Instructions / Assembly

Attaching the light kit mounting

plate to the mounting ring

□ Remove one of the three light kit mounting plate

screws (KK) from the mounting ring (YY) and loosen

the other two screws (KK). (Do not remove)

□ Place the key holes in the light kit mounting plate (J)

over the two screws (KK) previously loosened from

the mounting ring (YY), and turn the light kit

mounting plate (J) until the light kit mounting plate

(J) locks in place at the narrow section of the key

holes.

□ Securely tighten the two light kit mounting plate

screws (KK) previously loosened and the one

previously removed.

CAUTION: Before starting installation, disconnect the

power by turning off the circuit breaker or removing the fuse

at the fuse box. Turning power off using the fan switch is not

sufﬁcient to prevent electric shock.

Assembly — Installing the Light Kit Assembly

Attaching the light kit assembly to

the light kit mounting plate

□ While holding the light kit assembly (K) under the fan

motor assembly (G), snap together the wire

connection plugs (ZZ).

□ Carefully push all wires back into the switch housing.

Install the light kit assembly (K) onto the light kit

mounting plate (J) with the three light kit mounting

screws (LL) provided. Be sure to tighten all screws.

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.