Use and Care Manual

8
Using the Remote Control (continued)
2
Battery Replacement
NOTE: Do not mix old and new batteries.
Do not mix alkaline, standard (carbon zinc), or rechargeable (nicad, nimh, etc.) batteries.
3
Using the remote control
□ The operation of the remote control buttons works
the same as the buttons on the front panel of the
fireplace/heater. Review the Operation section for
more information on the functionality of these
buttons.
NOTE: The remote control cannot lock/unlock
the flame and heating function, and it cannot
switch between Fahrenheit and Celsius .
Heater Up
Main Power
Heater
Control
Flames Control
Timer Control
Heater Down
WARNING:
Do not ingest batteries.
1. Non-rechargeable batteries are not to be recharged.
2. Batteries are to be inserted with the correct polarity.
3. Exhausted batteries are to be removed from the product.
4. Always purchase the correct size and grade of battery most suitable
for the intended use.
5. Replace all batteries of a set at the same time.
6. Clean the battery contacts and also those of the device prior to battery
installation.
7. Remove batteries from equipment with is not to be used for an extended
period of time.
NOTE:
Battery disposal
Please always dispose of batteries
at a suitable recycling point.