 24" Deep Blind Base Corner CUSTOM DEPTH 24" 30" 24" Deep Blind Base Corner CUSTOM DEPTH 24" 36" SPECIFY RIGHT or LEFT BLIND SPECIFY RIGHT or LEFT BLIND BBCU39 34½" 21½" 21½" Blind Closure Panel - Indicate R or L for blind side (right shown) Cabinet can be pulled for exact fit (see installation chart) 3" filler & 1/8" blind closure panel included CUSTOM DEPTH: 9" to 23" deep 33" and 36" Easy Reach - Blind Closure Panel Indicate R or L for blind side (right shown) Cabinet ca
Base Cabinets 24" Deep Filler Pantry Pullout 24" Deep Fluted Filler Pantry Pullout BFPO3 BFPO6 3", 6" - Available in 3" & 6" widths with matching Filler Strip - Full extension ball bearing slides provide stable, smooth pullout function - Adjustable shelves with chrome rails - Pull-out unit must be installed between two cabinets - Filler strip attached to pull-out unit after installation 30" 21½" 24" Deep End Panel with Filler 3" only - Available in 3" width only with matching Fluted Filler Strip -
Base Cabinets with No Doors BASE CABINET CODING 24" Deep Single Full Height No Door 21" 15", 18", 9", 12", B 30 - 2T Cabinet Code Cabinet Width DEPTH 24" Customization (2ROTS) 34½" · Standard Base Cabinets are 24" deep and 34½" high · Standard cabinet exterior is unfinished veneer, exposed sides require Finished Ends or Matching End Panels · Matching interiors are standard in base cabinets with no doors · Base cabinets are shipped with an unfinished toekick.
Base Cabinets Design Tips Designing Around a Range Clearance for Roll Out Trays Make sure to give landing space on each side of a cooking appliance when placing in design. Be sure to leave enough clearance for doors to open at least 90 degrees. This will allow the roll out trays to be operated correctly.
Tall Cabinets TALL CABINET CODING 24" Deep Two Door Utility CUSTOM DEPTH 18" U 24 24 84 SPECIFY RIGHT or LEFT HINGED 24" U182496 42" Cabinet Code Cabinet Width Cabinet Depth Cabinet Height - One fixed shelf dividing upper and lower doors, five adjustable shelves - Optional rollout trays or additional shelves available * Loose toe kick box for ease of installation 96" · Standard Tall Cabinets are 24" deep · Add door thickness for total cabinet depth · Products are available in all door styles
Tall Cabinets 24" Deep Two Door Utility with Four Rollout Trays 18" 24" SPECIFY RIGHT or LEFT HINGED 24" Deep Four Butt Door Utility with Four Rollout Trays 24" U242484-4T 24" U182484-4T 30" 30" - One fixed shelf dividing upper and lower doors - Four repositionable, full width rollout trays 84" 84" - Four repositionable, full width rollout trays - One adjustable shelf - Exposed sides require TSK84 - One adjustable shelf - Exposed sides require TSK84 21½" 21½" 24" Deep Two Door Utility with Fo
Tall Cabinets 24" Deep Two Door Utility with Four Pull-out Chrome Trays 18" 24" Deep Universal Oven SPECIFY RIGHT or LEFT HINGED 84" 24" Deep Two Door Utility with Four Pull-out Chrome Trays 18" SPECIFY RIGHT or LEFT HINGED - FIELD INSTALLED PULL-OUT UNIT - Pull-out unit includes 4 chrome baskets and optional door mounts - Top and bottom glides are soft closing and 250 lb.
Tall Cabinets 24" Deep Refrigerator Panel with Filler ½" 30" Deep Universal Refrigerator Panel with Filler RP84 RP90 RP96 ½" RP3096 30" - 1½" and 3" wide fillers included - Panel and Fillers supplied loose for field assembly - 1½" and 3" wide fillers included - Panel and Fillers supplied loose for field assembly - Reversible, may be installed left or right - Reversible, may be installed left or right - Trimmable for 84" and 90" applications - 1/2" thick veneer matching exterior/interior - 1/2" t
Tall Cabinets with Glass Doors TALL CABINET CODING 24" Deep Four Butt Door Utility with Four Rollout Trays 24" U 24 24 84 24" 30" Cabinet Code Cabinet Width Cabinet Depth Cabinet Height · Standard Tall Cabinets are 24" deep 84" · Not available in Hallmark Arctic Whie · Standard cabinet exterior is unfinished veneer, exposed sides require Finished Ends · Clear glass ships separate from cabinets · Matching interiors are standard in PFG cabinets 21½" · Soft close hinges 24" Deep Four Butt Door Uti
Glass Tall Cabinets with Glass Doors 24" Deep Universal Oven 33" 24" Deep Two Door Utility OC332484PFGU 18" 24" 18" 84" 21½" - Top door is glass - Consult chart for oven cutout dimensions - No adjustable shelf - 3 field removable drawers - 3" stiles in oven compartment - Exposed sides require TSK84 - For frame openings refer to page 60 CABINET MIN. CUTOUT WIDTH MAX CUTOUT WIDTH MIN.
Tall Cabinets with Glass Doors 24" Deep Two Door Utility with Four Rollout Trays 18" 24" SPECIFY RIGHT or LEFT HINGED 24" Deep Two Door Utility with Four Pull-out Chrome Trays 18" U182484PFG-4T 30" - Top door is glass with matching cabinet interior throughout - FIELD INSTALLED PULLOUT UNIT - Pull-out unit includes 4 chrome baskets and optional door mounts - Top and bottom glides are soft closing and 250 lb.
Tall Cabinets with No Door TALL CABINET CODING 24" Deep No Door Utility 24" U 24 24 84 CUSTOM DEPTH 24" U242484ND 30" Cabinet Code Cabinet Width Cabinet Depth - One fixed shelf dividing upper and lower section, four adjustable shelves Cabinet Height - Exposed sides require TSK84 - TSK90 84" · Standard Tall Cabinets are 24" deep - CUSTOM DEPTH: 9" to 23" deep · Standard cabinet exterior is unfinished veneer, exposed sides require Finished Ends · Matching interiors are standard in tall cabinet
Tall Cabinets Design Tips Decorative Ends for Tall Cabinets Clearance for Roll Out Trays For decorative ends on a tall 24" deep cabinet use a CFOU and a tall skin. Customizing the Depth of a Tall Cabinet Customize the depth of a 24” wide utility cabinet (U242484, U242490, or U242496) down to 12” and use it facing out next to a refrigerator or another utility cabinet for shallow food storage, storing brooms/mops, or create a hidden message center.
Vanity & Desk Cabinets VANITY CABINET CODING 21" Deep Double Door Vanity Base " 33", 36 STANDARD 21" 21" DEPTHS VSB 30 21 Cabinet Code Cabinet Width VB3321 VB3621 Cabinet Depth 34½" · Standard Vanity Base Cabinets are 21" deep and 34½" high CUSTOM DEPTH · Cabinet depth does not include door thickness · Custom Depths are available where indicated. Use Standard Base Cabinet coding to order as specified.
Vanity & Desk Cabinets 21" Deep Double Door Vanity Sink Base 21" Deep Double Full Height Door Vanity Base STANDARD " 33", 36 21" 3", 36" ", 30", 3 24", 27 21" DEPTHS VSB3321 VSB3621 STANDARD 21" VB2421FH VB2721FH VB3021FH VB3321FH VB3621FH 34½" 34½" CUSTOM DEPTH CUSTOM DEPTH 18½" 18½" FOR CUSTOM DEPTHS FOR CUSTOM DEPTHS - No shelf, two false fronts · Order SB33 or SB36 · Select 9" to 23" depth 21" Deep Single Full Height Door Vanity Base 1" ", 18", 2 12", 15 21" · Order B24FH, B27FH,
Vanity & Desk Cabinets 21" Deep Desk Knee Drawer Vanity Base Skin DKD30 21" ¼" 26 VBSK345 4-7/8" - 1/8" thick - Field modified and installed - Matching veneer plywood exterior for wood finishes - BG, CB, CN, MG, TG - Matching painted MDF exterior for painted finishes - AW, PG, PW " 28 NOTE: Full Extension Soft-Close Runner Not Available " 30 34½" - One full width pencil/cosmetic drawer - Knee drawer is designed for use between two desk base cabinets - Comfortable height for dressing table or wri
Vanity Cabinets with No Door VANITY CABINET CODING 21" Deep Double Full Height Door Vanity Base 3", 36" ", 30", 3 24", 27 VSB 30 21 Cabinet Code Cabinet Width Cabinet Depth · Standard Vanity Base Cabinets are 21" deep and 34½" high 34½" · Matching interiors are standard in vanity cabinets with no doors · Custom Depths are available where indicated. Use Standard Base Cabinet coding to order as specified.
Vanity Linen Cabinets 21" Deep Two Door Linen 21" Deep Four Door Linen STANDARD SPECIFY RIGHT or LEFT HINGED STANDARD 18" 21" DEPTH 21" DEPTH 21" 24" VLC242184 21" VLC182184 30" 30" 84" 84" 18½" CUSTOM 18½" DEPTH FOR CUSTOM DEPTHS · Order U182484 · Select 9" to 23" depth CUSTOM DEPTH Note: Roll out trays not available for Vanity Linen Cabinets or reduced depth cabinets.
Vanity Linen Cabinets with Glass Doors VANITY CABINET CODING 21" Deep Four Door Linen STANDARD 21" DEPTH VLC 30 21 Cabinet Code Cabinet Width 24" VLC242184PFG 21" Cabinet Depth 30" · Standard Vanity Cabinets are 21" deeP · Cabinet depth does not include door thickness · Custom Depths are available where indicated. Use Standard Base Cabinet coding to order as specified.
Vanity Linen Cabinets with No Doors VANITY CABINET CODING 21" Deep Four Door Linen STANDARD 21" DEPTH VLC 30 21 Cabinet Code Cabinet Width 24" VLC242184ND 21" Cabinet Depth 30" · Standard Vanity Linen Cabinets are 21" deep · Custom Depths are available where indicated. Use Standard Base Cabinet coding to order as specified.
Accessories Spice Drawer Insert Knife Block Insert 4", 27" ", 21", 2 15", 18 ", 21" 15", 18 SDI15 SDI18 SDI21 SDI24 SDI27 - Solid hardwood drawer insert KBI15 KBI18 KBI21 - Solid hardwood drawer insert - One full width front utensil compartment - Three 5" high angled tiers - Rear 4" deep compartment KBI15: 10 knife slots + utensil compartment (fits B15, BD15) KBI18: 13 knife slots + utensil compartment (fits B18, BD18, B36, BD36) KBI21: 16 knife slots + utensil compartment (fits B21) - Sized to fi
Accessories Rollout Tray Kits 1 Base Cabinet Shelf Kits 6" ",33",3 27",30 1",24", 18",2 2",15", 5" 20" ROT12 ROT18 ROT24 ROT15 ROT21 ROT27 ROT30 ROT36 ROT33 NOTE: Roll out trays not available for Vanity Linen Cabinets or reduced depth cabinets. NOTE: The roll out trays are natural birch in color and will not be color matched if added to a PFG or No door cabinet with matching interior.
Accessories Matching Interior Base Cabinet Shelf Kits SK1224MI SK2124MI SK1524MI SK2424MI SK1824MI SK2724MI Matching Interior Wall Cabinet Shelf Kits SK2112MI SK2412MI SK2712MI SK1212MI SK1512MI SK1812MI SK3024MI SK3324MI SK3624MI - Shelf kits match face frame and door - Shelf kits match face frame and door - 3/4" Thick plywood faced with light birch veneer finish - 3/4" thick plywood - Edgebanded on front edge - Edgebanded on front edge - One shelf and set of clips per kit - One shelf and set o
Accessories Cabinet Fronts Only (CFO) Matching Wall End Panels MWEP30 MWEP36 MWEP42 Most Wall cabinets can be ordered as “Cabinet Fronts Only”. Face frame, doors, hinges and bumpers will be supplied and shipped loose. Please consult CFO availability guide on page 62.
Accessories U-Shaped Tray Divider 3" - Chrome Sink Base Liner 28½" or 34½" USTD3-CR SBL2730 SBL3336 23¼" 9 7�8" 11¾" - Helps protect sink cabinet from damage due to leaks in piping or drains - Sleek surface for easy cleanup - SBL2730 can be trimmed to fit SB27 or SB30 - SBL3336 can be trimmed to fit SB33 or SB36 - Field installed - Grey polystyrene easy to clean surface - Not for use in custom-depth cabinetry 3" - Bakeware Organizer Use 2 or more to organize cabinet Can be used in base or wall cabin
Accessories Filler Strips FS30 FS36 FS42 FS84 FS630 FS636 FS642 - 3/4" thick solid wood - Face and all edges finished Tall Filler Strips ¾" FS84 FS90 FS96 FS696 - 3/4" thick solid wood 84" 90" 96" - Face and all edges finished 3", 6" Angle Fillers ¾" 3" 135° 30" AF330 AF342 45° 3" - 3/4" thick solid wood - Face and all edges finished - Available in all styles except PG 4¼" 53
Molding Furniture Valance ¾" FV48 Scribe Molding SM8 48" ¼" 8' 5½" 5½" ¾" 5 1 8" - 3/4" thick solid wood - May be trimmed 3" on each end - 1/4" thick solid wood Valance ¾" VA48 BM8 Batten Molding 48" 8' ¼" ¾" 3" - 3/4" thick solid wood - May be trimmed on each end - 1/4" thick solid wood Inside Corner Molding ICM8 Angle Crown Molding ACM8 8' 8' ¾" 25/8" 1 7/8" ¾" - 3/4" thick solid wood Outside Corner Molding - 3/4" thick solid wood - Use with TMMS8 for top of cabinet instal
Molding Classic Crown Molding CCM8 Beaded Light Rail 8' BLR8 8' 2" 3 5/8" ¾" 1" 2¾" - 3/4" thick solid wood - Use with TMMS8 for top of cabinet installation - Available in all styles except PG and AW - 1" thick solid wood 3½" D 3½" W Top View TMMS8 Top Molding Mounting Strip 8' SPL Spindle Mounting Strip 34½" ¾" 3½" D 3½" W Molding Top View 1 /16" - 3/4" thick solid unfinished wood - Recommended for installation of ACM8, CM8, CCM8, SCM8 moldings 3 - Solid hardwood 1¾" D 3½" W Top
Decorative Hardware - Brushed steel - Euro railing pull - Brushed nickel - Brushed nickel - Features dual mounting hole options DH45-100 - 7" Euro Pull DH44-346 - 8" Square Bar Pull DH116-120 - 10" Quadra Pull 3¾" center (96mm) 7½" center (196mm) 5" inside center (128mm) 8-13/16" outside center (224mm) DH45-102 - 10" Euro Pull* 6-15/16" center (176mm) DH45-104 - 13" Euro Pull* DH44-348 - 9" Square Bar Pull 8-13/16" center (224mm) DH116-122 - 11" Quadra Pull DH44-350 - 13" Square Bar Pull* 6-5
Decorative Hardware DH43-826 DH43-630 - Elongated oval knob - Antique pewter - 2" length - Elongated oval knob - Oiled bronze - 2" length DH43-828 DH43-632 - Classic pull Antique pewter 3-3/4" center (96mm) 4-3/4" outside length - DH43-824 - 1" Backplate for DH43-828 - Antique pewter - 3¾" center (96mm) - 5¼" outside length Screw-head cup pull Antique pewter 2-1/2" center (64mm) 4-1/8" outside length NOTE: The cup pulls can only be used on shaker door styles DH99-188 - Round knob - Brushed nick
Decorative Hardware DH65-200 DH88-104 - Birdcage knob - Antique iron - 2-1/2" length - Arrowhead knob - Antique pewter - 3-1/2" length DH65-120 - DH88-110 Birdcage pull Antique iron 3-3/4" center (96mm) 4" outside length DH95-144 - DH87-102 Arrowhead pull Antique pewter 5" center (128mm) 7-1/2" outside length HDWE TEMPLATE-AW Hardware Drilling Template Align with door frame to quickly and accurately mark hole locations.
Cabinet Frame & Opening Dimensions 24" 30" 36" or 42" 27" 33" or 39" Wall Blind Wall Blind 9" 9" 3" 59
Cabinet Frame & Opening Dimensions NOTE: 96" TALL CABINETS ARE SUPPLIED WITH LOOSE TOE KICK BOX (EXPOSED SIDES REQUIRE TSK96) 60
Cabinet Frame & Opening Dimensions 21",24",27",30",or 33" 11/2" 131/2",15" 3" 131/2",15" 11/2" 6" 1 ½” 2" 13 ½” 30” Double Door Base 341/2" FSB36 1 ½” 19" 15” 11/2" 1 ½” 41/2" 36” 24",27",30",33",36" NOTE: B27, B30 have full width drawers BBCU42 1 ½" 12" 9" BBCU39 1 ½" 1 ½" 9" 12" 9" 1 ½" 9" 1 ½" 6" 30" 19" 27" 30" 1 ½" 4 ½" 4 ½" 36" 1 ½" 30" DRAWER BOX INSIDE DIMENSIONS SHALLOW DRAWER CABINET HEIGHT DEPTH WIDTH B12, BD12 VB1221, VBD1221 B15, BBCU42, BD15 VB1521, VBD
CFO - Cabinet Fronts Only - Availability Guide - Most cabinets can be ordered as "Cabinet Fronts Only" (CFO) - Face frames, doors, hinges, and bumpers will be supplied and shipped loose - Doors are pre-drilled for hinge installation - In addition, plastic corner blocks will be supplied for false front installation requirements CABINET 62 W0930 W0936 W0942 W1230 W1236 W1242 W1530 W1536 W1542 W1830 W1836 W1842 W2130 W2136 W2142 W2412 W2418 W2430 W2436 W2442 W2730 W2736 W2742 W3012 W3015 W3018 W3024 W3030 W
Sketch 63
hdckitchens.
