Use and Care Manual

5 HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Operation

Identifying the control panel

Understanding the function indicator

□ The control panel is located on the top left corner of

the fireplace/heater unit.

□ The control panel contains the display unit (1),

function indicator (2), timer function (3), heater

control (4), flames control (5), and main power (6).

□ The display unit (1) displays information about the

flame level, timer, and current temperature.

□ The function indicator (2) has three square LEDs – red,

green, and blue. The red LED indicates that the

Fahrenheit temperature heating function is running, the

green LED indicates that the Celsius temperature heating

function is running, and the blue LED indicates that the

timer function is engaged.

□ To the right of the three LEDs, is the infrared receiver

module which communicates with the remote control to

control the heater.

Using the timer function

□ The timer button (3) allows you to set the amount of time you want the fireplace/heater to run. The timer button (3)

operates both the flames and the heater function. If the heater is operating when the timer is set, then the heater is on the

timer. If the flames are operating, then the timer will control the flames. If both the heater and flames are operating with

the timer set, then the timer controls both the flames and the heater. Pressing the button in sequence will set the timer for

a set interval. This interval period is shown in the display (1), in blue. The set intervals are displayed in this table. The

timer interval is set from the time the interval is selected. There is no clock function for turning the heater or flames on or

off at a specific time.

Button Press Timer Interval Display

1st press 30 Minutes 30

2nd press

1 Hour

3rd press 2 Hours 2h

4th

press

3 Hours

5th press 4 Hours 4h

6th press 5 Hours 5h

7th press

6 Hours

8th press OFF None