Network Router User Manual

Dynamix DW 3512 Technical Manual V1.00

servers exist in your Office LAN and your PCs may get IP from a wrong DHCP server.

¾ Step5: Please renew the IP settings of the PC which connect with the LAN port of 3512. Then

the PC should get new IP from the DHCP server which connected with your Office LAN.

¾ Step6: Go to the page of WirelessÆ Basic Settings, set the mode to AP. Please also change

the SSID to another name if necessary.

¾ Step7: We strongly suggest user also go to the page of WirelessÆ Security, set the

Encryption type and other necessary settings.

¾ Step8: At this time, a station could be able to search the DW3512 by WiFi, and that station

should be able to access Internet via DW3512.

Client (Infrastructure)

If Client (Infrastructure) is enabled, the DW3512 can work like a wireless station when it’s connected to a

computer so that the computer can send packets from wired to wireless interface. Below is an example to

show you how to implement Client (infrastructure) mode.

DW3512-A (AP mode)

DW3512-B (Client m

with Infrastr

ode

ucture)

LAN IP: 192.168.123.200

LAN IP: 192.168.123.123

LAN

WLAN

Internet

PC connected with LAN

port of DW3512

-B

ADSL/ Cable Modem

In DW3512-A, it is working as Acce

ss point with NAT.

In DW3512-B, it is working as Client mode with Infras

tructure. The configure steps is as below.

¾ St

ep1: Power on DW3512-B and set one pc to connect with DW3512-B. Set PC to a Fixed IP,

such as 192.168.123.100.

¾ Step2: Enter 192.168.123.123 for the WEB interface of DW3512-B with no login ID and

password.

¾ Step3: Go to the page of Operation, set DW3512 to Bridge mode. In this mode, all Ethernet

ports and wireless interface are bridged together and NAT function is disabled. All the WAN

related function and firewall are not supported.

¾ Step4: When Bridge mode is enabled, the WAN configuration is disabled, so please go to the