Installation Guide

ManualsBrandsHOME-FLEX ManualsFittings1-1/2 in. IPS Poly DR 11 to 1-1/2 in. MIP Underground Meter Riser Bent

Table Of Contents

Part Number

Size

(IPS)

SDR

Dimensions (in)

Weight

(lbs)

S D H G L

18-406-010 1" 11 0.63 2.68 3.78 1.69 7.44 0.86

18-406-012 1¼" 11 0.79 3.23 4.41 1.89 8.78 1.46

18-406-015 1½" 11 0.83 3.78 4.88 2.17 9.65 2.16

18-406-020 2" 11 0.94 4.45 5.59 2.72 11.1 3.33

Check homeexunderground.com for up-to-date product listings.

2.3 Transition Fittings

• Transitions between Steel and MDPE Gas Pipe

• Requires the use of a Coupling Fitting

• Complies with ASTM F1973 for use with ASTM D2513 Gas Pipe

• Suitable for Natural Gas or LP Gas

• Maximum Operating Pressure: 80 PSIG

• Operating Temperature Range: 0°F - 140°F

Note: The steel portion of this tting has an epoxy coating to protect it from underground

rust and corrosion. Inspect this coating carefully after installation. If any part of this coating

has been nicked, chipped, or scratched, apply a rust proof coating or wrap with anti-corrosion

tape. Be sure that no bare metal is exposed before burying.

Part No. Description

SDR

Plain End Poly

Male Pipe Threads

18-445-005 ½" IPS to ½" MIP

9.3

18-445-007 ¾" IPS to ¾" MIP

18-445-010 1" IPS to 1" MIP

18-445-012 1¼" IPS to 1¼" MIP

18-445-015 1½" IPS to 1½" MIP

18-445-020 2" IPS to 2" MIP

Check homeexunderground.com for up-to-date product listings.

2.4 Anodeless Service Riser

• Required when bringing MDPE Gas Pipe above ground

• 30-inch rise from bottom of trench to top of pipe threads