Instructions / Assembly

□ Install 2 x 7 Watt LED medium base bulbs (MM).

□ Restore power and your light kit is ready for

operation.

Installing the bulbs

CAUTION: Before starting installation, disconnect the

power by turning off the circuit breaker or removing the fuse

at the fuse box. Turning power off using the fan switch is not

sufﬁcient to prevent electric shock.

Installing the fan without the

light kit (optional)

Assembly — Installing the Light Kit Assembly (continued)

CAUTION: Before starting installation, disconnect the

power by turning off the circuit breaker or removing the fuse

at the fuse box. Turning power off using the fan switch is not

sufﬁcient to prevent electric shock.

□ Disassemble the switch housing (AAA) from the light

kit assembly (K). You can keep the light kit for future

use.

□ While holding the switch housing (AAA) under the fan,

snap together the wire connection plugs (ZZ).

□ Attach the plastic plug (JJ) to the switch housing

(AAA).

□ Install the switch housing (AAA) to the light kit

mounting plate (J) with light kit mounting screws (LL)

provided.

AAA